FEATURES PETERMANN TECHNIK - HIGH RELIABILITY FOR LOW COST Time & Frequency Components - COMPLEMENTARY OUTPUT AVAILABLE - WIDE FREQUENCY RANGE UP TO 700.0 MHz - EXCELLENT JITTER PERFORMANCE - CHEAPEST AVAILABLE SMD-VCXO IN METAL PACKAGE WITH PECL OUTPUT SIGNAL - EXTENDED TEMPERATURE RANGE TO -40/+85°C AVAILABLE - APPLICATIONS: FIBER CHANEL, GIGABIT ETHERNET, SDH/SONET, BROADBAND, TELECOM, ETC. SERIES PACKAGE FREQUENCY RANGE 5.0 VOLT 3.3 VOLT VS. TEMPERATURE VS. SUPPLY VOLTAGE VS. LOAD VS. AGING OPERATING TEMPERATURE RANGE STORAGE TEMPERATURE RANGE VOLTAGE INPUT CURRENT FREQUENCY STABILITY SYMMETRY STANDARD OPTION SIGNAL OUTPUT RISE AND FALL TIME "0" LEVEL "1" LEVEL LOAD START-UP TIME INPUT IMPEDANCE PERIOD JITTER RMS CONTROL VOLTAGE RANGE CENTER VOLTAGE PULLABILITY LINEARITY SLOPE PIN 1 PIN 2 PIN CONNECTION PIN 3 PIN 4 M7317 SMD-METAL PACKAGE 11.4 x 9.6 x 5.0 mm FUNDAMENTAL = 120.0 ~ 200.0 MHz PLL TECHNIQUE = 480.0 ~ 700.0 MHz +-50 ~ +-100 ppm max. +-5 ppm max. +-1 ppm max. +-5 ppm max. / first year -10/+60°C ~ -40/+85°C -55/+125°C +3.3 VDC +-5% 100 mA max. 40/60% 45/55% PECL 1.5 ns max. (20% TO 80% PECL) VDD-1.62 V max. VDD-1.02 V min. 50 Ω to VDD-2VDC 10 mS max. 50 kΩ min. 4 ps typ. @ 155.52 MHz 8 ps typ. @ 622.08 MHz 0 ~ 3.3 VDC 1.65 VDC +-50 ppm min. 10% max. POSITIVE CONTROL VOLTAGE GROUND OUTPUT SUPPLY VOLTAGE OTHER PARAMETERS ARE AVAILABLE ON REQUEST / CREATE HERE YOUR SPECIFICATION PETERMANN-TECHNIK | Amselweg 8 | D-86916 Kaufering Fon: 00 49 (0) 81 91 / 30 53 95 | Fax: 00 49 (0) 81 91 / 30 53 97 http://www.petermann-technik.de | [email protected] PETERMANN TECHNIK Time & Frequency Components PART NUMBERING GUIDE EXAMPLE M7317-50-W-S-VX3-50-622.08MHz-T SERIES M7317 BLANK = +- 100 ppm 50 = +-50 ppm X = OTHER VALUE - PLEASE INDICATE YOUR REQUIRED VALUE BLANK = 0/+70°C N = -10/+60°C M = -20/+70°C W = -40/+85°C X = OTHER VALUE - PLEASE INDICATE YOUR REQUIRED VALUE BLANK = 40/60% S = 45/55% VX3 = 0 ~ 3.3 V FOR 3.3 VOLT VERSION BLANK = +-100 ppm min. 50 = +-50 ppm min. IF YOU REQUIRE ANOTHER VALUE PLEASE INDICATE THE REQUIRED VALUE FREQUENCY IN MHz -T STABILITY VS. TEMPERATURE TEMPERATURE RANGE SYMMETRY CONTROL VOLTAGE PULLING RANGE FREQUENCY TAPE AND REEL PACKAGE OUTLINE DRAWING OF M7317 - 5.08 ** #5 #4 #1 #2 #3 2.0 - 4.2 #6 1.8 5.0max #1 MARK #2 #3 #6 #5 #4 - #1 0.8 1.2 2.54 **A capacitor of value 0.01µF or greater between VDD and Ground is recommended PIN #1 #2 #3 #4 #5 #6 CONNECTION CONTROL VOLTAGE N.C. or TRI-STATE CTRL GROUND OUTPUT 1 OUTPUT 2 VDD Unit:mm PETERMANN-TECHNIK | Amselweg 8 | D-86916 Kaufering Fon: 00 49 (0) 81 91 / 30 53 95 | Fax: 00 49 (0) 81 91 / 30 53 97 http://www.petermann-technik.de | [email protected] PETERMANN TECHNIK Time & Frequency Components TEST CIRCUIT FOR PECL TYPE M7317 A VDD #6 POWER SUPPLY V #4 #5 VDD OUT2 OUT1 0,1µF OSCILLATOR GND #1 #2 50 50 #3 2.0 V + - TRI-STATE INPUT CONTROL VOLTAGE OUTPUT WAVE FORM OF PECL Logic 1 VOH 80% Output Crossing 20% VOL Symmetry REFLOW SOLDER PROFILE 240°C REFLOW 240°C max. 4°C/s max. 10s max. TEMPERATURE COOLING 150°C 25°C 1 - 2 minutes TIME PETERMANN-TECHNIK | Amselweg 8 | D-86916 Kaufering Fon: 00 49 (0) 81 91 / 30 53 95 | Fax: 00 49 (0) 81 91 / 30 53 97 http://www.petermann-technik.de | [email protected]