OPA363, OPA2363 OPA364, OPA2364, OPA4364 www.ti.com SBOS259C – SEPTEMBER 2002 – REVISED MAY 2013 1.8V, 7MHz, 90dB CMRR, Single-Supply, Rail-to-Rail I/O Operational Amplifier Check for Samples: OPA363, OPA2363, OPA364, OPA2364, OPA4364 FEATURES DESCRIPTION • • • • • • • • The OPA363 and OPA364 families are highperformance CMOS operational amplifiers optimized for very low voltage, single-supply operation. These miniature, low-cost amplifiers are designed to operate on single supplies from 1.8V (±0.9V) to 5.5V (±2.75V). Applications include sensor amplification and signal conditioning in battery-powered systems. 1 2 1.8V Operation MicroSize Packages Bandwidth: 7MHz CMRR: 90dB (typical) Slew Rate: 5V/μs Low Offset: 500μV (max) Quiescent Current: 750μA/Channel (max) Shutdown Mode: < 1µA/Channel The OPA363 and OPA364 families offer excellent CMRR without the crossover associated with traditional complimentary input stages. This results in excellent performance for driving Analog-to-Digital (A/D) converters without degradation of differential linearity and THD. The input commonmode range includes both the negative and positive supplies. The output voltage swing is within 10mV of the rails. APPLICATIONS • • • • • Signal Conditioning Data Acquisition Process Control Active Filters Test Equipment OPA363 SOT23-5 SOT23-6 OPA364 The OPA363 family includes a shutdown mode. Under logic control, the amplifiers can be switched from normal operation to a standby current that is less than 1μA. OPA2363 X MSOP-10 X X X X TSSOP-14 X SO-14 UQFN-16 OPA4364 X MSOP-8 SO-8 OPA2364 X The single version is available in the MicroSize SOT23-5 (SOT23-6 for shutdown) and SO-8. The dual version is available in MSOP-8, MSOP-10, UQFN-16. and SO-8 packages. Quad packages are available in TSSOP-14 and SO-14 packages. All versions are specified for operation from –40°C to +125°C. X X 1 2 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. All trademarks are the property of their respective owners. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright © 2002–2013, Texas Instruments Incorporated OPA363, OPA2363 OPA364, OPA2364, OPA4364 SBOS259C – SEPTEMBER 2002 – REVISED MAY 2013 www.ti.com This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage. ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more susceptible to damage because very small parametric changes could cause the device not to meet its published specifications. PACKAGE AND ORDERING INFORMATION (1) (1) For the most current package and ordering information, see the Package Option Addendum at the end of this document, or visit the device product folder at www.ti.com. ABSOLUTE MAXIMUM RATINGS (1) Over operating free-air temperature range, unless otherwise noted. Supply voltage Voltage (2) Signal input terminals UNIT +5.5 V –0.5 to (V+) + 0.5 V ±10 mA Output short-circuit (3) Continuous mA Operating temperature, TA –40 to +150 °C Storage temperature, Tstg –65 to +150 °C Junction temperature, TJ +150 °C (1) (2) (3) Current (2) VALUE Stresses above these ratings may cause permanent damage. Exposure to absolute maximum conditions for extended periods may degrade device reliability. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those specified is not implied. Input terminals are diode-clamped to the power-supply rails. Input signals that can swing more than 0.5V beyond the supply rails should be current limited to 10mA or less. Short-circuit to ground, one amplifier per package. ELECTRICAL CHARACTERISTICS: VS = +1.8V to +5.5V Boldface limits apply over the specified temperature range, TA = –40°C to +125°C. At TA = +25°C, RL = 10kΩ connected to VS/2, VOUT = VS/2, and VCM = VS/2, unless otherwise noted. OPAx363, OPAx364 PARAMETER CONDITIONS MIN TYP MAX UNIT 500 μV OFFSET VOLTAGE Input Offset Voltage, OPA363I, OPA364I VOS VS = +5V OPA2363I, OPA2364I OPA363AI, OPA364AI, OPA2363AI, OPA2364AI, OPA4364AI Drift 1 dVOS/dT vs Power Supply PSRR 900 μV 2.5 mV μV/°C 3 VS = 1.8V to 5.5V, VCM = 0 80 Channel Separation, dc 330 μV/V μV/V 1 INPUT BIAS CURRENT Input Bias Current IB ±1 over Temperature ±10 pA See Typical Characteristics Input Offset Current IOS ±1 ±10 pA Input Voltage Noise, f = 0.1Hz to 10Hz en 10 µVPP Input Voltage Noise Density, f = 10kHz en 17 nV/√Hz Input Current Noise Density, f = 10kHz in 0.6 fA/√Hz NOISE INPUT VOLTAGE RANGE Common-Mode Voltage Range VCM Common-Mode Rejection Ratio 2 CMRR Submit Documentation Feedback (V–) – 0.1 (V−) – 0.1V < VCM < (V+) + 0.1V 74 (V+) + 0.1 90 V dB Copyright © 2002–2013, Texas Instruments Incorporated Product Folder Links: OPA363 OPA2363 OPA364 OPA2364 OPA4364 OPA363, OPA2363 OPA364, OPA2364, OPA4364 www.ti.com SBOS259C – SEPTEMBER 2002 – REVISED MAY 2013 ELECTRICAL CHARACTERISTICS: VS = +1.8V to +5.5V (continued) Boldface limits apply over the specified temperature range, TA = –40°C to +125°C. At TA = +25°C, RL = 10kΩ connected to VS/2, VOUT = VS/2, and VCM = VS/2, unless otherwise noted. OPAx363, OPAx364 PARAMETER CONDITIONS MIN TYP MAX UNIT INPUT CAPACITANCE Differential 2 pF Common-Mode 3 pF 100 dB OPEN-LOOP GAIN Open-Loop Voltage Gain RL = 10kΩ, 100mV < VO < (V+) – 100mV AOL 94 OPA4364AI over Temperature VS = 1.8V to 5.5V FREQUENCY RESPONSE Gain-Bandwidth Product Slew Rate dB 86 dB CL = 100pF GBW SR Settling Time, 0.1% tS 0.01% Overload Recovery Time Total Harmonic Distortion + Noise 90 THD+N 7 MHz G = +1 5 V/μs VS = +5V, 4V Step, G = +1 1 µs VS = +5V, 4V Step, G = +1 1.5 µs VIN · Gain > VS 0.8 µs VS = +5V, G = +1, f = 20Hz to 20kHz 0.002 % RL = 10kΩ 10 OUTPUT Voltage Output Swing Over Temperature Short-Circuit Current Capacitive Load Drive RL = 10kΩ 20 V 20 V ISC See Typical Characteristics CLOAD See Typical Characteristics SHUTDOWN (for OPAx363) tOFF 1 tON (1) 20 Vl (shutdown) µs µs (V–) + 0.8 Vh (amplifier is active) 0.75 (V+) IQSD V 5.5 V 0.9 µA 5.5 V µA POWER SUPPLY Specified Voltage Range VS 1.8 Operating Voltage Range 1.8 to 5.5 Quiescent Current (per amplifier) IQ V VS = +1.8V 650 750 VS = +3.6V 850 1000 µA VS = +5.5V 1.1 1.4 mA TEMPERATURE RANGE Specified Range –40 +125 °C Operating Range –40 +150 °C –65 +150 °C Storage Range Thermal Resistance (1) θJA SOT23-5, SOT23-6 200 °C/W MSOP-8, MSOP-10, SO-8 150 °C/W TSSOP-14, SO-14 100 °C/W Part is considered enabled when input offset voltage returns to specified range. Copyright © 2002–2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: OPA363 OPA2363 OPA364 OPA2364 OPA4364 3 OPA363, OPA2363 OPA364, OPA2364, OPA4364 SBOS259C – SEPTEMBER 2002 – REVISED MAY 2013 www.ti.com PIN CONFIGURATION OPA363(1): DBV PACKAGE SOT23-6 (TOP VIEW) OPA364(1): DBV PACKAGE SOT23-5 (TOP VIEW) VOUT 1 V+ +In 3 4 -In +IN B 15 14 13 NC 1 12 NC NC 2 11 Enable B NC 3 10 Enable A NC 4 9 NC A41 V- 2 5 16 5 6 7 8 V- -In -IN B 4 +IN A Enable OUT B 5 -IN A +In 3 V+ V+ A40 V- 2 6 OUT A VOUT 1 OPA2363: RSV PACKAGE UQFN-16 (TOP VIEW) OPA2364: DGK, D PACKAGES MSOP-8, SO-8 (TOP VIEW) OPA363: D PACKAGE SO-8 (TOP VIEW) Out A 1 8 V+ NC 1 8 Enable -In A 2 7 Out B -In 2 7 V+ +In A 3 6 -In B +In 3 6 VOUT V- 4 5 +In B V- 4 5 NC OPA4364: D, PW PACKAGES SO-14, TSSOP-14 (TOP VIEW) OPA364: D PACKAGE SO-8 (TOP VIEW) NC 1 8 NC -In 2 7 V+ +In 3 6 VOUT V- 4 5 NC 14 VOUT D 13 -In D 3 12 +In D V+ 4 11 V- +In B 5 10 +In C VOUT A 1 -In A 2 +In A A B OPA2363: DGS PACKAGE MSOP-10 (TOP VIEW) D C -In B 6 9 -In C VOUT B 7 8 VOUT C (1) Orient according to marking. NOTE: NC = No internal connection. VOUT A 1 -In A 2 +In A 3 10 +V 9 VOUT B 8 -In B A B 4 -V 4 7 +In B Enable A 5 6 Enable B Submit Documentation Feedback Copyright © 2002–2013, Texas Instruments Incorporated Product Folder Links: OPA363 OPA2363 OPA364 OPA2364 OPA4364 OPA363, OPA2363 OPA364, OPA2364, OPA4364 www.ti.com SBOS259C – SEPTEMBER 2002 – REVISED MAY 2013 TYPICAL CHARACTERISTICS At TA = +25°C, RL = 10kΩ connected to VS/2, VOUT = VS/2, and VCM = VS/2, unless otherwise noted. OPEN-LOOP GAIN AND PHASE vs FREQUENCY 120 COMMON-MODE REJECTION RATIO vs FREQUENCY 0 100 -30 80 -60 60 -90 40 -120 20 -150 0 -180 100 90 70 CMRR (dB) Phase (°) Voltage Gain (dB) 80 60 50 40 30 20 10 -20 0 10 100 1k 10k 100k 1M 10M 100M 10 100 1k Frequency (Hz) 10k Figure 1. 1M 10M Figure 2. POWER-SUPPLY REJECTION RATIO vs FREQUENCY 100 100k Frequency (Hz) QUIESCENT CURRENT vs SUPPLY VOLTAGE 1.4 Per Amplifier Quiescent Current (mA) PSRR (dB) 80 60 40 20 1.2 1.0 0.8 0.6 0.4 0 1 10 100 1k 10k 100k 1M 1.5 10M 2.0 2.5 3.0 Figure 3. TOTAL HARMONIC DISTORTION + NOISE RATIO vs FREQUENCY VOUT = -10dBv G = 10, RL = 2kW VS = 1.8V THD+N (%) 0.1 G = 1, RL = 2kW VS = 1.8V G = 1, RL = 2kW VS = 5V 0.0001 100 4.5 5.0 5.5 6.0 TOTAL HARMONIC DISTORTION + NOISE RATIO vs FREQUENCY (VS = 5V, VOUT = 1Vrms) 0.1 0.001 10 1 G = 10, RL = 2kW VS = 5V G = 10, RL = 10kW VS = 1.8V, 5V 0.01 4.0 Figure 4. THD+N (%) 1 3.5 Supply Voltage (V) Frequency (Hz) 1k G = 1, RL = 10kW VS = 1.8V, 5V G = 10, RL = 2kW 0.01 G = 10, RL = 10kW 0.001 G = 1, RL = 2kW G = 1, RL = 10kW 0.0001 10k 100k 10 100 1k Frequency (Hz) Frequency (Hz) Figure 5. Figure 6. Copyright © 2002–2013, Texas Instruments Incorporated 10k Submit Documentation Feedback Product Folder Links: OPA363 OPA2363 OPA364 OPA2364 OPA4364 100k 5 OPA363, OPA2363 OPA364, OPA2364, OPA4364 SBOS259C – SEPTEMBER 2002 – REVISED MAY 2013 www.ti.com TYPICAL CHARACTERISTICS (continued) At TA = +25°C, RL = 10kΩ connected to VS/2, VOUT = VS/2, and VCM = VS/2, unless otherwise noted. INPUT VOLTAGE NOISE SPECTRAL DENSITY vs FREQUENCY 120 Short-Circuit Current (mA) Input Voltage Noise (nV/ÖHz) 1000 SHORT-CIRCUIT CURRENT vs SUPPLY VOLTAGE 100 10 100 +ISC 80 60 40 -ISC 20 0 10 100 1k 10k 100k 1.5 2.0 2.5 Frequency (Hz) 3 2 Output Voltage (V) Input Bias Current (pA) TA = -40°C TA = +25°C TA = +125°C -2 VS = ±1.65V VS = ±2.5V ±30 ±40 ±50 ±60 ±70 0 -2 VCM = +5.1V -4 -6 -8 VCM = -0.1V -10 -0.5 ±80 ±90 ±100 0.5 Output Current (mA) 4.5 INPUT OFFSET CURRENT vs TEMPERATURE INPUT BIAS CURRENT vs TEMPERATURE 10k Input Bias Current (pA) Input Offset Current (pA) 3.5 Figure 10. 100 10 1 0 25 50 Temperature (°C) Figure 11. 6 2.5 Figure 9. 1k -25 1.5 Submit Documentation Feedback 5.5 Common-Mode Voltage (V) 10k -50 5.5 4 VS = ±1.65V -1 ±20 5.0 INPUT BIAS CURRENT vs INPUT COMMON-MODE VOLTAGE VS = ±0.9V ±10 4.5 OUTPUT VOLTAGE SWING vs OUTPUT CURRENT 1 0 4.0 Figure 8. 2 -3 3.5 Figure 7. VS = ±2.5V 0 3.0 Supply Voltage (V) 75 100 125 1k 100 10 1 -50 -25 0 25 50 75 100 125 Temperature (°C) Figure 12. Copyright © 2002–2013, Texas Instruments Incorporated Product Folder Links: OPA363 OPA2363 OPA364 OPA2364 OPA4364 OPA363, OPA2363 OPA364, OPA2364, OPA4364 www.ti.com SBOS259C – SEPTEMBER 2002 – REVISED MAY 2013 TYPICAL CHARACTERISTICS (continued) At TA = +25°C, RL = 10kΩ connected to VS/2, VOUT = VS/2, and VCM = VS/2, unless otherwise noted. SMALL-SIGNAL OVERSHOOT vs LOAD CAPACITANCE SETTLING TIME vs CLOSED-LOOP GAIN 100 60 40 30 20 0.01% Settling Time (ms) Overshoot (%) 50 G = +1 10 0.1% 1 10 G = +10 0.1 0 100 1k 1 100 Closed-Loop Gain (V/V) Figure 13. Figure 14. OFFSET DRIFT DISTRIBUTION OFFSET VOLTAGE PRODUCTION DISTRIBUTION 16 20 Typical Production Distribution of Packaged Units Percent of Amplifiers (%) 14 Percent of Amplifiers (%) 10 Load Capacitance (pF) 15 10 5 12 OPA36xAI 10 8 6 4 2 0 0 0 1 2 3 4 5 6 7 8 9 > 10 -2.5 -2.0 -1.0 0 1.0 2.0 2.5 Offset Voltage (mV) Offset Voltage Drift (mV/°C) Figure 15. Figure 16. OUTPUT ENABLE CHARACTERISTIC (VS = 5V, VOUT = 20kHz Sinusoid) CHANNEL SEPARATION vs FREQUENCY 130 VENABLE Channel Separation (dB) VOUT 120 110 100 90 80 70 60 50 40 50ms/div 10 100 1k 10k 100k 1M 10M Frequency (Hz) Figure 17. Copyright © 2002–2013, Texas Instruments Incorporated Figure 18. Submit Documentation Feedback Product Folder Links: OPA363 OPA2363 OPA364 OPA2364 OPA4364 7 OPA363, OPA2363 OPA364, OPA2364, OPA4364 SBOS259C – SEPTEMBER 2002 – REVISED MAY 2013 www.ti.com TYPICAL CHARACTERISTICS (continued) At TA = +25°C, RL = 10kΩ connected to VS/2, VOUT = VS/2, and VCM = VS/2, unless otherwise noted. LARGE-SIGNAL STEP RESPONSE (CL = 100pF) 1V/div 50mV/div SMALL-SIGNAL STEP RESPONSE (CL = 100pF) 250ns/div 1ms/div Figure 19. Figure 20. APPLICATION INFORMATION The OPA363 and OPA364 series op amps are rail-to-rail operational amplifiers with excellent CMRR, low noise, low offset, and wide bandwidth on supply voltages as low as ±0.9V. The OPA363 features an additional pin for shutdown/ enable function. These families do not exhibit phase reversal and are unity-gain stable. Specified over the industrial temperature range of –40°C to +125°C, the OPA363 and OPA364 families offer precision performance for a wide range of applications. RAIL-TO-RAIL INPUT The OPA363 and OPA364 feature excellent rail-to-rail operation, with supply voltages as low as ±0.9V. The input common-mode voltage range of the OPA363 and OPA364 family extends 100mV beyond supply rails. The unique input topology of the OPA363 and OPA364 eliminates the input offset transition region typical of most railto-rail complimentary stage operational amplifiers, allowing the OPA363 and OPA364 to provide superior common-mode performance over the entire common-mode input range, as seen in Figure 21. This feature prevents degradation of the differential linearity error and THD when driving A/D converters. A simplified schematic of the OPA363 and OPA364 is shown in Figure 22. 1.0 OPA363 and OPA364 0.5 0 VOS (mV) -0.5 -1.0 -1.5 -2.0 Competitors -2.5 -3.0 -3.5 -0.2 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 Common-Mode Voltage (V) Figure 21. OPA363 and OPA364 have Linear Offset Over Entire Common-Mode Range 8 Submit Documentation Feedback Copyright © 2002–2013, Texas Instruments Incorporated Product Folder Links: OPA363 OPA2363 OPA364 OPA2364 OPA4364 OPA363, OPA2363 OPA364, OPA2364, OPA4364 www.ti.com SBOS259C – SEPTEMBER 2002 – REVISED MAY 2013 VS Regulated Charge Pump VOUT = VCC +1.8V VCC + 1.8V IBIAS Patent Pending Very Low Ripple Topology IBIAS VOUT IBIAS VIN- VIN+ IBIAS Figure 22. Simplified Schematic. Copyright © 2002–2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: OPA363 OPA2363 OPA364 OPA2364 OPA4364 9 OPA363, OPA2363 OPA364, OPA2364, OPA4364 SBOS259C – SEPTEMBER 2002 – REVISED MAY 2013 www.ti.com OPERATING VOLTAGE The OPA363 and OPA364 series op amp parameters are fully specified from +1.8V to +5.5V. Single 0.1μF bypass capacitors should be placed across supply pins and as close to the part as possible. Supply voltages higher than 5.5V (absolute maximum) may cause permanent damage to the amplifier. Many specifications apply from –40°C to +125°C. Parameters that vary significantly with operating voltages or temperature are shown in the Typical Characteristics. ENABLE FUNCTION The shutdown (enable) function of the OPA363 is referenced to the negative supply voltage of the operational amplifier. A logic level HIGH enables the op amp. A valid logic HIGH is defined as voltage greater than 75% of the positive supply applied to the enable pin. The valid logic HIGH signal can be as much as 5.5V above the negative supply, independent of the positive supply voltage. A valid logic LOW is defined as less than 0.8V above the negative supply pin. If dual or split power supplies are used, care should be taken to ensure logic input signals are properly referred to the negative supply voltage. This pin should be connected to a valid high or low voltage or driven, not left open circuit. The logic input is a high-impedance CMOS input. Dual op amps are provided separate logic inputs. For batteryoperated applications, this feature may be used to greatly reduce the average current and extend battery life. The enable time is 20μs; disable time is 1μs. When disabled, the output assumes a high-impedance state. This allows the OPA363 to be operated as a “gated” amplifier, or to have its output multiplexed onto a common analog output bus. CAPACITIVE LOAD The OPA363 and OPA364 series op amps can drive a wide range of capacitive loads. However, all op amps under certain conditions may become unstable. Op amp configuration, gain, and load value are just a few of the factors to consider when determining stability. An op amp in unity-gain configuration is the most susceptible to the effects of capacitive load. The capacitive load reacts with the output resistance of the op amp to create a pole in the small-signal response, which degrades the phase margin. In unity gain, the OPA363 and OPA364 series op amps perform well with a pure capacitive load up to approximately 1000pF. The ESR (Equivalent Series Resistance) of the loading capacitor may be sufficient to allow the OPA363 and OPA364 to directly drive very large capacitive loads (> 1μF). Increasing gain enhances the amplifier’s ability to drive more capacitance; see Figure 13. One method of improving capacitive load drive in the unity-gain configuration is to insert a 10Ω to 20Ω resistor in series with the output, as shown in Figure 23. This significantly reduces ringing with large capacitive loads. However, if there is a resistive load in parallel with the capacitive load, it creates a voltage divider introducing a dc error at the output and slightly reduces output swing. This error may be insignificant. For instance, with RL = 10kΩ and RS = 20Ω, there is only about a 0.2% error at the output. V+ RS OPAx363 OPAx364 VIN VOUT 10W to 20W RL CL Figure 23. Improving Capacitive Load Drive 10 Submit Documentation Feedback Copyright © 2002–2013, Texas Instruments Incorporated Product Folder Links: OPA363 OPA2363 OPA364 OPA2364 OPA4364 OPA363, OPA2363 OPA364, OPA2364, OPA4364 www.ti.com SBOS259C – SEPTEMBER 2002 – REVISED MAY 2013 INPUT AND ESD PROTECTION All OPA363 and OPA364 pins are static protected with internal ESD protection diodes tied to the supplies. These diodes will provide overdrive protection if the current is externally limited to 10mA, as stated in the absolute maximum ratings and shown in Figure 24. V+ IOVERLOAD 10mA max VOUT OPAx363 VIN 5kW Figure 24. Input Current Protection ACHIEVING OUTPUT SWING TO THE OP AMP’S NEGATIVE RAIL Some applications require an accurate output voltage swing from 0V to a positive full-scale voltage. A good single supply op amp may be able to swing within a few mV of single supply ground, but as the output is driven toward 0V, the output stage of the amplifier will prevent the output from reaching the negative supply rail of the amplifier. The output of the OPA363 or OPA364 can be made to swing to ground, or slightly below, on a single supply power source. To do so requires use of another resistor and an additional, more negative power supply than the op amp’s negative supply. A pulldown resistor may be connected between the output and the additional negative supply to pull the output down below the value that the output would otherwise achieve as shown in Figure 25. V+ = +5V OPA363 OPA364 VOUT VIN 500mA Op Amp Negative Supply Grounded RP = 10kW -V = -5V (Additional Negative Supply) Figure 25. OPA363 and OPA364 Swing to Ground This technique will not work with all op amps. The output stage of the OPA363 and OPA364 allows the output voltage to be pulled below that of most op amps, if approximately 500μA is maintained through the output stage. To calculate the appropriate value load resistor and negative supply, RL = –V/500μA. The OPA363 and OPA364 have been characterized to perform well under the described conditions, maintaining excellent accuracy down to 0V and as low as –10mV. Limiting and nonlinearity occur below –10mV, with linearity returning as the output is again driven above –10mV. Copyright © 2002–2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: OPA363 OPA2363 OPA364 OPA2364 OPA4364 11 OPA363, OPA2363 OPA364, OPA2364, OPA4364 SBOS259C – SEPTEMBER 2002 – REVISED MAY 2013 www.ti.com BUFFERED REFERENCE VOLTAGE Many single-supply applications require a mid-supply reference voltage. The OPA363 and OPA364 offer excellent capacitive load drive capability, and can be configured to provide a 0.9V reference voltage, as can be seen in Figure 26. For appropriate loading considerations, see the CAPACITIVE LOAD section. V+ V+ R1 10kW OPAx363 OPAx364 0.9V CL = 1mF R2 10kW Figure 26. The OPA363 and OPA364 Provide a Stable Reference Voltage DIRECTLY DRIVING THE ADS8324 AND THE MSP430 The OPA363 and OPA364 series op amps are optimized for driving medium speed (up to 100kHz) sampling A/D converters. However, they also offer excellent performance for higher speed converters. The no crossover input stage of the OPA363 and OPA364 directly drive A/D converters without degradation of differential linearity and THD. They provide an effective means of buffering the A/D converters input capacitance and resulting charge injection while providing signal gain. Figure 27 and Figure 28 show the OPA363 and OPA364 configured to drive the ADS8324 and the 12-bit A/D converter on the MSP430. V+ = 1.8V V+ = 1.8V 100W OPA363 OPA364 ADS8324 VIN 1nF Figure 27. The OPA363 and OPA364 Directly Drive the ADS8324 V+ V+ 100W OPA363 OPA364 VIN MSP430 1nF Figure 28. Driving the 12-Bit A/D Converter on the MSP430 12 Submit Documentation Feedback Copyright © 2002–2013, Texas Instruments Incorporated Product Folder Links: OPA363 OPA2363 OPA364 OPA2364 OPA4364 OPA363, OPA2363 OPA364, OPA2364, OPA4364 www.ti.com SBOS259C – SEPTEMBER 2002 – REVISED MAY 2013 AUDIO APPLICATIONS The OPA363 and OPA364 op amp family has linear offset voltage over the entire input common-mode range. Combined with low-noise, this feature makes the OPA363 and OPA364 suitable for audio applications. Single supply 1.8V operation allows the OPA2363 and OPA2364 to be optimal candidates for dual stereo-headphone drivers and microphone pre-amplifiers in portable stereo equipment, see Figure 29 and Figure 30. 20kW V+ 1mF 20kW One of Right or Left Channel 20kW 20kW 1/2 OPA2363 V+ 10kW V- One of Right or Left Headphone Out 1/2 TPS6100 47pF V- 10kW Internally Biased V- Figure 29. OPA2363 Configured as Half of a Dual Stereo Headphone Driver 49kW Clean 3.3V Supply 3.3V 4kW OPAx363 OPAx364 Electret Microphone 6kW VOUT 5kW 1mF Figure 30. Microphone Preamplifier Copyright © 2002–2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: OPA363 OPA2363 OPA364 OPA2364 OPA4364 13 OPA363, OPA2363 OPA364, OPA2364, OPA4364 SBOS259C – SEPTEMBER 2002 – REVISED MAY 2013 www.ti.com ACTIVE FILTERING Low harmonic distortion and noise specifications plus high gain and slew rate make the OPA363 and OPA364 optimal candidates for active filtering. Figure 31 shows the OPA2363 configured as a low-distortion, 3rd-order GIC (General Immittance Converter) filter. Figure 32 shows the implementation of a Sallen-Key, 3-pole, low-pass Bessel filter. VIN R1 R3 3.92kW 1.33kW 2 OPA363 R11 3.92kW R12 3.92kW 7 1/2 OPA2363 2 VOUT C4 1000pF 3 6 6 3 1/2 OPA2363 1 C13 1000pF 5 R14 3.48kW C15 1000pF Figure 31. The OPA2363 as a 3rd-Order, 40kHz, Low-Pass GIC Filter 220pF 1.8kW 19.5kW 150kW VIN = 1Vrms 3.3nF 47pF OPA363 VOUT Figure 32. The OPA363 or OPA364 Configured as a 3-Pole, 20kHz, Sallen-Key Filter 14 Submit Documentation Feedback Copyright © 2002–2013, Texas Instruments Incorporated Product Folder Links: OPA363 OPA2363 OPA364 OPA2364 OPA4364 OPA363, OPA2363 OPA364, OPA2364, OPA4364 www.ti.com SBOS259C – SEPTEMBER 2002 – REVISED MAY 2013 REVISION HISTORY NOTE: Page numbers for previous versions may differ from page numbers in the current version. Changes from Revision B (February 2003) to Revision C Page • Converted data sheet to current format ................................................................................................................................ 1 • Added RSV package (UQFN-16) to data sheet .................................................................................................................... 1 Copyright © 2002–2013, Texas Instruments Incorporated Submit Documentation Feedback Product Folder Links: OPA363 OPA2363 OPA364 OPA2364 OPA4364 15 PACKAGE OPTION ADDENDUM www.ti.com 26-Jun-2013 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish (2) MSL Peak Temp Op Temp (°C) Device Marking (3) (4/5) OPA2363AIDGSR ACTIVE VSSOP DGS 10 2500 Green (RoHS CU NIPDAUAG Level-2-260C-1 YEAR & no Sb/Br) -40 to 125 BHK OPA2363AIDGSRG4 ACTIVE VSSOP DGS 10 2500 Green (RoHS CU NIPDAUAG Level-2-260C-1 YEAR & no Sb/Br) -40 to 125 BHK OPA2363AIDGST ACTIVE VSSOP DGS 10 250 Green (RoHS CU NIPDAUAG Level-2-260C-1 YEAR & no Sb/Br) -40 to 125 BHK OPA2363AIDGSTG4 ACTIVE VSSOP DGS 10 250 Green (RoHS CU NIPDAUAG Level-2-260C-1 YEAR & no Sb/Br) -40 to 125 BHK OPA2363AIRSVR ACTIVE UQFN RSV 16 3000 Green (RoHS & no Sb/Br) Level-1-260C-UNLIM -40 to 125 SIN OPA2363IDGSR ACTIVE VSSOP DGS 10 2500 Green (RoHS CU NIPDAUAG Level-2-260C-1 YEAR & no Sb/Br) -40 to 125 BHK OPA2363IDGSRG4 ACTIVE VSSOP DGS 10 2500 Green (RoHS CU NIPDAUAG Level-2-260C-1 YEAR & no Sb/Br) -40 to 125 BHK OPA2363IDGST ACTIVE VSSOP DGS 10 250 Green (RoHS CU NIPDAUAG Level-2-260C-1 YEAR & no Sb/Br) -40 to 125 BHK OPA2363IDGSTG4 ACTIVE VSSOP DGS 10 250 Green (RoHS CU NIPDAUAG Level-2-260C-1 YEAR & no Sb/Br) -40 to 125 BHK OPA2364AID ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR -40 to 125 OPA 2364 A OPA2364AIDG4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR -40 to 125 OPA 2364 A OPA2364AIDGKR ACTIVE VSSOP DGK 8 2500 Green (RoHS CU NIPDAUAG Level-2-260C-1 YEAR & no Sb/Br) -40 to 125 BHL OPA2364AIDGKRG4 ACTIVE VSSOP DGK 8 2500 Green (RoHS CU NIPDAUAG Level-2-260C-1 YEAR & no Sb/Br) -40 to 125 BHL OPA2364AIDGKT ACTIVE VSSOP DGK 8 250 Green (RoHS CU NIPDAUAG Level-2-260C-1 YEAR & no Sb/Br) -40 to 125 BHL OPA2364AIDGKTG4 ACTIVE VSSOP DGK 8 250 Green (RoHS CU NIPDAUAG Level-2-260C-1 YEAR & no Sb/Br) -40 to 125 BHL OPA2364AIDR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) -40 to 125 OPA 2364 A CU NIPDAU CU NIPDAU Addendum-Page 1 Level-2-260C-1 YEAR Samples PACKAGE OPTION ADDENDUM www.ti.com 26-Jun-2013 Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish (2) MSL Peak Temp Op Temp (°C) Device Marking (3) (4/5) OPA2364AIDRG4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR -40 to 125 OPA 2364 A OPA2364ID ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR -40 to 125 OPA 2364 OPA2364IDG4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR -40 to 125 OPA 2364 OPA2364IDGKR ACTIVE VSSOP DGK 8 2500 Green (RoHS CU NIPDAUAG Level-2-260C-1 YEAR & no Sb/Br) -40 to 125 BHL OPA2364IDGKRG4 ACTIVE VSSOP DGK 8 2500 Green (RoHS CU NIPDAUAG Level-2-260C-1 YEAR & no Sb/Br) -40 to 125 BHL OPA2364IDGKT ACTIVE VSSOP DGK 8 250 Green (RoHS CU NIPDAUAG Level-2-260C-1 YEAR & no Sb/Br) -40 to 125 BHL OPA2364IDGKTG4 ACTIVE VSSOP DGK 8 250 Green (RoHS CU NIPDAUAG Level-2-260C-1 YEAR & no Sb/Br) -40 to 125 BHL OPA2364IDR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR -40 to 125 OPA 2364 OPA2364IDRG4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR -40 to 125 OPA 2364 OPA363AID ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR -40 to 125 OPA 363 A OPA363AIDBVR ACTIVE SOT-23 DBV 6 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR -40 to 125 A40 OPA363AIDBVRG4 ACTIVE SOT-23 DBV 6 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR -40 to 125 A40 OPA363AIDBVT ACTIVE SOT-23 DBV 6 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR -40 to 125 A40 OPA363AIDBVTG4 ACTIVE SOT-23 DBV 6 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR -40 to 125 A40 OPA363AIDG4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR -40 to 125 OPA 363 A OPA363ID ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR -40 to 125 OPA 363 OPA363IDBVR ACTIVE SOT-23 DBV 6 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR -40 to 125 A40 Addendum-Page 2 Samples PACKAGE OPTION ADDENDUM www.ti.com 26-Jun-2013 Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish (2) MSL Peak Temp Op Temp (°C) Device Marking (3) (4/5) OPA363IDBVRG4 ACTIVE SOT-23 DBV 6 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR -40 to 125 A40 OPA363IDBVT ACTIVE SOT-23 DBV 6 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR -40 to 125 A40 OPA363IDBVTG4 ACTIVE SOT-23 DBV 6 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR -40 to 125 A40 OPA363IDG4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR -40 to 125 OPA 363 OPA364AID ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR -40 to 125 OPA 364 A OPA364AIDBVR ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR -40 to 125 A41 OPA364AIDBVRG4 ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR -40 to 125 A41 OPA364AIDBVT ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR -40 to 125 A41 OPA364AIDBVTG4 ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR -40 to 125 A41 OPA364AIDG4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR -40 to 125 OPA 364 A OPA364AIDR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR -40 to 125 OPA 364 A OPA364AIDRG4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR -40 to 125 OPA 364 A OPA364ID ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR -40 to 125 OPA 364 OPA364IDBVR ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR -40 to 125 A41 OPA364IDBVRG4 ACTIVE SOT-23 DBV 5 3000 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR -40 to 125 A41 OPA364IDBVT ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR -40 to 125 A41 Addendum-Page 3 Samples PACKAGE OPTION ADDENDUM www.ti.com 26-Jun-2013 Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish (2) MSL Peak Temp Op Temp (°C) Device Marking (3) (4/5) OPA364IDBVTG4 ACTIVE SOT-23 DBV 5 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR -40 to 125 A41 OPA364IDG4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR -40 to 125 OPA 364 OPA364IDR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR -40 to 125 OPA 364 OPA364IDRG4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR -40 to 125 OPA 364 OPA4364AID ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR -40 to 125 OPA4364A OPA4364AIDG4 ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR -40 to 125 OPA4364A OPA4364AIDR ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR -40 to 125 OPA4364A OPA4364AIDRG4 ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR -40 to 125 OPA4364A OPA4364AIPWR ACTIVE TSSOP PW 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR -40 to 125 OPA 4364A OPA4364AIPWRG4 ACTIVE TSSOP PW 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR -40 to 125 OPA 4364A OPA4364AIPWT ACTIVE TSSOP PW 14 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR -40 to 125 OPA 4364A OPA4364AIPWTG4 ACTIVE TSSOP PW 14 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEAR -40 to 125 OPA 4364A (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Addendum-Page 4 Samples PACKAGE OPTION ADDENDUM www.ti.com 26-Jun-2013 Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. (4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device. (5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation of the previous line and the two combined represent the entire Device Marking for that device. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. OTHER QUALIFIED VERSIONS OF OPA4364 : • Automotive: OPA4364-Q1 NOTE: Qualified Version Definitions: • Automotive - Q100 devices qualified for high-reliability automotive applications targeting zero defects Addendum-Page 5 PACKAGE MATERIALS INFORMATION www.ti.com 24-Jul-2013 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing OPA2363AIDGSR VSSOP DGS 10 OPA2363AIDGST VSSOP DGS OPA2363AIRSVR UQFN RSV OPA2363IDGSR VSSOP OPA2363IDGST SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant 2500 330.0 12.4 5.3 3.4 1.4 8.0 12.0 Q1 10 250 180.0 12.4 5.3 3.4 1.4 8.0 12.0 Q1 16 3000 177.8 12.4 2.0 2.8 0.7 4.0 12.0 Q1 DGS 10 2500 330.0 12.4 5.3 3.4 1.4 8.0 12.0 Q1 VSSOP DGS 10 250 180.0 12.4 5.3 3.4 1.4 8.0 12.0 Q1 OPA2364AIDGKR VSSOP DGK 8 2500 330.0 12.4 5.3 3.4 1.4 8.0 12.0 Q1 OPA2364AIDGKT VSSOP DGK 8 250 180.0 12.4 5.3 3.4 1.4 8.0 12.0 Q1 OPA2364AIDR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 OPA2364IDGKR VSSOP DGK 8 2500 330.0 12.4 5.3 3.4 1.4 8.0 12.0 Q1 OPA2364IDGKT VSSOP DGK 8 250 180.0 12.4 5.3 3.4 1.4 8.0 12.0 Q1 OPA2364IDR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 OPA363AIDBVR SOT-23 DBV 6 3000 180.0 8.4 3.2 3.1 1.39 4.0 8.0 Q3 OPA363AIDBVT SOT-23 DBV 6 250 180.0 8.4 3.2 3.1 1.39 4.0 8.0 Q3 OPA363IDBVR SOT-23 DBV 6 3000 180.0 8.4 3.2 3.1 1.39 4.0 8.0 Q3 OPA363IDBVT SOT-23 DBV 6 250 180.0 8.4 3.2 3.1 1.39 4.0 8.0 Q3 OPA364AIDBVR SOT-23 DBV 5 3000 180.0 8.4 3.2 3.1 1.39 4.0 8.0 Q3 OPA364AIDBVT SOT-23 DBV 5 250 180.0 8.4 3.2 3.1 1.39 4.0 8.0 Q3 OPA364AIDR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 Pack Materials-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 24-Jul-2013 Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) OPA364IDBVR SOT-23 DBV 5 3000 180.0 8.4 OPA364IDBVT SOT-23 DBV 5 250 180.0 8.4 B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant 3.2 3.1 1.39 4.0 8.0 Q3 3.2 3.1 1.39 4.0 8.0 Q3 OPA364IDR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 OPA4364AIDR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1 OPA4364AIPWR TSSOP PW 14 2500 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1 OPA4364AIPWT TSSOP PW 14 250 180.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) OPA2363AIDGSR VSSOP DGS 10 2500 367.0 367.0 35.0 OPA2363AIDGST VSSOP DGS 10 250 210.0 185.0 35.0 OPA2363AIRSVR UQFN RSV 16 3000 202.0 201.0 28.0 OPA2363IDGSR VSSOP DGS 10 2500 367.0 367.0 35.0 OPA2363IDGST VSSOP DGS 10 250 210.0 185.0 35.0 OPA2364AIDGKR VSSOP DGK 8 2500 367.0 367.0 35.0 OPA2364AIDGKT VSSOP DGK 8 250 210.0 185.0 35.0 OPA2364AIDR SOIC D 8 2500 367.0 367.0 35.0 OPA2364IDGKR VSSOP DGK 8 2500 367.0 367.0 35.0 OPA2364IDGKT VSSOP DGK 8 250 210.0 185.0 35.0 OPA2364IDR SOIC D 8 2500 367.0 367.0 35.0 Pack Materials-Page 2 PACKAGE MATERIALS INFORMATION www.ti.com 24-Jul-2013 Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) OPA363AIDBVR SOT-23 DBV 6 3000 210.0 185.0 35.0 OPA363AIDBVT SOT-23 DBV 6 250 210.0 185.0 35.0 OPA363IDBVR SOT-23 DBV 6 3000 210.0 185.0 35.0 OPA363IDBVT SOT-23 DBV 6 250 210.0 185.0 35.0 OPA364AIDBVR SOT-23 DBV 5 3000 210.0 185.0 35.0 OPA364AIDBVT SOT-23 DBV 5 250 210.0 185.0 35.0 OPA364AIDR SOIC D 8 2500 367.0 367.0 35.0 OPA364IDBVR SOT-23 DBV 5 3000 210.0 185.0 35.0 OPA364IDBVT SOT-23 DBV 5 250 210.0 185.0 35.0 OPA364IDR SOIC D 8 2500 367.0 367.0 35.0 OPA4364AIDR SOIC D 14 2500 367.0 367.0 38.0 OPA4364AIPWR TSSOP PW 14 2500 367.0 367.0 35.0 OPA4364AIPWT TSSOP PW 14 250 210.0 185.0 35.0 Pack Materials-Page 3 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in safety-critical applications. In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. Nonetheless, such components are subject to these terms. No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use. Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of non-designated products, TI will not be responsible for any failure to meet ISO/TS16949. Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP® Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Applications Processors www.ti.com/omap TI E2E Community e2e.ti.com Wireless Connectivity www.ti.com/wirelessconnectivity Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2013, Texas Instruments Incorporated