RADIO FREQUENCY IDENTIFICATION SYSTEMS Data Sheet Tag-it HF Transponder Inlay Square Specifications: Part Number RI-I01-110A RI-I11-110A Recommended Operating frequency 13.56 MHz Passive Resonance Frequency (at +25°C) 14.36 MHz ± 200kHz (includes frequency offset to compensate further integration into paper; drops down to operating frequency when exposed to activation field strength) Typical activation field strength read (at +25°C) 103 dBµA/m Typical activation field strength write (at +25°C) 108 dBµA/m Factory programmed Read Only Number 32 bits Memory (user programmable) 256 bits organized in 8 x 32-bit blocks Typical programming cycles (at +25°C) 100,000 Data retention time (at +55°C) > 10 years Simultaneous Identification of Tags Up to 50 tags per second (reader/antenna dependant) Uplink / downlink data rates 26.7 kBd / 6.2 and 9 kBd RX modulation Pulse-width coded, AM 100% modulation TX frequencies Manchester encoded, A = fc ± 423.75 kHz, B = fc ± 484.29 kHz Low bit: transition A to B. High bit: transition B to A Antenna size 45 mm x 45 mm (∼1.77 in x ∼1.77 in) Foil width 48 mm ± 0.5 mm (1.89 in ± 0.02 in) Foil pitch 48 mm +0.1mm/-0.4mm (∼1.89 in) Thickness Chip: 0.355mm (∼0.014 in) Antenna: 0.085mm (∼0.0033 in) Base material Substrate: PET (Polyethylenetherephtalate) Antenna: Aluminum Smallest bending radius allowed 18 mm (∼0.71 in) Operating temperature -25°C to +70°C Storage temperature (single inlay) -40°C to +85°C (warpage may occur with increasing temperature) Storage temperature (on reel) -40°C to +40°C Delivery Single row tape wound on cardboard reel with 500 mm diameter Reel width: approx. 60 mm (∼2.36 in); inside 50 mm (∼1.97 in) Hub diameter: 76.2 mm (3 in) Typical quantity per reel 5,000 50.8 mm +0.1mm/-0.4mm (2 in) For more information, contact the sales office or distributor nearest you. This contact information can be found http://www.ti-rfid.com on our web site at: Texas Instruments reserves the right to change its products and services at any time without notice. TI provides customer assistance in various technical areas, but does not have full access to data concerning the uses and applications of customers products. Therefore, TI assumes no responsibility for customer product design or for infringement of patents and/or the rights of third parties, which may result from assistance provided by TI. © Copyright 2001 Texas Instruments Incorporated. 11-09-22-089 03/01