RF1353C ® • • • • • Designed for 345 MHz Wireless Applications Advanced (Lithium Tantelate) LiTaO3 design for low Insertion Loss Designed for match to 50 ohms, no external LC required Hermetically sealed Surface Mount package Complies with Directive 2002/95/EC (RoHS) Pb 345.00 MHz SAW Filter Absolute Maximum Ratings Rating Maximum Input Power DC Voltage Between Terminals Case Temperature Value +10 30 -40 to +85 Units dBm VDC °C SM5050-8 Case Electrical Characteristics Characteristic Nominal Operating Frequency Passband Insertion Loss Sym fC Minimum Typical 345 Maximum 4.5 dB Fc±70 Fc±430 Fc±1100 kHz IL 3.0 dB Bandwidth Rejection Notes Fc-10.7 MHz 15 Fc-21.4 MHz 40 Matching Untuned response Ambient Temperature Operating Range dB dB Ω 50 -10 Footprint Size: 5.0 X 5.0 Units MHz 70 °C SM5050-8 Lid Symbolization (YY=Year, WW=week, S=shift) RFM, 446, YYWWS Electrical Connections Connection Terminals RF Input 2 RFOutput 6 Case Ground All Others CAUTION: Electrostatic Sensitive Device. Observe precautions for handling. Notes: 1.) All specifications apply over the operating temperature range with filter soldered to the specified demonstration board unless noted otherwise. 2.) Ultimate rejection is dependent on PCB layout. 3.) Specifications subject to change without notice. 4.) Electrostatic Sensitive Device. Observe precautions for handling. 5.) US and international patents may apply. 6.) RFM, RFM logo, and RF Monolithics, Inc. are registered trademarks of RF Monolithics, Inc. RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 ©1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. E-mail: [email protected] http://www.rfm.com RF1353C-052903 Page 1 of 5 345.00 MHz SAW Filter SM5050-8 Case 8-Terminal Ceramic Surface-Mount Case 5.0 X 5.0 mm Nominal Footprint Case Dimensions Dimension A B C D E F G Min 4.8 4.8 mm Nom 5.0 5.0 2.39 2.08 1.17 0.64 2.54 Max 5.2 5.2 1.7 Min Inches Nom 0.1968 0.1968 Max 0.0669 0.0818 0.046 0.0252 0.100 2.69 Electrical Connections Connection Terminals Port 1 Differential Input 1, 2 Port 2 Differential Output 5, 6 Ground All others Single Ended Operation Return is ground Differential Operation Return is hot Dot indicates Pin 1 TOP VIEW BOTTOM VIEW A E C B 8 8 1 7 D 7 1 2 6 6 2 3 5 5 3 4 G 4 F RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 ©1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. E-mail: [email protected] http://www.rfm.com RF1353C-052903 Page 2 of 5 345.00 MHz SAW Filter "B" REF. 100 REF. Tape and Reel Specifications “B “ Nominal Size Quantity Per Reel Inches millimeters 7 178 1000 13 330 3000 See Detail "A" 13. 0 12.0 20 .2 2.0 COMPONENT ORIENTATION and DIMENSIONS Carrier Tape Dimensions Ao 5.3 mm Bo 5.3 mm Ko 2.0 mm Pitch 8.0 mm W 12.0 mm PIN #1 USER DIRECTION OF FEED RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 ©1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. E-mail: [email protected] http://www.rfm.com RF1353C-052903 Page 3 of 5 345.00 MHz SAW Filter RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 ©1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. E-mail: [email protected] http://www.rfm.com RF1353C-052903 Page 4 of 5 345.00 MHz SAW Filter RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 ©1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. E-mail: [email protected] http://www.rfm.com RF1353C-052903 Page 5 of 5