FEATURES - HIGH RELIABILITY FOR LOW COST - CHEAPEST AVAILABLE SMD-CLOCK-OSCILLATOR - FREQUENCY STABILITY TO +-15 PPM AVAILABLE - SUPPLY VOLTAGE OF 5.0, 3.3, 2.5 AND 1.8 VDC AVAILABLE - NEW STANDARD FOR SMALL LOW COST OSCILLATORS - EXTENDED WORKING TEMPERATURE RANGE TO -40/+105°C AVAILABLE SMD-LOW-COST CLOCK-OSCILLATOR SERIES PACKAGE 5.0 VOLT FREQUENCY RANGE 3.3 VOLT 1.8 VOLT FREQUENCY STABILITY AGING OPERATING TEMPERATURE RANGE STORAGE TEMPERATURE RANGE VOLTAGE +1.8 VDC +-5% 1.0 ~ 4.0 MHz = 10 mA max. 4.0 ~ 32.0 MHz = 20 mA max. CURRENT INPUT 32.0 ~ 80.0 MHz = 30 mA max. 80.0 ~ 100.0 MHz = 40 mA max. OUTPUT PIN 1 SXO-05032 Ceramic package 5.0 x 3.2 x 1.2 mm³ 1.0 ~ 125.0 MHz 1.0 ~ 125.0 MHz 1.0 ~ 100.0 MHz +-15 ~ +-100 PPM +-2 ppm max. per year -10/+60°C ~ -40/+105°C -55/+125°C +3.3 VDC +-10% +5.0 VDC +-10% 1.0 ~ 4.0 MHz = 10 mA max. 1.0 ~ 4.0 MHz = 10 mA max. 4.0 ~ 32.0 MHz = 20 mA max. 4.0 ~ 32.0 MHz = 30 mA max. 32.0 ~ 80.0 MHz = 30 mA max. 32.0 ~ 80.0 MHz = 45 mA max. 80.0 ~ 100.0 MHz = 40 mA max. 80.0 ~ 100.0 MHz = 80 mA max. Lower input currents are available on request. Please indicate the special value when required. STANDARD 40/60% SYMMETRY OPTION 45/55% RISE AND FALL TIME 5 ns typical / 10 ns max. "0" LEVEL 0.4 V max. TTL 5 VOLT "1" LEVEL +2.4 V min. "0" LEVEL 10% VDD max. CMOS 5 VOLT "1" LEVEL 90% VDD min. "0" LEVEL 0.4 V max. TTL 3.3 VOLT "1" LEVEL +1.4 V min. "0" LEVEL 10% VDD min. CMOS 3.3 VOLT "1" LEVEL 90% VDD max. "0" LEVEL 10% VDD min. CMOS 1.8 VOLT "1" LEVEL 90% VDD max. TTL 1 ~ 10 TTL LOAD CMOS 15 ~ 50 pF (1.8 VDC = 15 pF max.) STANDARD WITHOUT ENABLE/DISABLE FUNCTION OPTION WITH ENABLE/DISABLE FUNCTION OTHER PARAMETERS ARE AVAILABLE ON REQUEST / CREATE HERE YOUR SPECIFICATION REV.02 / March 2008 http://www.petermann-technik.com | [email protected] PART NUMBERING SYSTEM EXAMPLE SERIES SYMMETRY PIN 1 ENABLE/DISABLE FREQUENCY STABILITY TEMPERATURE RANGE FREQUENCY TAPE AND REEL SXO3-05032-S-E-50-W-27.000MHz-T SXO-05032 FOR 5 VOLT SXO3-05032 FOR 3.3 VOLT SXO18-05032 FOR 1.8 VOLT BLANK FOR 40/60% S FOR 45/55% BLANK FOR NO E/D E FOR E/D BLANK FOR 100 PPM ANY 15 ~ 50 PPM BLANK FOR 0/+70°C N = -10/+60°C M = -20/+70°C W = -40/+85°C Y = -40/+105°C FREQUENCY IN MHz -T OUTLINE DRAWING OF SXO-05032 1.2+0.1 - 5.0+0.2 - #2 1.2+0.1 - 0.8 #4 FUNCTION #1 Not Connected or Enable / Disable #2 GND #3 Output #4 Vcc #3 1.4 2.4 1.2+-0.2 0.25+0.1 0.36+0.1 - 2.54 PIN 1.2 3.2+0.2 - #1 2.54 Cby=0.01µF http://www.petermann-technik.com | [email protected] Unit:mm INPUT CURRENT TEST CIRCUIT CMOS + #14 + + VM - POWER SUPPLY VDD TEST POINT mA M #8 A VCC OUT OSCILLATOR 0,1µF GND #1 - CL=15pF 3 4 #7 TRI-STATE-INPUT VDD OUT OE GND 0.01~0.1µF NOTE: CL includes probe and fixture capacitance 2 1 TEST CIRCUIT TTL GND + TEST POINT mA M #14 + + VM - POWER SUPPLY RL=390 #8 VDD OUT OSCILLATOR 0,1µF GND #1 - CL=15pF 1N4148 or Equiv REFLOW SOLDER PROFILE #7 TRI-STATE-INPUT NOTE: CL includes probe and fixture capacitance REF LOW 260°C 1 to 5°C/s 1TO5°C /s (CMOS LOAD) tr tf VOH 90%VDD TEMPERAT URE OUTPUT WAVE FORM CMOS COOLING PREHEAT IN G 10s max 150°C 1 to 9°C/s 25°C 60 200 50%VDD TIME (Seconds) 10%VDD Oscillators can be soldered according to the norm JEDEC J-STD-020C. VOL Th DUTY=Th/T T TAPE AND REEL DIMENSIONS 1. 75+0.1 - 4.0+0.1 1.5 PULL DI RECTION +0 -1 tr 12.0+0.2 - 5. 4+0.1 - (TTL LOAD) tf 0.3+0.1 - 2. 0+0.1 - 5.5+0.1 - OUTPUT WAVE FORM TTL 1. 5 VOH 3. 5+0.1 - 2.4V 1.4+0.1 - +0.1 -1 8.0+0.1 - 2.0+0.5 21.0+0.8 - 13.0+0.2 - 60+5 - 180 +0 -3 1.4V 0.4V VOL Th DUTY=Th/T 13.0+0.3 16.5 T http://www.petermann-technik.com | [email protected] +0 -1 Unit: mm