05027 PHP8.4 - PIP500 Only One Name Means ProTek’Tion™ ac power bus voltage suppressor Description The PHP and PIP Series of devices are designed in accordance with DOD-STD-1399, section 300 interface standard and MIL-STD704A for shipboard systems, electrical power and alternating current. When large voltage transients endanger voltage sensitive components, this series provides reliable protection against power interruptions and shore power switch-over. This series can be screened upon request for military requirements in accordance with MIL-PRF-19500 (applicable tests). PHP & PIP package Features applications • DOD-STD-1399, MIL-STD-704, MIL-STD-2036 & MIL-PRF-19500/507 Compliant • 7,500 & 15,000 kilowatts Peak Pulse Power per Line (tp = 10/1000µs) • Each Device 100% Tested • Available in Multiple Voltages • Secondary AC Power Supply • Aircraft & Shipboard AC Power Bus • Heavy Duty AC Switching Power Mechanical characteristics • PHP: Hermetically Sealed Glass to Metal Sub-Assemblies • PIP: Molded Epoxy Case Sub-Assemblies • Approximate Weight: 46 grams • Flammability Rating UL 94V-0 • Screening Available Upon Request: H1 - Submodule Screening (Test Plans 05231 & 05232) H2 - Submodule & Module Screening (Test Plan 05233) H3 - Submodule & Module Screening with Group B & C Lot Testing (Test Plans 05234 & 05235) 05027.R7 1/11 Page 1 www.protekdevices.com 05027 PHP8.4 - PIP500 Only One Name Means ProTek’Tion™ typical device characteristics MAXIMUM RATINGS @ 25°C Unless Otherwise Specified PARAMETER SYMBOL VALUE UNITS PPP 7.5 & 15 kilowatts Peak Pulse Power (tp = 10/1000µs) - See Figure 1 Operating Temperature Storage Temperature Steady State Power Dissipation @ 50°C TL -55 to 150 °C TSTG -55 to 150 °C TA 7.5 Watts ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified minimum breakdown voltage (Note 1) MAXIMUM CLAMPING VOLTAGE (Fig. 2) MAXIMUM LEAKAGE CURRENT MAXIMUM peak pulse current MAXIMUM peak pulse power VWM VOLTS @1mA V(BR) VOLTS @ IPPM VC volts @V WM ID µA I PPM amps @ 1ms P PP kilowatts 8.4 12.0 14 22 250 341 7.5 8.4 12.0 14 22 250 341 7.5 PHP24 24.0 34.0 40 67 250 112 7.5 PIP24 24.0 34.0 40 67 250 112 7.5 PHP30 30.0 42.5 50 84 250 90 7.5 PIP30 30.0 42.5 50 84 250 90 7.5 PHP60 60.0 85.0 100 167 250 90 15 PIP60 60.0 85.0 100 167 250 90 15 AVERAGE RMS VOLTAGE RATED STAND-OFF VOLTAGE VRMS VOLTS PHP8.4 PIP8.4 PART NUMBER PHP120* 120.0 170.0 200 319 250 47 15 PIP120* 120.0 170.0 200 319 250 47 15 PHP208 208.0 295.0 347 536 250 28 15 PIP208 208.0 295.0 347 536 250 28 15 PHP250* 250.0 354.0 418 652 250 23 15 PIP250* 250.0 354.0 418 652 250 23 15 PHP440 440.0 623.0 735 1138 250 13.2 15 PIP440 440.0 623.0 735 1138 250 13.2 15 PHP500* 500.0 708.0 835 1292 250 11.6 15 PIP500* 500.0 708.0 835 1292 250 11.6 15 NOTE 1. A * indicates that this series is recommended for marine applications. For military and aerospace applications, use the PHP Series, for industrial applications, use the PIP Series. 2. The following voltages have a peak pulse power rating of 7,500 Watts for an 10/1000µs waveshape (see Figure 1): 8.4V, 24V and 30V. 05027.R7 1/11 Page 2 www.protekdevices.com 05027 PHP8.4 - PIP500 Only One Name Means ProTek’Tion™ typical device characteristics figure 1 peak pulse power vs pulse time PPP - Peak Pulse Power - kilowatts 1,000 100 15kW, 10/1000µs Waveform 10 7.5kW, 10/1000µs Waveform 1 0.1 1 10 100 td - Pulse Duration - µs 1,000 10,000 figure 3 POWER DERATING CURVE figure 2 PULSE WAVEFORM 100 tf TEST WAVEFORM PARAMETERS tf = 10µs td = 1000µs 100 Peak Value IPP Peak Pulse Power 10/1000µs 80 % Of Rated Power IPP - Peak Pulse Current - % of IPP 100,000 td = t/(IPP/2) 50 60 40 20 e 0 0 -t 1 2 0 3 25 50 75 100 125 150 TL - Lead Temperature - °C t - Time - ms 05027.R7 1/11 0 Page 3 www.protekdevices.com 05027 PHP8.4 - PIP500 Only One Name Means ProTek’Tion™ package information outline dimensions millimeters dim inches min max min max A 56.38 57.91 2.22 2.28 B 49.02 50.03 1.93 1.87 C 3.43 4.17 0.135 0.165 D 20.32 E 0.800 8.26 F 9.27 0.325 3.18 DIA. 0.365 0.125 DIA. G 16.76 18.29 0.660 0.720 H 34.16 35.69 1.345 1.405 I 6.35 J 11.94 0.250 13.46 0.47 0.53 Notes 1. Dimensions “D”, “F” and “I” are nominal. A B C D H G E F J I ORDERING INFORMATION base PART NUMBER (xx = Voltage) SUBMODULE SCREENING SUBMODULE & mODULE SCREENING SUBMODULE & MODULE screening, GROUP B & c LOT TESTING PHPxxx H1 H2 H3 PIPxxx H1 H2 H2 Notes 1. Marking on Part - logo , date code and part number. Package outline per document number 06033.R1 9/09 05027.R7 1/11 Page 4 www.protekdevices.com 05027 PHP8.4 - PIP500 Only One Name Means ProTek’Tion™ company information COMPANY PROFILE ProTek Devices, based in Tempe, Arizona USA, is a manufacturer of Transient Voltage Suppression (TVS) products designed specifically for the protection of electronic systems from the effects of lightning, Electrostatic Discharge (ESD), Nuclear Electromagnetic Pulse (NEMP), inductive switching and EMI/RFI. With over 25 years of engineering and manufacturing experience, ProTek designs TVS devices that provide application specific protection solutions for all electronic equipment/systems. ProTek Devices Analog Products Division, also manufactures analog interface, control, RF and power management products. CONTACT US Corporate Headquarters 2929 South Fair Lane Tempe, Arizona 85282 USA By Telephone General: 602-431-8101 Sales: 602-414-5109 Customer Service: 602-414-5114 By Fax General: 602-431-2288 By E-mail: Sales: [email protected] Customer Service: [email protected] Technical Support: [email protected] Web www.protekdevices.com www.protekanalog.com COPYRIGHT © ProTek Devices 1998 - This literature is subject to all applicable copyright laws and is not for resale in any manner. SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice. DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special, consequential or incidental damages. LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory. 05027.R7 1/11 Page 5 www.protekdevices.com