RGB-4500 Single Fiber Hi-Res Video, Duplex Audio & RS-232 Duplex Data One Channel, 160MHz Monochrome and Full Duplex Audio & RS-232 Data System for Ultra Hi-Resolution Remote Displays over One Fiber The RGB-4500 is an Amplitude Modulated (AM), Laser-based monochrome-compatible Video transmission system with Sync accepted on green, with one channel Full Duplex Audio and RS-232 Full Duplex Async Data. All signals are CWDM over one singlemode fiber. It is ideal for the extension of a high resolution radar Video signal with intercomm Audio and Async Data operation graphics workstation. Units come with a built-in Automatic Gain Control (AGC) to maintain constant Video, Audio and Data output, and a status indicator for Power On. Features • Ultra high-resolution (1792 x 1536) • Single-mode CWDM operation over one fiber System Design • 160 MHz video bandwidth All units come in a 19” rack mount 1RU housing, which consists of a Video card and Audio & Data cards, all assembled in a 1RU unit, allowing for greater flexibility and future expansion. The unit can be rack mounted (RM) with the ear flanges provided (option: unit can sit on a flat surface as a standalone (SA) unit with no ears). Each unit operates with an appropriate internal power supply. The regulated switching power supply has short circuit protection, and an input operating voltage of 85-265 VAC. 1510 1530 1550 CWDM CWDM CWDM Type • • • Laser • Ideal for radar applications • True DC restoration • Flat frequency Response • Complies with RS-170, RS-170A & 343 EIA standards • No EMI or RFI and no ground loops • 19” 1RU rack-mountable (Optional 17” Standalone) • Ideal for graphics workstation extensions Mode Wavelength Suffix Fiber Type Output Power Receiver Sensitivity Optical Loss Budget Range* Conn Type SM L4 09/125µ -8 dBm -20 dBm 12 dB 5 km FC * Chromatic dispersion and additional losses should be taken into account 800-867-8426 • [email protected] • www.opticomm.com • Contact Opticomm for custom requirements. RGB/VGA/DVI Video Video in/out impedance Video in/out level Video bandwidth Grayscale linearity distortion Pixel intensity distortion Linearity Tilt Maximum horizontal frequency Maximum refresh rate Signal to noise ratio Connector type 75 Ω 1 volt peak to peak, 0.7 volts without sync 10 Hz to 160 MHz @ -3dB < 2.0 % typical < 2.0° typical ± 1.1 % typical ≤ 0.5 % typical 128 KHz 120 KHz >52 dB using RS-250C standards @ 1 km BNC Audio Channels Audio in/out impedance Audio in/out level Frequency response Signal to noise ratio Total harmonic distortion Connector type Communication Platform Network Management SDI & HD-SDI Composite Video, Audio & Data RGB/VGA/DVI Audio/FSK/Intercom Data (Ethernet/Serial/USB) CATV/RF & L-Band 1 Duplex Audio @ 24 bits 600Ω or 47kΩ - balanced or unbalanced -6 to +6 dBm 10 Hz to 20 KHz @ -3dB > 90 dB @ 1 kHz (weighted) < 1.0 %, 1 KHz at maximum modulation MIcro DB25 Data RS-232 Connector type Optiva™ Configurable DC-1 Mbps Pin Male MIcro DB25 Optical Switching, Routing & Redundancy Passive Multiplexing Solutions Enclosures, Racks & Frames Power Supplies & Accessories General Dimensions Material Operating temperature Storage temperature Humidity Operating voltage 1RU Rack Mount (RM): 19” L X 7.25” W X 1.75” H (Optional: Standalone (SA): 17” L X 7.25” W X 1.75” H) Aluminum casing -20° C to +70° C -30° C to +85° C 0 to 95% non-condensing 85-265 VAC50/60 Hz @ 100 mA Diagnostics Status monitoring LED indication Emissions: FCC Part 15, ICES-003, AS/NZS, 3548, EN55022 Immunity: ENVS0204, EN61000-4-2,3,4,5,6,11 Safety: UL1950, CAN/CSA 22.2, NO.950-95 MADE IN THE USA Sample Configuration