MBR20100CT Pb-Free Product NCE MOS Barrier Rectifier Description This Schottky rectifier has been optimized for low reverse leakage at high temperature, this product special design for high forward and reverse surge capability Schematic diagram General Features ● VRRM 100V ● IF(AV) 2 x 10 A ● High frequency operation ● Low forward voltage drop ● Center tap package ● Lead free product is acquired ● High Junction Temperature Marking and pin Assignment ● High ESD Protection, IEC Model ±10KV ● High Forward & Reverse Surge capability Application ● Power Supply − Output Rectification ● Power Management ● Instrumentation TO-220 top view Package Marking And Ordering Information Device Marking Device Device Package MBR20100CT MBR20100CT TO-220 Reel Size Tape width Quantity Absolute Maximum Ratings (TA=25℃ unless otherwise noted) Parameter Peak Repetitive Reverse Voltage Average Forward Current Per diode Per device Symbol Limit Unit VRRM 100 V 10 A 20 A IF(AV) Non Repetitive Surge Forward Current(tp=8.3ms sinusoidal) IFSM 180 A Peak Repetitive Reverse Surge Current(Tp=2us) IRRM 0.5 A Maximum operation Junction Temperature Range TJ -50~150 ℃ Tstg -50~150 ℃ Storage Temperature Range Wuxi NCE Power Semiconductor Co., Ltd Page 1 v1.0 MBR20100CT Pb-Free Product Thermal Characteristic Thermal Resistance,Junction-to- Case RθJC 2 ℃/W Electrical Characteristics (TA=25℃unless otherwise noted) Parameter Symbol Condition Min VR IR=0.5mA 100 Typ Max Unit Off Characteristics Reverse Breakdown Voltage Forward Voltage Drop Leakage Current VF (note1) IR IF=10A, TJ=25℃ V 0.78 IF=10A, TJ=125℃ 0.80 V 0.75 V VR=100V, TJ=25℃ 0.01 0.1 mA VR=100V, TJ=125℃ 0.5 5 mA Notes: 1．Pulse width < 300 μs, duty cycle < 2 Wuxi NCE Power Semiconductor Co., Ltd Page 2 v1.0 MBR20100CT Pb-Free Product IF Forward Current TYPICAL ELECTRICAL CHARACTERISTICS VF Forward Voltage (mV) IR Reverse Current Figure 1 Typical Forward Characteristics VR Reverse Voltage (V) Figure 2 Typical Reverse Characteristics Wuxi NCE Power Semiconductor Co., Ltd Page 3 v1.0 MBR20100CT Pb-Free Product TO-220 Package Information Symbol A A1 b b1 c c1 D E E1 e e1 F h L L1 Φ Dimensions In Millimeters Min Max 4.470 4.670 2.520 2.820 0.710 0.910 1.170 1.370 0.310 0.530 1.170 1.370 10.010 10.310 8.500 8.900 12.060 12.460 2.540 TYP 4.980 5.180 2.590 2.890 0.000 0.300 13.400 13.800 3.560 3.960 3.735 3.935 Wuxi NCE Power Semiconductor Co., Ltd Page 4 Dimensions In Inches Min Max 0.176 0.184 0.099 0.111 0.028 0.036 0.046 0.054 0.012 0.021 0.046 0.054 0.394 0.406 0.335 0.350 0.475 0.491 0.100 TYP 0.196 0.204 0.102 0.114 0.000 0.012 0.528 0.543 0.140 0.156 0.147 0.155 v1.0 MBR20100CT Pb-Free Product ATTENTION: ■ ■ ■ ■ ■ ■ ■ ■ ■ Any and all NCE products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your NCE representative nearest you before using any NCE products described or contained herein in such applications. NCE assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all NCE products described or contained herein. Specifications of any and all NCE products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer’s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer’s products or equipment. NCE Semiconductor CO.,LTD. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all NCE products(including technical data, services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of NCE Semiconductor CO.,LTD. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. NCE believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the NCE product that you intend to use. This catalog provides information as of Mar. 2010. Specifications and information herein are subject to change without notice. Wuxi NCE Power Semiconductor Co., Ltd Page 5 v1.0