FEATURES PETERMANN - HIGH RELIABILITY FOR LOW COST - FREQUENCY STABILITY TO +-15 PPM - JITTER OPTIMIZED DIP 8 CLOCK OSCILLATOR - EXCELLENT CLOCK SIGNAL GENERATOR FOR DSP'S AND CPU'S TECHNIK Time & Frequency Components - EXTENDED TEMPERATURE RANGE TO -40/+85°C M2352 8 PIN DIP 125.0 ~ 180.0 MHz +-15 ~ +-100 ppm +-5 ppm after first year 0/+70°C ~ -40/+85°C -55/+125°C +3.3 VDC +-10% 40 mA max. 40/60% 45/55% 10 ns max. (10% VDD ~ 90% VDD) 10% VDD max. 90% VDD min. 15 pF WITHOUT ENABLE/DISABLE FUNCTION WITH ENABLE/DISABLE FUNCTION PIN 8 OUTPUT PIN 1 INPUT TRISTATE LOGIC TABLE 2.0V MIN. OR NOT CONNECTED OSCILLATION 0.8V MAX. OR GND HIGH IMPEDANCE SEE OUTLINE DRAWINGS PIN CONNECTION 10 ms max. START-UP TIME 25 ps max. PERIOD JITTER RMS OTHER PARAMETERS ARE AVAILABLE ON REQUEST / CREATE HERE YOUR SPECIFICATION SERIES PACKAGE FREQUENCY RANGE FREQUENCY STABILITY AGING OPERATING TEMPERATURE RANGE STORAGE TEMPERATURE RANGE VOLTAGE INPUT CURRENT STANDARD SYMMETRY OPTION RISE AND FALL TIME HCMOS OUTPUT "0" LEVEL HCMOS 3.3 VOLT "1" LEVEL LOAD HCMOS STANDARD PIN 1 OPTION PART NUMBERING SYSTEM EXAMPLE SERIES FREQUENCY STABILITY TEMPERATURE RANGE SYMMETRY PIN 1 ENABLE/DISABLE PIN CONFIGURATION FREQUENCY M2352-25-W-S-E-G-180.0MHz M2352 BLANK FOR 100 PPM ANY 50 ~ 15 PPM BLANK FOR 0/+70°C N = -10/+60°C M = -20/+70°C W = -40/+85°C BLANK FOR 40/60% S FOR 45/55% BLANK FOR NO E/D E FOR E/D BLANK FOR DIP G FOR GULL WING REQUIRED FREQUENCY PETERMANN-TECHNIK | Amselweg 8 | D-86916 Kaufering Fon: 00 49 (0) 81 91 / 30 53 95 | Fax: 00 49 (0) 81 91 / 30 53 97 http://www.petermann-technik.de | [email protected] PETERMANN TECHNIK Time & Frequency Components OUTLINE DRAWING OF M2352 GULL WING OUTLINE DRAWING OF M2352 6.8max 5.3max 1.14 7.62+0.1 - 7.62+0.1 - 12.7max 1.27+0.127 - #1 #4(Grounded to the Case) #1 #5 #4 5.5max 0.8 4-00.55max 14.98+0.2 - 12.7max 0.63+0.1 - #8 12.9max 7.62 Unit: mm PIN #1 #4 #5 #8 #8 #5 7.62 12.9max Connection NC/Tri-State GND Output VDD Unit:mm HCMOS OUTPUT WAVE FORM TEST CIRCUIT FOR HCMOS + + POWER SUPPLY - mA M (HCMOS LOAD) TEST POINT #14 + VM - tr VCC OUT OSCILLATOR 0,1µF GND #1 tf #8 VOH 90%VDD CL =15pF 50%VDD #7 TRI-STATE-INPUT 10%VDD NOTE: CL includes probe and fixture capacitance VOL Th DUTY=Th/T T PETERMANN-TECHNIK | Amselweg 8 | D-86916 Kaufering Fon: 00 49 (0) 81 91 / 30 53 95 | Fax: 00 49 (0) 81 91 / 30 53 97 http://www.petermann-technik.de | [email protected]