TF310 Series Crystal 3mm X 10mm Cylindrical AT Strip Cylindrical Crystal RoHS Compliant Thru-Hole Device Frequency Range 3.579545MHz to 65.000MHz Frequency Tolerance / Stability (See Part Number Guide for Options) Operating Temperature Range (See Part Number Guide for Options) Storage Temperature -40°C to +85°C Aging ±5ppm per first year max Shunt Capacitance 5pF Max Load Capacitance 12.5pF Standard (See Part Number Guide for Options) Equivalent Series Resistance (ESR) See ESR Chart Fundamental or 3rd OT Mode of Operation Drive Level 10µW to 100µW recommended, Insulation Resistance 500 Megaohms Min at 100VDC ±15VDC 1 x 10-2 mPa (m3/s) Max Hermeticity of Seal Shock Resistance ±5ppm max (drop test onto a hard wooden board from 75cm) Environmental & Mechanical Detail Shock Marking Detail MIL-STD-883, Method 2002 Cond B Solderability MIL-STD-883, Method 2003 Solvent Resistance MIL-STD-202, Method 215 Vibration MIL-STD-883, Method 2007, Cond A Gross Leak Test MIL-STD-883, Method 1014, Cond C Fine Leak Test MIL-STD-883, Method 1014, Cond A2 MSL 2mW Max Line 1 = Frequency Level 1 per IPC/JEDEC J-STD 20 MMD Monitor/Quartztek 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com [email protected] Revision: Specifications are subject to change without notice. TF310091310D Pg 1 ESR Chart Frequency Range ESR (Ohms) Mode / Cut 3.57954MHz to 5.299MHz 150 Max Fund / AT 5.500MHz to 5.999MHz 100 Max Fund / AT 6.000MHz to 9.999MHz 80 Max Fund / AT 10.000MHz to 11.999MHz 60 Max Fund / AT 12.000MHz to 15.999MHz 50 Max Fund / AT 16.000MHz to 36.000MHz 40 Max Fund / AT 26.000MHz to 36.000MHz 100 Max 3rd OT/AT 36.000MHz to 65.000MHz 80 Max 3rd OT/AT Part Number Guide Frequency TF310 3mm X 10mm Cylindrical Crystal Temperature Tolerance/Stability B = ±30 ppm / ±50 ppm E = ±50 ppm / ±50 ppm F = ±30 ppm / ±30 ppm Operating Temperature D = -10°C to +60°c B = -20°C to +70°c Load Capacitance Blank = 12.5pF Or Specify Please Consult with MMD Sales Deparment for any other Parameters or Options Mechanical Details 10.31 [.406] 10.00 [.394] 3.10 [.122] 0.30 [.012] 1.10 [.043] DIMENSION IN BRACKETS ARE IN INCHES MMD Monitor/Quartztek 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com [email protected] Revision: Specifications are subject to change without notice. TF310091310D Pg 2