05173 PLC03-3.3 Only One Name Means ProTek’Tion™ LOW CAPACITANCE TVS ARRAY APPLICATIONS ✔ T1/E1 Line Cards ✔ ISDN U-Interfaces & ISDN S/T Interfaces ✔ xDSL Interfaces ✔ Ethernet - 10/100/1000 Base T ✔ Set-Top Box IEC COMPATIBILITY (EN61000-4) ✔ 61000-4-2 (ESD): Air - 15kV, Contact - 8kV ✔ 61000-4-4 (EFT): 40A - 5/50ns ✔ 61000-4-5 (Surge): 8/20µs - 94A, L4(Line-Gnd), 48A, L1(Power) & 48A, L4(Line-Line) SO-8 FEATURES ✔ 100A (2/10µs) per Bellcore GR1089(Intra-Building) ✔ ESD Protection > 40 kilovolts ✔ 1800 Watts Peak Pulse Power per Line (tp = 8/20µs) ✔ LOW CAPACITANCE: 8pF Typical ✔ Telecom/Diode Bridge ✔ RoHS Compliant on Lead Free Versions MECHANICAL CHARACTERISTICS ✔ Molded JEDEC SO-8 ✔ Available in Tin-Lead or Lead-Free Pure-Tin Plating(Annealed) ✔ Solder Reflow Temperature: Tin-Lead - Sn/Pb, 85/15: 240-245°C Pure-Tin - Sn, 100: 260-270°C ✔ Weight 70mg(Approximate) ✔ Flammability Rating UL 94V-0 ✔ 12mm Tape and Reel Per EIA Standard 481 ✔ Marking: Marking Code, Logo, Date Code & Pin One Defined By Dot on Top of Package PIN CONFIGURATION 05173.R5 4/05 8 7 6 5 1 2 3 4 1 www.protekdevices.com PLC03-3.3 DEVICE CHARACTERISTICS MAXIMUM RATINGS @ 25°C Unless Otherwise Specified SYMBOL VALUE UNITS Peak Pulse Power (tp = 8/20µs) - See Figure 1 PPP 1800 Watts Operating Temperature TJ -55°C to 150°C °C TSTG -55°C to 150°C °C PARAMETER Storage Temperature ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified PART NUMBER PLC03-3.3 DEVICE MARKING CODE PBC RATED STAND-OFF VOLTAGE MINIMUM SNAP-BACK VOLTAGE VWM VOLTS @ 50mA V(BR) VOLTS @8/20µs VC @ IPP @VWM ID µA @0V, 1 MHz C pF @0V, 1 MHz C pF 3.0 2.8 18.0V @ 100.0A 2.0 25 12 MAXIMUM CLAMPING VOLTAGE (Note 1 & 2) (See Fig. 2) MAXIMUM LEAKAGE CURRENT MAXIMUM MAXIMUM CAPACITANCE CAPACITANCE (See Note 3) (See Note 4) MAXIMUM CLAMPING VOLTAGE Line-Ground 8/20µs @IP = 50A VC VOLTS 11 Note Note Note Note 1: 2: 3: 4: For an 8/20µs waveform, apply positive pulse to pin 1 or 8 to pin 2 or 3(ground). Measured between pin 1 or 8 to pin 2 or 3. Measured between I/O pins and ground (pin 1 to 2). Measured between I/O pins (pins 1 to 4). 05173.R5 4/05 2 www.protekdevices.com PLC03-3.3 GRAPHS FIGURE 1 PEAK PULSE POWER VS PULSE TIME PPP - Peak Pulse Current - kilowatts 100 10 1800W, 8/20µs Waveform 1 0.1 0.01 1 10 100 td - Pulse Duration - µs 10,000 FIGURE 2 PULSE WAVE FORM 120 IPP - Peak Pulse Current - % of IPP 1,000 tf 100 TEST WAVEFORM PARAMETERS tf = 8µs td = 20µs Peak Value IPP 80 e-t 60 40 td = t I /2 PP 20 0 0 5 10 15 t - Time - µs 25 30 FIGURE 3 POWER DERATING CURVE 100 Peak Pulse Power 8/20µs 80 % Of Rated Power 20 60 40 20 Average Power 0 0 05173.R5 4/05 25 50 75 100 125 TL - Lead Temperature - °C 3 150 www.protekdevices.com PLC03-3.3 PACKAGE OUTLINE & DIMENSIONS PACKAGE OUTLINE SO-8 -A- 8 5 + 0.010 (0.25 MM) M B M 4 PL -B - P 1 G PACKAGE DIMENSIONS 4 DIM A B C D F G J K P R D C R x 45° 0° - 10° -T- K 0.010 (0.25 MM) M T B S A S 8 PL + J F MILLIMETERS MIN MAX 4.80 3.80 1.35 0.35 0.40 1.27 BSC 0.18 0.10 5.80 0.25 INCHES MIN MAX 5.00 0.189 0.196 4.00 0.150 0.157 0.054 0.068 1.75 0.49 0.014 0.019 0.049 1.250 0.016 1.27 BSC 0.05 BSC 0.05 BSC 0.25 0.007 0.009 0.004 0.008 0.25 6.20 0.229 0.244 0.019 0.50 0.010 NOTES 1. 2. 3. 4. 5. 6. MOUNTING PAD 0.050 ± 0.005 0.030 ± 0.005 - T - = Seating Plane and Datum Surface. Dimensions “A” and “B” are Datum. Dimensions “A” and “B” do not include mold protrusion. Maximum mold protrusion is 0.015” (0.380 mm) per side. Dimensioning and tolerances per ANSI Y14.5M, 1982. Dimensions are exclusive of mold flash and metal burrs. TAPE & REEL/BULK ORDERING NOMENCLATURE 0.160 ± 0.005 1. Surface mount product is taped and reeled in accordance with EIA-481. 2. Suffix-T7 = 7 Inch Reel - 1,000 pieces per 12mm tape, i.e., PLC03-3.3-T7. 3. Suffix-T13 = 13 Inch Reel - 2,500 pieces per 12mm tape, i.e., PLC03-3.3-T13. 4. Suffix-LF = Lead-Free, Pure Tin Plating, i.e., PLC03-3.3-LF-T13. 5. No Suffix = Product Shipped in Tubes of 98 pcs per Tube. 0.245 MIN 0.045 ± 0.005 Outline & Dimensions: Rev 1 - 11/01, 06009 COPYRIGHT © ProTek Devices 2005 SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such products. 05173.R5 4/05 4 ProTek Devices 2929 South Fair Lane, Tempe, AZ 85282 Tel: 602-431-8101 Fax: 602-431-2288 E-Mail: [email protected] Web Site: www.protekdevices.com www.protekdevices.com