REVISION THESE DRAWINGS ARE THE PROPERTY OF QUALTEK ELECTRONICS AND NOT TO BE REPRODUCED FOR OR COMMUNICATED TO A THIRD PARTY WITHOUT THE EXPRESS WRITTEN PERMISSION OF AN OFFICER OF QUALTEK ELECTRONICS. REV. B C ∅0.188 PHYSICAL DIMENSIONS: 5 G/Y 1 BROWN BROWN 1-2. CURRENT RATING A. @ 115 VAC..........................................5 A RMS MAX B. @ 250 VAC.........................................5 A RMS MAX 1-3. OPERATING FREQUENCY......................50/60Hz 1-4. LEAKAGE CURRENT: EACH LINE TO GROUND A. @ 115 VAC 60Hz............................0.25 mA MAX B. @ 250 VAC 50Hz.............................0.45 mA MAX 1-5. HIPOT RATING (FOR ONE MINUTE) A. LINE TO GROUND...........................2250 VDC B. LINE TO LINE.....................................1450 VDC 1-6. MINIMUM INSERTION LOSS IN dB: (AT 50 OHM SYSTEM) 4 3 .01 .05 .10 .15 .50 1.0 5.0 10 30 COM. MODE dB / / / 15 30 38 45 45 40 DIF. MODE dB / / / 6 15 20 40 45 45 FREQ. MHz 1.33 MAX 4.0MIN 0.79 MAX 4.0MIN SCHEMATIC: L: 2.9mH C1: 0.1uF C2: 3300pF APPROVED DP LY ELECTRICAL CHARACTERISTICS: 1-1. VOLTAGE RATING...................................115/250VAC BLUE BLUE DATE 06-01-06 01-09-09 RoHS Compliancy Updated Operatiing Temperature 2.52 MAX 1.77 MAX 2.13 ± 0.02 2 DESCRIPTION 1-7. OPERATING TEMPERATURE.................-25° TO +100° C 1-8. SAFETY: 1-9. RoHS COMPLIANT Dim range (mm) Tolerance +/(mm) 0-1 0.15 1-6 0.20 6-18 0.30 18-50 0.50 CONTROLLED Qualtek Electronics Corp. Part Number: Description: PPC DIVISION 851-05/006 EMI FILTER UNIT: in REV. C 50-120 0.70 Drawn / Date Checked / Date Approved / Date 120-250 0.90 250-500 1.20 B.ZHANG 01-17-03 01-17-03 JJH / 01-17-03