P-tec Corporation Tel:(800)688-0613 2405 Commerce Circle Tel:(719) 589 3122 Alamosa Co. 81101 Fax:(719) 589 3592 www.p-tec.net [email protected] PL011 Series 1.8mm LED Absolute Maximum Ratings at TA = 25°C Features *1.8mm Round Dome Lens with Flange *GaP Red LED Chip used *Color Diffused Lens *High Intensity *Low Current Requirement *Reliable and Rugged *RoHS Compliant Power Dissipation……………………………………………………………..…….…... 90mW Reverse Voltage (<100µA)………..…………...…………………………..……..…..…..…. 5.0V Max Forward Current…………..………………..……………………….……….…..….. 30mA Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width)………………….….…..….…… 100mA Operating Temperature Range…………………………………………….…… -25°C to +85°C Storage Temperature Range..………….………………….……………......… -40°C to +100°C Soldering Temperature (1.6mm below body)……………………………...….. 260°C for 5 seconds Electrical & Optical Characteristics at TA = 25°C Part Number Emitting Color Chip Material Color Diffused Lens PL011-CDR24 Red GaP Peak Wave Length Dominant Wave Length Viewing Angle 2θ ½ nm nm Deg Typ Max Min Typ 700 650 30° 2.1 3.0 4.0 8.0 Forward Voltage @20mA (V) Luminous Intensity @20mA (mcd) All dimensions are in Millimeters. Tolerance is ± 0.25mm unless otherwise specified. An epoxy meniscus may extend about 1 mm down the leads. 3.00 2.40 25.0 Typ. 1.55 1.45 1.80 3.30 R 1.7 Anode 03-07-07 Rev 0 RS