REVISION DESCRIPTION Changed Cable Loop Dim. From 100mm to 120mm REV. A DATE 03-12-07 APPROVED DP 4880 ± 100 1 P1 2 4 5 6 3 12 11 10 13 4 3 2 1 USB 4P(A)/M MOLDING TYPE (MOLD NO: G102-506) TAPE PIN OUT 15 14 8 2 3 1 4 USB 4P(B)/M MOLDING TYPE (MOLD NO: G102-507) No. 120 ± 20 7 P2 12.2 ± 0.4 12.2 ± 0.4 FRONT 9 P1 P2 FRONT QTY REMARKS SPECIFICATION STANDARD PARTS NAME 1 USB 4P(A)/M - CONTACT BRASS / GOLD PLATED (CRIMPING TYPE) 4 2 USB 4P(A)/M - INSULATOR PBT + G,F / WHITE UL 94V-0 1 3 USB 4P(A)/M - SHELL 1 STEEL GOLD PLATED 1 4 USB 4P(A)/M - SHELL 2 STEEL GOLD PLATED 1 5 USB 4P(A)/M - COPPER FOIL WIDTH 5xLENGTH 27 1 1 RED 1 6 USB 4P(A)/M - OUTER MOLD 45P PVC / COLOR: BLACK 1 2 GREEN 2 7 USB 4P(B)/M - CONTACT BRASS / GOLD PLATED (CRIMPING TYPE) 4 3 WHITE 3 8 USB 4P(B)/M - INSULATOR PBT + G,F / WHITE UL 94V-0 1 9 USB 4P(B)/M - SHELL 1 STEEL GOLD PLATED 1 10 USB 4P(B)/M - SHELL 2 STEEL GOLD PLATED 1 11 USB 4P(B)/M - COPPER FOIL WIDTH 5xLENGTH 27 1 12 USB 4P(B)/M - OUTER MOLD 45P PVC / COLOR: BLACK 1 13 CABLE L01007ABK01A 1 14 MINI TIE PE / BLACK 2 15 POLYBAG PE: 0.08x160x180 1 4 SHELL BLACK DRAIN BRAID 4 SHELL NOTES: 1. CABLE: UL2725 24/26AWG 26AWGx1P+24AWGx2C+FOIL+DW+BD OD: 4.5 ± 0.2, COLOR: BLACK PRINTING: “E166307 AWM 2725 24/26AWG 80°C 30V VW-1 HI-SPEED USB2.0” 2. CONNECTORS: USB 4P(A) MALE TO USB 4P(B) MALE 3. HOOD: MOLDED TYPE 4. ELECTRICAL TEST: <1>.100% OPEN SHORT & MISS WIRE TEST <2>. INSULATION RESISTANCE: DC400V 10M ohm MIN. <3>. CONDUCTOR RESISTANCE: 1 ohm MAX. 5. PACKING: 1PC/POLYBAG Dim range (mm) Tolerance +/(mm) 0-1 0.15 1-6 0.20 6-18 0.30 18-50 0.50 Qualtek Electronics Corp. Part Number: Description: WCT DIVISION 3021019-16 USB 4P(A)/M - USB 4P(B)/M REV. A 50-120 0.70 Drawn / Date Checked / Date Approved / Date 120-250 0.90 250-500 1.20 B. Grubb 01-26-07 01-26-07 JJH / 01-26-07