COMMON MODE CHOKE P52TM12 SERIES • RoHS Compliant Product • Operating Temperature: -40°C to +85°C • Custom design available • Hipot: 2000VRMS (1-2 to 4-3) • Turns Ratio: 1:1 (1-2 to 4-3) • Inductance tested @ 1KHz, 0.1VRMS (1-2, 4-3) • Polarity: 1 and 4 are in phase • Polarity: ∆T of 35°C temperature rise at rated IRMS ELECTRICAL SPECIFICATION @ 25°C PART NO L RATED DCR DIM DIM DIM DIM DIM DIM P52TM12- Min (mH) IRMS (A) Max (mW) A Max B Max C ±0.010" D ±0.010" E Max F ±0.005" 103-8 702-9 502-10 202-12 102-13 501-16 251-18 10.0 7.00 5.00 2.00 1.00 0.50 0.25 8 9 10 12 13 16 18 40 35 25 20 12 7 5 1.35 1.35 1.35 1.35 1.35 1.35 1.35 0.70 0.70 0.70 0.70 0.70 0.70 0.70 0.800 0.800 0.800 0.800 0.800 0.800 0.800 0.400 0.400 0.400 0.400 0.400 0.400 0.400 1.30 1.30 1.30 1.30 1.30 1.30 1.30 0.050 0.050 0.050 0.050 0.050 0.050 0.050 Mechanical Schematic Dimensions Unless otherwise specified, all tolerances are: inch: .XX : ± 0.015 .XX : ±0.004 mm: X,X : ± 0,38 X,XX : ±0,10 Product performance is limited to specified parameter. Data is subject to change without prior notice. 2463 208th, Ste. 205 Torrance, CA 90501 Phone: (310)533-1455 Fax: (310)533-1853 P52TM12-XXX 0547JW http://www.mpsind.com Email: [email protected]