SHIELDED SMD POWER INDUCTOR P171207 SERIES • RoHS Compliant Product • Inductance measured : < 100µH : 100KHz, 0.25VRMS • Inductance measured : > 100µH : 1KHz, 0.25VRMS • Inductance Tolerance: K=±10%, L=15±%, M=±20% Add suffix letter for tolerance after the part number • IRATED: Max 10% inductance drop and ∆T=40°C Temp Rise • Operating Temperature: -40°C to +85°C ELECTRICAL SPECIFICATION @ 25°C PART NO L DCR RATED ±20% Max (µH) (W) IDC (A) 1R0 1.0 0.007 10.5 1R2 1.2 0.007 9.80 2R4 2.4 0.012 8.00 3R5 3.5 0.014 7.50 4R7 4.7 0.016 6.80 6R1 6.1 0.018 6.60 7R6 7.6 0.020 5.90 100 10 0.022 5.40 120 12 0.025 4.90 150 15 0.027 4.50 180 18 0.040 3.90 220 22 0.044 3.60 270 27 0.046 3.40 330 33 0.065 3.00 390 39 0.073 2.75 470 47 0.100 2.50 101 100 0.130 1.60 471 470 0.740 0.79 561 560 1.070 0.73 681 680 1.460 0.67 821 820 1.640 0.60 102 1000 1.820 0.55 P171207- Mechanical 0.49 [12.50] max. 0.083 [2.10] 0.49 [12.50] max. 0.201 [5.10] Suggested Pad Layout 0.315 [8.00] max. Schematic Dimensions Unless otherwise specified, all tolerances are: inch: .XX : ± 0.015 .XXX : ±0.004 mm: X,X : ± 0,38 X,XX : ±0,10 Product performance is limited to specified parameter. Data is subject to change without prior notice. 13200 Estrella Ave., Bldg. B Gardena, CA 90248 0.319 [8.10] Tel: (310) 325-1043 Fax: (310) 325-1044 P171207-XX 0602JW www.mpsind.com [email protected]