FEATURES PETERMANN - HIGH RELIABILITY FOR LOW COST - FREQUENCY STABILITY TO +-15 PPM - JITTER OPTIMIZED DIP 8 CLOCK OSCILLATOR - EXCELLENT CLOCK SIGNAL GENERATOR FOR DSP'S AND CPU'S TECHNIK Time & Frequency Components - EXTENDED TEMPERATURE RANGE TO -40/+85°C M2552 8 PIN DIP 125.0 ~ 160.0 MHz +-15 ~ +-100 ppm +-5 ppm after first year 0/+70°C ~ -40/+85°C -55/+125°C +5.0 VDC +-10% 80 mA max. 40/60% 45/55% 10 ns max. (10% VDD ~ 90% VDD) 10 ns max. (0.4V ~ 2.4V) 10% VDD max. 90% VDD min. 0.4 V max. 2.4 V min. 10 TTL 15 pF WITHOUT ENABLE/DISABLE FUNCTION WITH ENABLE/DISABLE FUNCTION PIN 8 OUTPUT PIN 1 INPUT TRISTATE LOGIC TABLE 2.0V MIN. OR NOT CONNECTED OSCILLATION 0.8V MAX. OR GND HIGH IMPEDANCE PIN CONNECTION SEE OUTLINE DRAWINGS START-UP TIME 10 ms max. 25 ps max. PERIOD JITTER RMS OTHER PARAMETERS ARE AVAILABLE ON REQUEST / CREATE HERE YOUR SPECIFICATION SERIES PACKAGE FREQUENCY RANGE FREQUENCY STABILITY AGING OPERATING TEMPERATURE RANGE STORAGE TEMPERATURE RANGE VOLTAGE INPUT CURRENT STANDARD SYMMETRY OPTION RISE AND FALL TIME HCMOS RISE AND FALL TIME TTL "0" LEVEL OUTPUT HCMOS 5.0 VOLT "1" LEVEL "0" LEVEL TTL 5.0 VOLT "1" LEVEL TTL LOAD HCMOS STANDARD PIN 1 OPTION PART NUMBERING SYSTEM EXAMPLE SERIES FREQUENCY STABILITY TEMPERATURE RANGE SYMMETRY PIN 1 ENABLE/DISABLE PIN CONFIGURATION FREQUENCY M2552-25-W-S-E-G-155.520MHz M2552 BLANK FOR 100 PPM ANY 50 ~ 15 PPM BLANK FOR 0/+70°C N = -10/+60°C M = -20/+70°C W = -40/+85°C BLANK FOR 40/60% S FOR 45/55% BLANK FOR NO E/D E FOR E/D BLANK FOR DIP G FOR GULL WING REQUIRED FREQUENCY PETERMANN-TECHNIK | Amselweg 8 | D-86916 Kaufering Fon: 00 49 (0) 81 91 / 30 53 95 | Fax: 00 49 (0) 81 91 / 30 53 97 http://www.petermann-technik.de | [email protected] PETERMANN TECHNIK Time & Frequency Components OUTLINE DRAWING OF M2552 GULL WING OUTLINE DRAWING OF M2552 6.8max 5.3max 1.14 7.62+0.1 - 7.62+0.1 - 12.7max 1.27+0.127 - #1 #4(Grounded to the Case) #1 #5 #4 5.5max 0.8 4-00.55max 14.98+0.2 - 12.7max 0.63+0.1 - #8 12.9max 7.62 Unit: mm PIN #1 #4 #5 #8 #8 #5 7.62 12.9max Connection NC/Tri-State GND Output VDD HCMOS OUTPUT WAVE FORM (HCMOS LOAD) tr Unit:mm tf VOH 90%VDD TEST CIRCUIT FOR HCMOS 50%VDD 10%VDD + mA M TEST POINT #14 + + VM - POWER SUPPLY Th DUTY=Th/T #8 T VCC OUT OSCILLATOR 0,1µF GND #1 - VOL CL =15pF #7 TTL OUTPUT WAVE FORM TRI-STATE-INPUT NOTE: CL includes probe and fixture capacitance (TTL LOAD) tr tf VOH TEST CIRCUIT FOR TTL 2.4V + + POWER SUPPLY - mA M TEST POINT #14 + VM - #8 VDD OUT OSCILLATOR 0,1µF GND #1 1.4V RL =390 0.4V CL=15pF 1N4148 or Equiv VOL Th #7 TRI-STATE-INPUT NOTE: CL includes probe and fixture capacitance PETERMANN-TECHNIK | Amselweg 8 | D-86916 Kaufering Fon: 00 49 (0) 81 91 / 30 53 95 | Fax: 00 49 (0) 81 91 / 30 53 97 http://www.petermann-technik.de | [email protected] DUTY=Th/T T