Ordering number : ENN5890A DD84RCLS Silicon Diffused Junction Type DD84RCLS Damper Diode for Ultrahigh-Definition Display Applications Features [DD84RCLS] 4.5 10.0 3.2 2.8 0.9 1.2 14.0 3.6 1.0 16.1 • unit : mm 1253A 0.6 • High breakdown voltage(VRRM=1500V). High reliability. One-point fixing type plastic molded package facilitating mounting and heat dissipation. Fast forward/reverse recovery time. 16.0 • Package Dimensions 3.5 7.2 • 0.7 0.75 Specifications 2.55 Absolute Maximum Ratings at Ta=25°C Parameter Symbol Repetitive Peak Reverse Voltage Non-repetitive Peak Reverse Voltage Average Output Current Peak Output Current 1 : Cathode 2 : Anode 2.55 SANYO : TO-220FI(LS)-SB Conditions Ratings VRRM VRSM Unit 1500 V 1500 V 8 A IO IOP Surge Forward Current 2 2.4 1 Junction Temperature IFSM Tj Storage Temperature Tstg PW≤100µs, duty≤50% 32 A Sine wave, 10ms 80 A 150 °C --55 to +150 °C Electrical Characteristics at Ta=25°C Parameter Symbol Reverse Voltage VR Forward Voltage VF Reverse Current IR Reverse Recovery Time Forward Recovery Time trr tfr Junction Capacitance Cj Thermal Resistance Rth(j-c) Conditions IR=1mA IF=8A Ratings min typ max 1500 VR=1000V IF=100mA, IR=100mA IF=100mA VR=10V, f=100kHz Junction-Case Unit V 0.1 1.8 V 200 µA 1.5 µs 0.2 90 µs pF 3.4 °C / W Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 91001 GI IM No.5890-1/2 DD84RCLS IF -- VF 5 f=100kHz 3 2 3 Junction Capacitance, Cj -- pF C 0° 20 °C =1 3 2 25 °C 7 10 7 5 Ta Forward Current, IF -- A Cj -- VR 5 1.0 7 5 3 2 2 100 7 5 3 2 10 0.1 7 5 7 5 0.4 0.8 1.2 1.6 2.0 2.4 Thermal Resistance, Rth(j-c) -- °C / W Forward Voltage, VF -- V 2 3 Tc=25˚C 3 2 1.0 7 5 3 2 0.1 7 5 3 2 5 7 2 10 3 5 Reverse Voltage, VR -- V IT03918 Rth(j-c) -- t 10 7 5 0.01 0.1 7 1.0 2.8 7 100 2 IT03915 IFSM -- t 120 Surge Forward Current, IFSM(Peak) -- A 0 Current waveform 50Hz sine wave IS 100 20ms t 80 60 40 20 0 2 3 5 7 1.0 2 3 5 7 10 2 3 Time, t -- ms 5 7 100 2 3 5 71000 IT03916 7 0.01 2 3 5 7 0.1 2 3 5 7 1.0 Time, t -- s 2 3 IT03917 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of September, 2001. Specifications and information herein are subject to change without notice. PS No.5890-2/2