Model 73040 Accessory Kit for Modular & Microline Passive Oscilloscope Probes Model 73040, Accessory Kit for Modular & Microline Passive Oscilloscope Probes Features • • Accessory set for 5mm (0.197”) Modular and Microline Passive Oscilloscope Probes. Kit contains the following (one of each): • Model 73040, Oscilloscope Probe Accessory Kit Ordering Information Model: 73040 Oscilloscope Probe Accessory Kit USA: Sales: 800-490-2361 Technical Support: [email protected] Fax: 425-446-5844 Europe: 31-(0) 40 2675 150 International: 425-446-5500 Where to Buy: www.pomonaelectronics.com BNC Adapter Solid Tip 0.8mm (0.0315”) Insulating Cap Ground Lead with Alligator Clip 22 cm (8.66”) Trimmer Tool Spring Tip 0.8mm (0.0315”) Sprung Hook Replacement accessory for the following Oscilloscope Probe models: 6491, 30 MHz X1 Oscilloscope Probe 6493, 150 MHz X10 Oscilloscope Probe 6494, 150 MHz X10 Scope Probe RO 6495, 250 MHz X10 Oscilloscope Probe 6496, 300 MHz X10 Oscilloscope Probe 6497, 300 MHz X10 Scope Probe RO 6499, 20/150 MHz X1/X10 Scope Probe 6500, 30/250 MHz X1/X10 Scope Probe 6551, 500 MHz O-Scope Probe w/RA 6554, 500 MHz O-Scope Probe All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Copyright © 2008 D2015572 Rev. 003 Page 1 of 1