Oscilent Corporation IF SAW Filter | 815-IF43.75M-A Page 1 of 1 IF SAW Filter Part Number Package Application Last Modified 815-IF43.75M-A 15.9 x 5.9 Thru Hole Digital Cable TV May 22 2003 . TYPE : 43.75 MHz Bandpass Filter 6.0 MHz Bandwidth PART NUMBER : 815-IF43.75M-A .. OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Minimum Typical Maximum Units Center Frequency - 43.75 - MHz Insertion Loss - 16.0 17.0 dB 3 dB Bandwidth 5.8 6.0 - MHz 35 dB Bandwidth - 7.8 8.0 MHz Lower Sidelobe (35.0 ~ 39.90 MHz) 40 43 - dB Upper Sidelobe (47.85 ~ 50.0 MHz) 35 38 - dB Upper Sidelobe (50.0 ~ 55.0 MHz) 38 42 - dB Passband Ripple - 0.6 1.0 dB Ambient Temperature - 25 - °C * Custom SAW IF Filters available. Contact Oscilent for assistance. . PACKAGE OUTLINE (mm) TEST FIXTURE Source Impedance = 50 ohms Load Impedance = 2 Kohms / 3pF Part No.: 815-IF43.75M-A Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map http://www.oscilent.com/spec_pages/if_sawfilter/if_815_if43_75a.htm 12/28/2005