RGB-9130 175 MHz Hi-Resolution RGB/Video Three-Fiber 175 MHz RGB System For Ultra High Resolution Remote Displays The RGB-9130 is a Amplitude Modulated (AM), LED- or Laser-based RGB Video transmission system, with Sync accepted on all on three channels. It is ideal for the extension of any high resolution Video signal such as a CAD / CAM graphics workstation. Units come with a built-in Automatic Gain Control (AGC) to maintain constant Video output for each color, and a status indicator for Power On. System Design All units come in a small module or Insert Card version. The cards can be inserted into our 18 slot, 19" rackmountable card cage (CC-18), or one of our smaller Desk Top Card Racks (DTCR series). The Desk Top Card Racks can handle one, two, four, or seven cards, allowing for greater flexibility and future expansion. They can sit on a flat surface as a larger Stand Alone unit, or can be surface mounted with the flanges provided. Each one of our card housings operates with an appropriate power supply. The regulated switching power supply has short circuit protection, and an input operating voltage of 85265 VAC. Features • Ultra-high resolution (1792 x 1536) • Multimode operation over three fibers • 175 MHz video bandwidth • Ideal for radar applications • True DC restoration • Flat frequency Response • Complies with RS-170, RS-170A & 343 EIA standards • No EMI or RFI and no ground loops • Stand Alone or Rack Mount • Ideal for CAD/CAM workstation extensions 865 Type Mode Wavelength Suffix • • LED MM L1 • Laser 1310 1550 SM L2 Output Power Receiver Sensitivity Optical Loss Budget Range* Conn Type 50 /125µ -13 dBm -20 dBm 7 dB 1 km ST 62.5/125µ -10 dBm -20 dBm 10 dB 2 km ST 09/125µ -8 dBm -20 dBm 12 dB 5 km FC/UPC Fiber Type * Chromatic dispersion and additional losses should be taken into account 800-867-8426 • [email protected] • www.opticomm.com • Contact Opticomm for custom requirements. RGB/VGA/DVI Hi-Res Video Transmission Video Video in/out impedance Video in/out level Video bandwidth Grayscale linearity distortion Pixel intensity distortion Linearity Tilt Maximun horizontal frequency Maximum refresh rate Signal to noise ratio Connector type General Dimensions & Weight Operating temperature Storage temperature Humidity Operating voltage Vibration Shock Diagnostics Status monitoring Sample Configuration 75 Ω 1 volt peak to peak, 0.7 volts without sync 10 Hz to 175 MHz @ -3dB < 2.0 % typical < 2.0° typical ± 1.1 % typical ≤ 0.5 % typical 128 KHz 120 KHz >52 dB using RS-250C standards @ 1 km BNC Stand Alone (SA): 7.16” L x 5.21” W x 0.94” H 30 oz Insert card (IC): 6.3” L x 0.8” W x 4.0” H 16 oz -20° C to +70° C -30° C to +85° C 0 to 95% non-condensing 12 VDC (200 mA) or 24 VAC (300mA) or 110/220 VAC Up to 5 g's Up to 12 g's LED indicator Emissions: FCC Part 15, ICES-003, AS/NZS, 3548, EN55022 Immunity: ENVS0204, EN61000-4-2,3,4,5,6,11 Safety: UL1950, CAN/CSA 22.2, NO.950-95 MADE IN THE USA