SPECIFICATION CONTROL DRAWING Product Revision Product Name B-040-20-N D B-040-22-N D B-040-24-N D B-040-26-N D B-040-28-N D B-040-30-N D L max 30.0 (1.180) Component Dimensions øA øB øC min min min 4.40 (0.175) 2.80 (0.110) 1.60 (0.060) “GA” Wire Gauge (AWG) 20 22 24 26 28 30 øD øE 1.70 (0.065) to 4.40 (0.175) 1.50 (0.060) to 2.80 (0.110) Cable Dimensions øF G±0.5 min (G±0.02) 0.30 (0.012) 16.0 (0.630) M±0.5 (M±0.02) 6.0 (0.235) MATERIALS 1. & 5. INSULATION SLEEVE: Heat-shrinkable, radiation cross-linked modified polyvinylidene fluoride. Transparent blue. 2. & 4. SOLDER PREFORMS WITH FLUX: SOLDER: TYPE Sn63 per ANSI J-STD-006. FLUX: TYPE ROL1 per ANSI J-STD-004. 3. & 6. MELTABLE RINGS: Thermally stabilized thermoplastic. 7. CONDUCTOR LEAD: MIL-W-22759/32-GA-9, AWG “GA” (see table). ETFE insulated, stranded tin plated copper. Color: white. 8. GROUND LEAD: MIL-W-22759/32-GA-6, AWG “GA” (see table). ETFE insulated, stranded tin plated copper. Color: blue. APPLICATION 1. The parts covered by this SCD are for use in terminating the primary conductor and the braided shield of a coaxial cable having tin or silver plated conductor and shield, rated for at least 125° C and meeting the dimensional requirements listed. 2. Parts will meet the requirements of Raychem Specification RT-1404 when installed per Raychem RPIP-500-03. 3. Temperature range: -55°C to +150°C. For best results, prepare the cable as shown: TE Connectivity 305 Constitution Drive Menlo Park, CA 94025, USA Raychem Products UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS. INCHES DIMENSIONS ARE BETWEEN BRACKETS. TOLERANCES: ANGLES: N/A TE Connectivity reserves the right to amend this 0.00 N/A drawing at any time. Users should evaluate the 0.0 N/A ROUGHNESS IN suitability of the product for their application. 0 N/A MICRON DRAWN BY: REPLACES: DCR NUMBER: M. FORONDA D000433 D000581 TITLE: COAXIAL SOLDERSLEEVE DEVICE WITH PRE-INSTALLED STRANDED WIRES DOCUMENT NO.: B-040-GA-N DATE: DOC ISSUE: 15-Apr-11 PROD. REV. SEE TABLE Print Date: 9-May-11 If this document is printed it becomes uncontrolled. Check for the latest revision. 3 SCALE: None SIZE: A SHEET: 1 of 1