Qualtek 150Watts Single Output P P C Electronics Corporation QPD-150 Series Features: AC input selectable by switch (115VAC/230VAC) Wide Operating Ambient Temperature (-20°C~70°C) High Efficiency, and High Reliability Output Protections: OLP/OVP/SCP All using 105°C long life electrolytic capacitors. 100% full load burn-in test Model QPD-150-5 QPD-150-12 QPD-150-15 QPD-150-24 QPD-150-48 Output Characteristics DC Output 5V 12V 15V 24V 48V Rated Current 26A 12.5A 10A 6.5A 3.3A 0~26A 0~12.5A 0~10A 0~6.5A 0~3.3A Ripple and 0~70°C 80mV 120mV 120mV 120mV 200mV Noise -20~0°C Current Range 100mV 150mV 180mV 150mV 300mV Voltage ADJ. Range 4.2V-6.0V 10.0V-14.0V 13.0V-17.0V 21.0V-28.0V 43.0V-54.0V Voltage Accuracy ±2.0% ±1.0% ±1.0% ±1.0% ±1.0% Line Regulation ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% Load Regulation ±1.0% ±1.0% ±1.0% ±1.0% ±1.0% Set-up Time <2.0s (115VAC input, full load); <1.0s (230VAC input, full load) Hold-up Time >10ms (115VAC input, full load); >20ms (230VAC input, full load) Temperature Coefficient ±0.03%/°C Overshoot and Undershoot <5.0% Input Characteristics 88VAC/176VAC~132VAC/264VAC Voltage Range Frequency Range 47Hz-63Hz Efficiency 115VAC Input 78% 83% 83% 84% 85% (Typical) 230VAC Input 79% 83% 84% 85% 86% AC Current (max) ≤3.5A/2.0A Inrush Current (Typical) 20A@115VAC Cold start 40A@230VAC Cold start Leakage Current <0.25mA/115VAC <2.0mA/230VAC Protection Over Load (OLP) 105%~150% of rated output current, hiccup mode, auto recovery Over Voltage (OVP) 120%~150% of rated output voltage, shut down, re-power on to recover Short Circuit (SCP) Long-term mode, auto recovery Environmental Characteristics Operating Amb. Temp. & Hum -20°C~70°C; 20%~90% RH Non-Condensing Storage Temp. & Hum -40°C~85°C: 10%-95% RH Non-Condensing Safety Standards UL60950-1; EN60950-1: 2006 Withstand Voltage Primary-Secondary: 3.0KVAC;≤10mA. Primary-PG: 1.5KVAC;≤10mA. Secondary-PG: 0.5KVDC;≤10mA Isolation Resistance ≥100M ohms EMI Conduction & Radiation Compliance to EN55022(CISPR22) Class B Harmonic Current Compliance to EN61000-3-2,-3 EMS Immunity Compliance to EN61000-4-2, 3, 4, 5, 6, 8, 11; ENV50204, light industry level, criteria A General Characteristics MTBF (MIL-HDBK-217F) More than 100,000Hrs (25°C, Full load) Dimension (LxWxH) 199x98x38mm Packing 20PCS/CTN. G.W: 15.0kgs Cooling Method Cooling by free air convection Page 1 of 2 150Watts Single Output Qualtek Electronics Corporation P P C QPD-150 Series MECHANICAL SPECIFICATIONS Pin No. Assignment 1 AC-L 2 AC-N 3 F.G 4,5 DC output -V 6,7 DC output +V UNIT: mm ISO-9001 Company www.qualtekusa.com Page 2 of 2