FEATURES PETERMANN - HIGH RELIABILITY FOR LOW COST - FREQUENCY STABILITY TO +-15 PPM - AVAILABLE IN 5.0 AND 3.3 VOLT - VERY LOW PERIOD JITTER RMS 8 PS MAX. TECHNIK Time & Frequency Components - EXTENDED TEMPERATURE RANGE TO -40/+85°C SXO-1109 Metal package 11.4 x 9.6 x 5.0 mm³ 1.5 ~ 125.0 MHz 5.0 VOLT FREQUENCY RANGE 1.5 ~ 125.0 MHz 3.3 VOLT FREQUENCY STABILITY +-15 ~ +-100 PPM -10/+60°C ~ -40/+85°C OPERATING TEMPERATURE RANGE -55/+125°C STORAGE TEMPERATURE RANGE VOLTAGE +5.0 VDC +-10% +3.3 VDC +-10% 30 mA max. < 24.0 MHz 15 mA max. < 24.0 MHz INPUT 40 mA max. < 50.0 MHz 20 mA max. < 50.0 MHz CURRENT 60 mA max. < 80.0 MHz 30 mA max. < 80.0 MHz 80 mA max. < 125.0 MHz 40 mA max. < 125.0 MHz 40/60% STANDARD SYMMETRY 45/55% OPTION 10 ns max. RISE AND FALL TIME 0.4 V max. "0" LEVEL TTL 5 VOLT +2.4 V min. "1" LEVEL OUTPUT 0.4 V (10% VDD) max. "0" LEVEL HCMOS 5 VOLT +4.5 V (90%VDD) min. "1" LEVEL 0.1 V (10% VDD) max. "0" LEVEL HCMOS 3.3 VOLT +2.97 V (90%VDD) min. "1" LEVEL TTL 1 ~ 10 TTL LOAD HCMOS 15 ~ 50 pF STANDARD WITHOUT ENABLE/DISABLE FUNCTION PIN 1 OPTION WITH ENABLE/DISABLE FUNCTION PERIOD JITTER RMS 8 ps max. OTHER PARAMETERS ARE AVAILABLE ON REQUEST / CREATE HERE YOUR SPECIFICATION SERIES PACKAGE PART NUMBERING SYSTEM SXO3-1109-S-E-50-W-27.000MHz-T EXAMPLE SERIES SYMMETRY PIN 1 ENABLE/DISABLE FREQUENCY STABILITY TEMPERATURE RANGE FREQUENCY TAPE AND REEL SXO-1109 FOR 5 VOLT SXO3-1109 FOR 3.3 VOLT BLANK FOR 40/60% S FOR 45/55% BLANK FOR NO E/D E FOR E/D BLANK FOR 100 PPM ANY 15 ~ 50 PPM BLANK FOR 0/+70°C N = -10/+60°C M = -20/+70°C W = -40/+85°C FREQUENCY IN MHz -T PETERMANN-TECHNIK | Amselweg 8 | D-86916 Kaufering Fon: 00 49 (0) 81 91 / 30 53 95 | Fax: 00 49 (0) 81 91 / 30 53 97 http://www.petermann-technik.de | [email protected] PETERMANN TECHNIK Time & Frequency Components OUTLINE DRAWING OF SXO-1109 TEST CIRCUIT CMOS 5.08 ** + #3 8.35 - #4 2.0 5.0max #1 MARK #1 mA M #14 + + VM - POWER SUPPLY #2 TEST POINT - #8 VCC OUT OSCILLATOR 0,1µF GND #1 - CL=15pF #7 1.5 TRI-STATE-INPUT #2 #4 #3 PIN #1 #2 #3 #4 - #1 0.8 NOTE: CL includes probe and fixture capacitance CONNECTION N.C. or TRI-STATE CTRL CASE GROUND OUTPUT VDD TEST CIRCUIT TTL 1.0 Unit: mm + OUTPUT WAVE FORM CMOS mA M tr POWER SUPPLY tf #14 + + (CMOS LOAD) TEST POINT - VM - #8 VDD OUT OSCILLATOR 0,1µF GND #1 - RL=390 1N4148 or Equiv CL=15pF #7 VOH TRI-STATE-INPUT 90%VDD NOTE: CL includes probe and fixture capacitance 50%VDD 10%VDD REFLOW SOLDERING PROFILE VOL Th DUTY=Th/T T 240°C REFLOW 240°C max. 4°C/s max. 10s max. TEMPERATURE OUTPUT WAVE FORM TTL (TTL LOAD) tr COOLING 150°C 25°C tf 1 - 2 minutes VOH 2.4V 1.4V 0.4V VOL Th DUTY=Th/T T PETERMANN-TECHNIK | Amselweg 8 | D-86916 Kaufering Fon: 00 49 (0) 81 91 / 30 53 95 | Fax: 00 49 (0) 81 91 / 30 53 97 http://www.petermann-technik.de | [email protected] TIME