REVISION DESCRIPTION Deleted AWG Rating Next to P2 Pin Out / Changed Cable Spec From 30 AWG to 28 AWG REV. A DATE 03-12-07 APPROVED DP 4575 ± 100 1 2 1 P1 9 8 3 4 5 6 7 13 12 11 14 10 2 3 5 6 3 4 6.0 ± 0.2 FRONT 1394 6P/M MOLDING TYPE (TOOLING NO. G102-216) No. TAPE P1 1 16 15 2 3 4 SHELL GREEN RED BLUE ORANGE DRAIN & PAIR SPIRAL OUTER BRAID NOTES: 1. CABLE: UL20276 28AWG IEEE1394 [(28AWGx1P+FOIL+SP)x2+DW+FILLER+MYLAR+BD]x1 OUTER JACKET: BLACK, OD: 5.7 ± 0.2mm PRINTING: “E166307 AWM STYLE 20276 28AWG VW-1 IEEE AV 1394 COMPLIANT” 2. CONNECTORS: IEEE 1394 4P MALE TO IEEE 1394 6P MALE 3. HOOD: MOLDED TYPE, COLOR: BLACK 4. ELECTRICAL TEST: <1>.100% OPEN SHORT & MISS WIRE TEST <2>. INSULATION RESISTANCE: DC400V 10M ohm MIN. <3>. CONDUCTOR RESISTANCE: 1 ohm MAX. 5. PACKING: 1PC/POLYBAG PARTS NAME P2 2 FRONT QTY REMARKS SPECIFICATION STANDARD 1 4P/M - CONTACT PHOSPHOR BRONZE / GOLD PLATED 4 2 4P/M - INSULATOR PBT / BLACK UL94V-0 1 P2 3 4P/M - SHELL 1 SHELL / GOLD PLATED 1 4 4P/M - SHELL 2 SHELL / GOLD PLATED 1 5 5 SLIPCOVER PBT / TRANSPARENT 1 6 COPPER FOIL BOTH SIZES FOR SPECIAL ELECTRIC 1 7 4P/M - OUTER MOLD 45P PVC / COLOR: BLACK 1 8 6P/M - CONTACT PHOSPHOR BRONZE / GOLD PLATED 6 PIN OUT 140 ± 20 1 10.0 ± 0.5 1394 4P/M MOLDING TYPE (TOOLING NO. G102-288) 4 6 3 4 2 SHELL 9 6P/M - INSULATOR PBT / BLACK UL94V-0 1 10 6P/M - SHELL 1 & 2 SHELL / GOLD PLATED 1 11 COPPER FOIL BOTH SIZES FOR SPECIAL ELECTRIC 1 12 6P/M - INNER MOLD LDPE / NATURAL 1 13 6P/M - OUTER MOLD 45P PVC / COLOR: BLACK 1 14 CABLE UL20276 KL02004ABK01D 1 15 MINI TIE PE / BLACK 2 16 POLYBAG PE / 0.8x180x200mm 1 Dim range (mm) Tolerance +/(mm) 0-1 0.15 1-6 0.20 6-18 0.30 18-50 0.50 Qualtek Electronics Corp. WCI DIVISION Part Number: 1821021-15 Description: IEEE 1394 4P/M - IEEE1394 6P/M REV. A 50-120 0.70 Drawn / Date Checked / Date Approved / Date 120-250 0.90 250-500 1.20 B. Grubb 01-25-07 01-25-07 JJH / 01-25-07