FEATURES PETERMANN TECHNIK - HIGH RELIABILITY FOR LOW COST Time & Frequency Components - PECL OUTPUT SIGNAL - COMPLEMENTARY OUTPUT OPTION - JITTER OPTIMIZED SMALL SMD-OSCILLATOR - EXCELLENT CLOCK SIGNAL GENERATOR FOR TELECOM AND TRANSMISSION SYSTEMS - EXTENDED TEMPERATURE RANGE TO -40/+85°C SMD-OSCILLATOR SERIES PACKAGE FREQUENCY RANGE M6307 Ceramic 7.2 x 5.2 x 1.8 mm³ 48.0 ~ 180.0 MHz VS. TEMPERATURE +-25 ~ +-100 ppm VS. SUPPLY VOLTAGE +-5 ppm max. FREQUENCY STABILITY VS. LOAD +-1 ppm max. VS. AGING +-5 ppm max. / 1 year OPERATING TEMPERATURE RANGE 0/+70°C ~ -40/+85°C -55/+125°C STORAGE TEMPERATURE RANGE +3.3 VDC +-5% VOLTAGE INPUT 100 mA max. CURRENT STANDARD 40/60% @VDD-1.3V Level SYMMETRY OPTION 45/55% @VDD-1.3V Level RISE AND FALL TIME PECL 1.5 ns max. @20 ~ 80% PECL OUTPUT "0" LEVEL VDD -1.62V max. PECL 3.3 VOLT "1" LEVEL VDD -1.02V min. 50 Ω to VDD -2VDC LOAD PECL SEE OUTLINE DRAWING PIN CONNECTION 10 ms max. START-UP TIME 10 ps typ. @ 155.52 MHz PERIOD JITTER RMS TAPE & REEL / 1.000 pcs per reel DELIVERY FORM OTHER PARAMETERS ARE AVAILABLE ON REQUEST / CREATE HERE YOUR SPECIFICATION PART NUMBERING SYSTEM EXAMPLE SERIES FREQUENCY STABILITY VS. TEMPERATURE TEMPERATURE RANGE SYMMETRY TRI-STATE CONTROL COMPLEMENTARY OUTPUT FREQUENCY DELIVERY FORM M6307-25-W-S-E-C-155.520MHz-T M6307 BLANK = 100 PPM 50 = 50 PPM 25 = 25 PPM BLANK = 0/+70°C N = -10/+60°C M = -20/+70°C W = -40/+85°C BLANK = 40/60% S = 45/55% BLANK = NOT CONNECT E = TRI-STATE BLANK = PIN 5 NOT CONNECTED C = COMPLEMENTARY OUTPUT REQUIRED FREQUENCY T = TAPE AND REEL PETERMANN-TECHNIK | Amselweg 8 | D-86916 Kaufering Fon: 00 49 (0) 81 91 / 30 53 95 | Fax: 00 49 (0) 81 91 / 30 53 97 http://www.petermann-technik.de | [email protected] PETERMANN TECHNIK Time & Frequency Components OUTLINE DRAWING OF M6307 RECOMMENDED LAND PATTERN 7.0 +-0.2 5.08 #4 #1 #2 #3 2.54 2.0 Pin 3 1.4 PIN #1 #2 #3 #4 #5 #6 Pin 2 Pin 5 1.27 2.54 Pin 6 #5 1.8 1.8max Pin 1 #6 4.2 5.0 +-0.2 ** CONNECTION N.C. N.C. or TRI-STATE CTRL GROUND OUTPUT #1 N.C. or OUTPUT #2 VDD Pin 4 5.08 Unit:mm **A capacitor of value 0.01 µF or greater between VDD and Ground is recommended. TEST CIRCUIT FOR PECL A VDD #5 #6 VDD OUT2 OUT1 0,1µF OSCILLATOR GND #1 #2 #3 50 50 + - 2.0 V TRI-STATE CONTROL PECL OUTPUT WAVE FORM Logic 1 REFLOW SOLDER PROFILE 240°C VOH REFLOW 240°C max. 4°C/s max. 80% 10s max. COOLING Output Crossing 20% VOL TEMPERATURE POWER SUPPLY V #4 150°C 25°C 1 - 2 minutes TIME Symmetry PETERMANN-TECHNIK | Amselweg 8 | D-86916 Kaufering Fon: 00 49 (0) 81 91 / 30 53 95 | Fax: 00 49 (0) 81 91 / 30 53 97 http://www.petermann-technik.de | [email protected]