FEATURES PETERMANN TECHNIK - HIGH RELIABILITY FOR LOW COST Time & Frequency Components - OPTIMISED FOR SDH/SONET APPLICATIONS - FREQUENCIES UP TO 200.0 MHz WITH FUNDAMENTAL CRYSTALS IN INVERTED MESA TECHNOLOGY - EXCELLENT JITTER PERFORMANCE - EXTENDED TEMPERATURE RANGE UP TO -40/+85°C AVAILABLE - APPLICATIONS: FIBER CHANEL, GIGABIT ETHERNET, SDH/SONET, BROADBAND, TELECOM, ETC. SERIES PACKAGE FREQUENCY RANGE VS. TEMPERATURE VS. SUPPLY VOLTAGE VS. LOAD VS. AGING OPERATING TEMPERATURE RANGE STORAGE TEMPERATURE RANGE VOLTAGE INPUT CURRENT SYMMETRY STANDARD OPTION SIGNAL OUTPUT RISE AND FALL TIME "0" LEVEL FOR PECL "1" LEVEL LOAD START-UP TIME INPUT IMPEDANCE PERIOD JITTER RMS CONTROL VOLTAGE RANGE STANDARD CENTER VOLTAGE PULLABILITY LINEARITY SLOPE PIN 1 PIN 7 PIN CONNECTION PIN 8 PIN 14 M7300 DIP 14 PACKAGE 120.0 ~ 200.0 MHz FUNDAMENTAL TECHNOLOGY +-50 ~ +-100 ppm +-5 ppm max. +-1 ppm max. +-5 ppm max. / first year -10/+60°C ~ -40/+85°C -55/+125°C +3.3 VDC +-5% 100 mA max. 40/60% 45/55% PECL 1.5 ns max. (20% TO 80% PECL) VDD-1.62 V max. VDD-1.02 V min. 50 Ω to VDD-2VDC 10 mS max. 50 kΩ min. 4 ps typ. @ 155.52MHz 0 ~ 3.3 VDC 1.65 VDC +-50 ppm min. 10% max. POSITIVE CONTROL VOLTAGE CASE GROUND OUTPUT SUPPLY VOLTAGE OTHER PARAMETERS ARE AVAILABLE ON REQUEST / CREATE HERE YOUR SPECIFICATION PETERMANN-TECHNIK | Amselweg 8 | D-86916 Kaufering Fon: 00 49 (0) 81 91 / 30 53 95 | Fax: 00 49 (0) 81 91 / 30 53 97 http://www.petermann-technik.de | [email protected] PETERMANN TECHNIK Time & Frequency Components PART NUMBERING GUIDE EXAMPLE M7300-50-W-S-V-50-155.52MHz SERIES STABILITY VS. TEMPERATURE TEMPERATURE RANGE SYMMETRY CONTROL VOLTAGE PULLING RANGE FREQUENCY SMD-GULLWING PACKAGE M7300 BLANK = +- 100 ppm 50 = +-50 ppm 25 = +-25 ppm 20 = +-20 ppm 15 = +-15 ppm X = OTHER VALUE - PLEASE INDICATE YOUR REQUIRED VALUE BLANK = 0/+70°C N = -10/+60°C M = -20/+70°C W = -40/+85°C X = OTHER VALUE - PLEASE INDICATE YOUR REQUIRED VALUE BLANK = 40/60% S = 45/55% V = 0 ~ 3.3 V BLANK = +-50 ppm min. IF YOU REQUIRE ANOTHER VALUE PLEASE INDICATE THE REQUIRED VALUE FREQUENCY IN MHz G 0.8 6.05max 7.6max OUTLINE DRAWING OF M7300 4-00.55max #14 15.24 #8 20.4max 13.1max #7(Grounded to the Case) 7.62 #1 PIN Connection #1 CONTROL V #7 GND #8 OUTPUT VDD #14 Unit:mm PETERMANN-TECHNIK | Amselweg 8 | D-86916 Kaufering Fon: 00 49 (0) 81 91 / 30 53 95 | Fax: 00 49 (0) 81 91 / 30 53 97 http://www.petermann-technik.de | [email protected] PETERMANN TECHNIK Time & Frequency Components OUTLINE DRAWING OF SMD-GULLWING PACKAGE 14.98+0.2 7.49+0.1 - #7 20.57max 15.24+0.1 - 7.62+0.1 - 7.6 max. 0.63+0.1 TYP(4 PLACES) 7.62+0.1 - 1.14 #8 1.35+0.1 #14 #1 14.98+0.2 - 12.95max Unit: mm TEST CIRCUIT FOR PECL TYPE M7300 A VDD #14 POWER SUPPLY V #8 VDD OUT 0,1µF OSCILLATOR GND #1 50 #7 + - 2.0 V CONTROL VOLTAGE OUTPUT WAVE FORM OF PECL Tr Tf Logic 1 VOH 80% 20% VOL Symmetry PETERMANN-TECHNIK | Amselweg 8 | D-86916 Kaufering Fon: 00 49 (0) 81 91 / 30 53 95 | Fax: 00 49 (0) 81 91 / 30 53 97 http://www.petermann-technik.de | [email protected]