T- 5 0 50W Triple Output Switching Power Supply series Features : AC input range selectable by switch Protections:Short circuit/Over load Cooling by free air convection 100% full load burn-in test Fixed switching frequency at 24KHz I/P-O/P:Rated Low cost High reliability 1 year warranty SPECIFICATION MODEL OUTPUT T-50A CH3 CH1 CH2 CH3 CH1 CH2 CH3 CH1 CH2 DC VOLTAGE 5V 12V -5V 5V 12V -12V 5V 15V -15V 5V 12V 24V RATED CURRENT 7A 1A 1A 5A 1A 1A 4A 1A 1A 3A 1A 1A CURRENT RANGE 0.6 ~ 7A 0.2 ~ 1A 0.2 ~ 1A 0.6 ~ 5A 0.2 ~ 1A 0.2 ~ 1A 0.6 ~ 4A 0.2 ~ 1A 0.2 ~ 1A 0.6 ~ 4A 0.2 ~ 1.2A 0.2 ~ 1.2A RATED POWER 52W 51W CH1:4.75 ~ 5.5V 2.0% 5.0% 5.0% CH1:4.75 ~ 5.5V 2.0% 5.0% 5.0% CH1:4.75 ~ 5.5V 2.0% 5.0% 5.0% CH1:4.75 ~ 5.5V 2.0% 6.0% 6.0% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 1.0% 1.0% LOAD REGULATION 1.0% 4.0% 4.0% 1.0% 4.0% 4.0% 1.0% 4.0% 4.0% 1.0% 5.0% 5.0% SETUP, RISE TIME 200ms, 100ms at full load HOLD TIME (Typ.) 16ms at full load VOLTAGE RANGE 85 ~ 132VAC/170 ~ 264VAC selected by switch FREQUENCY RANGE 47 ~ 63Hz EFFICIENCY (Typ.) 66% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 1.6A/115VAC WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE ISOLATION RESISTANCE MTBF DIMENSION PACKING NOTE 50W LINE REGULATION WORKING TEMP. OTHERS 49W CH3 RIPPLE & NOISE (max.) Note.2 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 50mVp-p 120mVp-p 120mVp-p VOLTAGE ADJ. RANGE PROTECTION OVER LOAD EMC T-50D CH2 LEAKAGE CURRENT SAFETY & T-50C CH1 VOLTAGE TOLERANCE Note.3 INPUT T-50B OUTPUT NUMBER 200ms, 80ms at full load 240 ~ 370VDC 69% 71% 72% 0.8A/230VAC COLD START 20A/115VAC <0.5mA / 240VAC 40A/230VAC 105 ~ 150% rated output power Protection type : Fold back current limiting, recovers automatically after fault condition is removed 20 ~ 90% RH non-condensing -10 ~ +65 (Refer to output load derating curve), 20 ~ 90% RH -20 ~ +85 , 10 ~ 95% RH 0.03%/ (0 ~ 50 )on +5V output 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes Design refer to UL1012 I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC 470.2K hrs min. MIL-HDBK-217F (25 159*97*38mm (L*W*H) 0.54Kg; 24pcs/14Kg/0.75CUFT ) 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. File Name:T-50-SPEC 2005-09-06 T- 5 0 50W Triple Output Switching Power Supply Mechanical Specification Case No. 901 4.5 series Unit:mm 3.5 7 152.5 1 65 8.25 2 3 5 6.5 6 2-M 97 84.5 4 3 7 8 3.5 4.5 78 24 159 150 22 3.5 38 3 28.5 3.5 3-M 18 18.5 9 9 6.5 117 Terminal Pin. No Assignment Pin No. 1 2 3 Assignment AC/L AC/N FG Pin No. 4 5,7 6 Assignment DC OUTPUT DC OUTPUT COM DC OUTPUT +V2 Pin No. 8 MODEL Assignment DC OUTPUT +V1 Output Derating Pin No. 4 T-50A T-50B T-50C T-50D -5V -12V -15V +24V Static Characteristics (B) Ta=25 80 LOAD (%) 60 40 20 5.2 12 5.0 -12V +5V 300 250 +12V 11 4.8 200 10 4.6 150 9 4.4 8 4.2 7 4.0 100 +5V 50 +12V 25 OUTPUT RIPPLE (mVp-p) OUTPUT VOLTAGE (V) 100 13 -12V -10 -10 0 0 10 20 35 25 45 55 AMBIENT TEMPERATURE ( ) 65 55 (VERTICAL) (HORIZONTAL) 60 120 85 170 90 180 95 190 100 200 105 210 110 220 115 230 120 240 125 250 130 260 INPUT VOLTAGE (V) 60Hz File Name:T-50-SPEC 2005-09-06