05293 SM15KPA17A - SM15KPA220CA Only One Name Means ProTek’Tion™ 15kW surface mount power tvs component Description The SM15KPA Series are high-powered surface mount transient voltage suppression components designed to protect equipment and systems from the damaging effects of high voltage spikes. The surface mount package configuration provides a lower profile at a reduce cost compared to legacy axial lead package configurations. These devices provide 15,000 Watts of peak pulse power dissipation for an 10/1000µs waveform. Applications include AC and DC power line protection, terrestrial base station protection as well as module lightning protection. SMD-15 package Features applications • Compatible with IEC 61000-4-5 (Surge): 48A, 8/20µs - L3(LineGround), L4(Line-Line) & L1 (Power) • 15,000 Watts Peak Pulse Power per Line (tp = 10/1000µs) • Unidirectional and Bidirectional Configurations • Easy Mounting to Printed Circuit Board • Available in Multiple Voltages • tClamping (0V to V(BR)Min) < 100ps, Theoretical for Unidirectional and 5ns for Bidirectional • RoHS Complaint (Exemption #7) • Relay Drives • Motor (Start/Stop) Back EMF Protection • Module Lightning Protection • Secondary Lightning Protection for AC/DC mechanical characteristics • Black Molded Case • Approximate Weight: 2.5 grams • Lead-Free Silver Plating • Solder Reflow Temperature: 240-250°C • Flammability Rating UL 94V-0 • Marking: Logo, Marking Code and Date Code circuit diagramS Unidirectional 05293.R2 3/12 Bidirectional Page 1 www.protekdevices.com 05293 SM15KPA17A - SM15KPA220CA Only One Name Means ProTek’Tion™ typical device characteristics MAXIMUM RATINGS @ 25°C Unless Otherwise Specified PARAMETER Peak Pulse Power (tp = 10/1000µs) - See Figure 1 SYMBOL VALUE UNITS PPP 15,000 Watts Forward Surge Rating IF 200 Amps Steady State Power Dissipation PP 1.0 Watts Storage Temperature TSTG -55 to 150 °C TL -55 to 150 °C Operating Temperature ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified unidirectional PART NUMBER (Notes 1 - 2) marking code RATED STAND-OFF VOLTAGE VWM VOLTS MINIMUM BREAKDOWN VOLTAGE MAXIMUM LEAKAGE CURRENT MIN V(BR) VOLTS @I T mA @VWM ID µA MAXIMUM CLAMPING VOLTAGE (Fig. 2) temperature coefficient of v(br) @ 10/1000µs VC @ I PP qV(BR) mV/°C SM15KPA17A 17A 17.0 18.9 50 5000 29.3V @ 512.0A 17 SM15KPA30A 30A 30.0 33.3 5 15 50.7V @ 296.0A 34 SM15KPA33A 33A 33.0 36.7 5 10 54.8V @ 274.0A 38 SM15KPA48A 48A 48.0 53.3 5 10 77.7V @ 193.0A 56 NOTES 1. Devices shown are preferred voltages. Consult factory for additional voltages. 2. VF(MAX) = 15 Volts @ 200A, 8.3ms (1/2 Sine Wave) - unidirectional configuration only. ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified bidirectional PART NUMBER (Note 1) SM15KPA30CA marking code 30C RATED STAND-OFF VOLTAGE MINIMUM BREAKDOWN VOLTAGE MAXIMUM LEAKAGE CURRENT MAXIMUM CLAMPING VOLTAGE (Fig. 2) temperature coefficient of v(br) VWM VOLTS MIN V(BR) VOLTS @I T mA @VWM ID µA @ 10/1000µs VC @ I PP qV(BR) mV/°C 30.0 33.3 5 15 50.7V @ 296.0A 34 SM15KPA43CA 43C 43.0 47.8 5 10 69.7V @ 215.0A 50 SM15KPA54CA 54C 54.0 60.0 5 10 87.5V @ 171.0A 63 SM15KPA58CA 58C 58.0 64.4 5 10 94.0V @ 160.0A 68 SM15KPA78CA 78C 78.0 86.7 5 10 126.0V @ 119.0A 93 SM15KPA220CA 220C 220.0 245.0 5 10 356.0V @ 42.0A 269 NOTES 1. Devices shown are preferred voltages. Consult factory for additional voltages. 05293.R2 3/12 Page 2 www.protekdevices.com 05293 SM15KPA17A - SM15KPA220CA Only One Name Means ProTek’Tion™ typical device characteristics figure 1 peak pulse power vs pulse time PPP - Peak Pulse Power - kilowatts 1,000 100 15kW, 10/1000µs Waveform 10 1 0.1 1 10 100 td - Pulse Duration - µs 1,000 10,000 figure 3 POWER DERATING CURVE figure 2 PULSE WAVEFORM 100 tf TEST WAVEFORM PARAMETERS tf = 10µs td = 1000µs 100 Peak Value IPP Peak Pulse Power 10/1000µs 80 % Of Rated Power IPP - Peak Pulse Current - % of IPP 100,000 td = t/(IPP/2) 50 60 40 20 e 0 0 -t 1 2 0 3 25 50 75 100 125 150 TL - Lead Temperature - °C t - Time - ms 05293.R2 3/12 0 Page 3 www.protekdevices.com 05293 SM15KPA17A - SM15KPA220CA Only One Name Means ProTek’Tion™ smd-15 package information PACKAGE outline dimensions dim millimeters Bottom View B inches min max min max A 13.46 14.22 0.530 0.560 B 9.52 9.78 0.375 0.385 C 5.08 5.18 0.200 0.204 D 8.15 8.25 0.321 0.325 E 2.55 2.65 0.100 0.104 F 6.65 6.75 0.262 0.266 G 2.65 3.15 0.104 0.124 H 3.15 3.25 0.124 0.128 J 2.25 2.54 0.090 0.100 K 3.15 3.25 0.124 0.128 L 1.25 1.35 0.049 0.053 M 2.51 2.61 0.099 0.103 N 0.70 0.80 0.028 0.031 P 0.70 0.80 0.028 0.031 Q 0.80 1.03 0.031 0.041 R 0.80 1.03 0.031 0.041 T 8.12 9.14 0.320 0.360 W 0.25 0.50 0.010 0.020 V 5.08 5.18 0.200 0.204 K G R H J L A E V M F C D Q P N Side View T W Suggested Solder Pad Q R P T N Package outline, pad layout and tape specifications per document number 06090.R1 3/12 05293.R2 3/12 ML K J C D H E F www.protekdevices.com Page 4 G 05293 T SM15KPA17A - SM15KPA220CA Only One Name Means ProTek’Tion™ W smd-15 package information solder pad outline dimensions dim millimeters inches min max min max A 8.35 8.45 0.329 0.333 B 8.55 8.65 0.337 0.341 C 5.35 5.45 0.211 0.215 D 5.55 5.65 0.219 0.222 E 6.85 6.95 0.270 0.274 F 7.05 7.15 0.278 0.281 G 2.75 2.85 0.108 0.112 H 2.95 3.05 0.116 0.120 J 5.35 5.45 0.211 0.215 K 5.55 5.65 0.219 0.222 L 2.75 2.85 0.108 0.112 M 2.95 3.05 0.116 0.120 N 2.45 2.55 0.096 0.100 P 3.25 3.35 0.128 0.132 Q 3.95 4.05 0.156 0.159 R 3.55 3.65 0.140 0.144 T 3.65 3.75 0.144 0.148 Suggested Solder Pad Q P millimeters T N K J ML C D H Suggest Solder Print inches min max min max A 8.35 8.45 0.329 0.333 B 5.35 5.45 0.211 0.215 C 6.85 6.95 0.270 0.274 D 2.75 2.85 0.108 0.112 E 5.35 5.45 0.211 0.215 F 2.75 2.85 0.108 0.112 G 2.45 2.55 0.096 0.100 H 3.25 3.35 0.128 0.132 J 3.55 3.65 0.140 0.144 E F G A B solder print outline dimensions dim R J H G F E B D C A 05293.R2 3/12 Page 5 www.protekdevices.com 05293 SM15KPA17A - SM15KPA220CA Only One Name Means ProTek’Tion™ company information COMPANY PROFILE ProTek Devices, based in Tempe, Arizona USA, is a manufacturer of Transient Voltage Suppression (TVS) products designed specifically for the protection of electronic systems from the effects of lightning, Electrostatic Discharge (ESD), Nuclear Electromagnetic Pulse (NEMP), inductive switching and EMI/RFI. With over 25 years of engineering and manufacturing experience, ProTek designs TVS devices that provide application specific protection solutions for all electronic equipment/systems. ProTek Devices Analog Products Division, also manufactures analog interface, control, RF and power management products. CONTACT US Corporate Headquarters 2929 South Fair Lane Tempe, Arizona 85282 USA By Telephone General: 602-431-8101 Sales: 602-414-5109 Customer Service: 602-414-5114 By Fax General: 602-431-2288 By E-mail: Sales: [email protected] Customer Service: [email protected] Technical Support: [email protected] Web www.protekdevices.com www.protekanalog.com COPYRIGHT © ProTek Devices 2010 - This literature is subject to all applicable copyright laws and is not for resale in any manner. SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice. DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special, consequential or incidental damages. LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory. 05293.R2 3/12 Page 6 www.protekdevices.com