Product Preview WM71004-6-NF1 4Kbit Wireless Memory Inlay DESCRIPTION SPECIFICATIONS The WM71004-6-NF1 is an inlay based on the WM71004-DG packaged device. Like all MaxArias wireless memories based on F-RAM memory technology the WM71004-6-NF1 features: For a full list of specifications please refer to the WM710xx datasheet. Large User Memory for Data-Rich Applications High Speed Writes Increased Write Range High Gamma Tolerance This datasheet covers the specification relevant to the inlay. For the full specifications please refer to the WM710xx datasheet. ORDERING INFORMATION Environmental Specifications Operational Temperature Range -40°C to +85°C Shelf Life 2 years Recommended Storage Conditions -25°C to +50°C, 20% to 90% RH, noncondensing Product Specifications Operating Frequency Range 860MHz to 960MHz Peak Operating Frequency 915MHz Product Description WM71004-6-NF1 Near Field Inlay with 4Kb memory Material Specifications WM71004-6-NF1-Roll Roll of inlays. 2.5K inlays per reel. Aluminum/Copper/Ink on 0.0508 mm (0.002”) PET with anti-tarnish coating, photo etched. Care should be exercised when handling the WM71004-6-NF1. Users should take ESD precautions to prevent ESD discharges on the inlay antenna. This is a product that has fixed target specifications but are subject to change pending characterization results. Rev. 0.1 Sept 2011 Ramtron International Corporation 1850 Ramtron Drive, Colorado Springs, CO 80921 (800) 545-FRAM, (719) 481-7000 http://www.ramtron.com Page 1 of 3 WM71004-6-NF1 – 4Kb Wireless Memory Inlay MECHANICAL DRAWINGS Notes: 1. 2. 3. 4. 5. 6. 7. Conductor side of antenna is shown face up. In-Progression image requirement = 21 antenna rows. Tolerance ±0.3mm between prints. Core Length: 74.2 ±3.8mm (2.9” ± 0.15”) Core ID: 76.97 ±0.25mm (3.00” ±0.125”) Core wall thickness: 3.18 +3.0/-0.0 mm (0.125” +0.12/-0.00”) Antenna conductor unwinds facing toward core Smallest Antenna feature .0.076mm (0.003”) SHIPMENT DETAILS WM71004-6-NF1 parts will be cut from the roll unless a complete roll is ordered (WM71004-6-NF1-Roll). Some inlays on the roll may not be functional. These will be indicated with a red ink dot beside the faulty inlay. Rev. 0.1 Sept 2011 Page 2 of 3 WM71004-6-NF1 – 4Kb Wireless Memory Inlay REVISION HISTORY Revision 0.1 Rev. 0.1 Sept 2011 Date 9/30/2011 Summary Initial release. Page 3 of 3