Oscilent Corporation IF SAW Filter | 815-IF115.24M-A Page 1 of 2 IF SAW Filter Part Number Package Application Last Modified 815-IF115.24M-A 15.9 x 5.9 Thru Hole Digital Broadcasting May 02 2003 . TYPE : 115.24 MHz Bandpass Filter 2.8 MHz Bandwidth PART NUMBER : 815-IF115.24M-A . Horizontal : 1.0 MHz/Div Veritical : 10 dB/Div Horizontal : 0.5 MHz/Div Veritical : 1 dB/Div Veritical : 100 ns/Div . OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Minimum Typical Maximum Units 115.19 115.24 115.29 MHz - 21 24 dB 1.5dB Bandwidth 2..8 2.88 - MHz 30dB Bandwidth - 4.3 4.5 MHz 40dB Bandwidth - 4.45 4.7 MHz Passband Ripple - 0.7 1.0 dB Group Delay Variation - 77 100 nsec Center Frequency Insertion Loss - 1.68 - µsec Ultimate Rejection 40 45 - dB Substrate Material - LT - - Ambient Temperature - 25 - °C Absolute Delay * Custom SAW IF Filters available. Contact Oscilent for assistance. . PACKAGE OUTLINE (mm) TEST FIXTURE http://www.oscilent.com/spec_pages/if_sawfilter/if_815_if115_24a.htm 12/28/2005 Oscilent Corporation IF SAW Filter | 815-IF115.24M-A Page 2 of 2 Source/Load Impedance = 50 ohms Part No.: 815-IF115.24M-A Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map http://www.oscilent.com/spec_pages/if_sawfilter/if_815_if115_24a.htm 12/28/2005