PANDUIT 650138-000

SPECIFICATION CONTROL DRAWING
Product
Name
Prod.
Rev.
D-436-0096
Q
D-436-0097
S
D-436-0098
D
L
max
29.2
(1.150)
29.2
(1.150)
29.2
(1.150)
Product Dimensions
E
øA
min
min
24.15
2.16
(0.950)
(0.085)
24.15
2.80
(0.950)
(0.110)
24.15
4.32
(0.950)
(0.170)
Wire Dimensions
øD
min
max
0.63
2.16
(0.025)
(0.085)
0.63
2.80
(0.025)
(0.110)
0.63
4.32
(0.025)
(0.170)
Color
Red
Blue
Yellow
MATERIALS
1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride.
2. SEALING RINGS: Immersion resistant thermoplastic. Color: one clear, one color coded (see table).
APPLICATION
1. These parts are designed to provide an immersion resistant seal on 1 to 1 splices made of wires having an insulation rated for
at least +135C.
2. Temperature range: -55C to +150C.
3. Parts may be installed by convection heating.
Wire dimension:
TITLE:
TE Connectivity
300 Constitution Drive,
Menlo Park, CA. 94025, U.S.A.
Unless otherwise specified dimensions are in millimeters.
[Inches dimensions are shown in brackets]
TOLERANCES:
0.00 N/A
0.0 N/A
0 N/A
PREPARED BY:
SEALING SLEEVE
Raychem
DOCUMENT NO.:
D-436-0096/-0098
ANGLES: N/A
TE Connectivity reserves the right to amend
this drawing at any time. Users should evaluate
ROUGHNESS IN
the suitability of the product for their
MICRON
application.
DCR NUMBER:
REPLACES:
PROD. REV.:
SEE TABLE
CAGE CODE :
DOC. ISSUE:
DATE:
4
SCALE:
16-Apr-11
SIZE:
SHEET:
mforonda
D050379
D981035
06090
--A
1 of 1
Print Date: 9-May-11
© 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. Company. All Rights Reserved.
If this document is printed it becomes uncontrolled. Check for the latest revision.