P-TEC PL07

P-tec Corporation
Tel:(866)695 4162
2405 Commerce Circle Tel:(719) 589 3122
Alamosa CO 81101
Fax:(719) 589 3592
www.p-tec.net
[email protected]
PL07 Series 3mm (T1) LED
Absolute Maximum Ratings at TA = 25°C
Features
*Popular 3mm Lens Style
with small Flange
*1 GaN/SiC Blue Chip used
*Color Diffused Lens with a
Wide Viewing Angle
*High Intensity
*Low Current Requirement
*Reliable and Rugged
*RoHS Compliant
Power Dissipation……………………………………………………………….….…... 135mW
Reverse Voltage (<50μA)……..…..…………...…………………………..……..…..…..…. 5.0V
Max Forward Current…………..………………..……………………….……….…..….. 30mA
Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width)………………….….…..….…… 100mA
Operating Temperature Range…………………………………………….…… -25°C to +85°C
Storage Temperature Range..………….………………….……………......… -40°C to +100°C
Soldering Temperature (1.6mm below body)……………………………...….. 260°C for 5 seconds
Electrical & Optical Characteristics at TA = 25°C
Part Number
Emitting
Color
Chip
Material
Color Diffused Lens
PL07-CDB01
Blue
GaN/SiC
Peak
Wave
Length
Dominant
Wave
Length
Viewing
Angle
2θ ½
nm
nm
Deg
Typ
Max
Min
Typ
428
466
80°
3.8
4.5
4.5
10.0
Forward
Voltage
@20mA (V)
Luminous
Intensity
@20mA (mcd)
All dimensions are in Millimeters. Tolerance is ± 0.25mm unless otherwise specified. An epoxy meniscus may extend about 1 mm down the leads.
4.3
24.0Min.
2.54 ±0.1
2.9
0.5 Square
Anode
1.0±0.5
1.02
1.5typ.
3.1
11.29.07 Rev 0