TOROIDAL INDUCTOR P11TJ3 SERIES • RoHS Compliant Product • Operating Temp: -55°C to +105°C • Inductance test @ 10KHz, 0.1VRMS • IDC: 10% inductance drop typ from initial value at rated current • IRMS: ∆30°C temperature rise max at rated current • Add -V for Vertical Mount, -H for Horizontal Mount after part number ELECTRICAL SPECIFICATION @ 25°C PART NUMBER P11TJ31R2-5.5 1R5-4.7 2R2-4.1 2R7-3.7 3R3-3.3 3R9-3 4R7-2.8 5R6-2.5 6R8-2.4 8R2-2.1 100-2 120-1.7 150-1.6 180-1.4 220-1.3 270-1.1 330-1 390-1 470-R9 L (µH) ±15% 10KHz 0.1VRMS 1.2 1.5 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 IDC IRMS (A) 5.50 4.71 4.13 3.67 3.30 3.00 2.75 2.54 2.36 2.06 1.94 1.74 1.57 1.43 1.27 1.14 1.03 0.97 0.87 (A) 10 9.5 9.0 8.4 8.2 7.9 7.5 7.3 7.1 6.6 6.5 6.1 5.9 5.6 4.6 4.4 4.3 3.7 3.5 RDC MAX ( W) 0.006 0.006 0.007 0.008 0.008 0.009 0.010 0.011 0.011 0.013 0.015 0.016 0.016 0.017 0.024 0.026 0.029 0.038 0.043 Mechanical DIM A INCH NOM 0.032 0.003 0.032 0.032 0.032 0.032 0.032 0.032 0.032 0.032 0.032 0.032 0.032 0.032 0.029 0.029 0.029 0.025 0.025 Schematic Dimensions Unless otherwise specified, all tolerances are: inch: .XX : ± 0.008 .XXX : ±0.004 mm: X,X : ± 0,20 X,XX : ±0,10 P11TJ3-XXX Product performance is limited to specified parameter. Data is subject to change without prior notice. 0547JW 13200 Estrella Ave., Bldg. B Gardena, CA 90248 Tel: (310) 325-1043 Fax: (310) 325-1044 www.mpsind.com [email protected] TOROIDAL INDUCTOR P11TJ3 SERIES • RoHS Compliant Product • Operating Temp: -55°C to +105°C • Inductance test @ 10KHz, 0.1VRMS • IDC: 10% inductance drop typ from initial value at rated current • IRMS: ∆30°C temperature rise max at rated current • Add -V for Vertical Mount, -H for Horizontal Mount after part number ELECTRICAL SPECIFICATION @ 25°C PART NUMBER P11TJ3560-R8 680-R7 820-R66 101-R6 121-R55 151-R5 181-R45 221-R4 271-R37 331-R33 391-R3 471-R28 561-R25 681-R23 821-R21 102-R19 122-R17 152-R15 L (µH) ±15% 10KHz 0.1VRMS 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1000 1200 1500 IDC IRMS (A) 0.80 0.73 0.66 0.60 0.55 0.49 0.45 0.40 0.37 0.33 0.30 0.28 0.25 0.23 0.21 0.19 0.17 0.15 (A) 3.1 3.0 2.6 2.4 2.3 1.9 1.8 1.5 1.4 1.2 1.1 1.0 0.9 0.8 0.7 0.7 0.6 0.5 Mechanical RDC MAX ( W) 0.057 0.063 0.087 0.097 0.107 0.146 0.164 0.225 0.250 0.342 0.378 0.510 0.565 0.637 0.849 0.951 1.298 1.476 DIM A INCH NOM 0.023 0.023 0.020 0.020 0.020 0.018 0.018 0.016 0.016 0.014 0.014 0.013 0.013 0.013 0.013 0.011 0.011 0.010 Schematic Dimensions Unless otherwise specified, all tolerances are: inch: .XX : ± 0.008 .XXX : ±0.004 mm: X,X : ± 0,20 X,XX : ±0,10 Product performance is limited to specified parameter. Data is subject to change without prior notice. 13200 Ave.,205 Bldg. B 2463 Estrella 208th, Ste. Gardena, CACA 90248 Torrance, 90501 P11TJ3-XXX 0547JW Tel: (310) 325-1043 http://www.mpsind.com www.mpsind.com Phone: (310)533-1455 Fax: (310) 325-1044 Email: [email protected] [email protected] Fax: (310)533-1853