FEATURES - HIGH RELIABILITY FOR LOW COST - FREQUENCY STABILITY TO +-15 PPM AVAILABLE - AVAILABLE IN 1.8 / 2.5 AND 3.3 VOLT - NEW STANDARD FOR SMALL HIGH PERFORMANCE LOW COST OSCILLATORS - EXTENDED TEMPERATURE RANGE TO -40/+85°C AVAILABLE SXO-03025 Ceramic package 3.2 x 2.5 x 1.0 mm 1.0 ~ 125.0 MHz +-15 ~ +-100 ppm -10/+60°C ~ -40/+85°C -55/+125°C +2.5 VDC +-5% +3.3 VDC +-5% 1.0 ~ 4.0 MHz = 10 mA max. 1.0 ~ 4.0 MHz = 10 mA max. 1.0 ~ 4.0 MHz = 10 mA max. INPUT 4.0 ~ 32.0 MHz = 30 mA max. 4.0 ~ 32.0 MHz = 30 mA max. 4.0 ~ 32.0 MHz = 20 mA max. CURRENT 32.0 ~ 80.0 MHz = 45 mA max. 32.0 ~ 80.0 MHz = 45 mA max. 32.0 ~ 80.0 MHz = 30 mA max. 80.0 ~ 125.0 MHz = 80 mA max. 80.0 ~ 125.0 MHz = 80 mA max. 80.0 ~ 125.0 MHz = 40 mA max. STANDARD 40/60% SYMMETRY OPTION 45/55% RISE AND FALL TIME 5 ns typical / 7 ns max. OUTPUT "0" LEVEL 10% VDD max. CMOS "1" LEVEL 90% VDD min. LOAD CMOS 15 pF STANDARD WITHOUT ENABLE/DISABLE FUNCTION PIN 1 OPTION WITH ENABLE/DISABLE FUNCTION OTHER PARAMETERS ARE AVAILABLE ON REQUEST / CREATE HERE YOUR SPECIFICATION SMD-OSCILLATOR SERIES PACKAGE FREQUENCY RANGE FREQUENCY STABILITY OPERATING TEMPERATURE RANGE STORAGE TEMPERATURE RANGE VOLTAGE 1.8 VDC +-5% PART NUMBERING SYSTEM EXAMPLE SERIES SYMMETRY PIN 1 ENABLE/DISABLE FREQUENCY STABILITY TEMPERATURE RANGE FREQUENCY TAPE AND REEL SXO18-03025-S-E-50-W-27.000MHz-T SXO18-03025 FOR 1.8 VOLT VERSION SXO25-03025 FOR 2.5 VOLT VERSION SXO3-03025 FOR 3.3 VOLT VERSION BLANK FOR 40/60% S FOR 45/55% BLANK FOR NO E/D E FOR E/D BLANK FOR 100 ppm ANY 15 ~ 50 ppm BLANK FOR 0/+70°C N = -10/+60°C M = -20/+70°C W = -40/+85°C FREQUENCY IN MHz -T REV.02 / April 2009 http://www.petermann-technik.com | [email protected] OUTLINE DRAWING OF SXO-03025 1.0 #1 #2 1.0 0.75 3.2+0.2 - 2.5+0.2 - #3 #4 #2 #3 1.65 1.0 -max. FUNCTION #1 Enable / Disable #2 GND #3 Output #4 Vcc 1.2 1.4 2.2 (*) Cby=0.01µF Unit:mm TAPE AND REEL DIMENSIONS 4.0+0.1 - 3.5+0.1 1.75+0.1 - PULL DIRECTION 0.25+0.1 - 1.5+0.1 - 8.0+0.2 - 2.0+0.1 - 3.5+0.1 - 2.8+0.1 - 1.0+0.1 - 1.15+0.1 - 4.0+0.1 - 2.0+0.5 21.0+0.8 - 13.0+0.2 - 60+5 - 180+3 - #1 PIN 9.0+0.3 - Unit: mm 12.4+0.1 - TEST CIRCUIT CMOS + + POWER SUPPLY - TEST POINT mA M #14 + VM - #8 VCC OUT OSCILLATOR 0,1µF GND #1 CL=15pF #7 TRI-STATE-INPUT NOTE: CL includes probe and fixture capacitance http://www.petermann-technik.com | [email protected] OUTPUT WAVE FORM CMOS (CMOS LOAD) tr tf VOH 90%VDD 50%VDD 10%VDD VOL Th DUTY=Th/T T REFLOW SOLDER PROFILE TEMPERAT URE 260°C REF LOW 1 to 5°C/s 1TO5°C /s COOLING PREHEAT IN G 10s max 150°C 1 to 9°C/s 25°C 60 200 TIME (Seconds) Oscillators can be soldered according to the norm JEDEC J-STD-020C. http://www.petermann-technik.com | [email protected]