1-1-2 Switching Mode Regulator ICs SI-8000S Series Full-Mold, Separate Excitation Step-down Switching Mode Regulator ICs ■Features ■Lineup • Compact full-mold package (equivalent to TO220) Part Number SI-8033S SI-8050S SI-8090S SI-8120S SI-8150S VO(V) 3.3 5.0 9.0 12.0 15.0 IO(A) • Output current: 3.0A • High efficiency: 79 to 91% 3.0 ■Absolute Maximum Ratings • Requires only 4 discrete components Parameter Symbol Ratings VIN 43* V PD1 18(With infinite heatsink) W PD2 1.5(Without heatsink, stand-alone operation) W Tj +125 °C Storage Temperature Tstg –40 to +125 °C SW Terminal Applied Reverse Voltage VSW –1 V Thermal Resistance(junction to case) θ j-c 5.5 °C/W • Internally-adjusted phase correction and output voltage DC Input Voltage • Built-in reference oscillator (60kHz) Power Dissipation • Built-in overcurrent and thermal protection circuits Junction Temperature • Built-in soft start circuit (Output ON/OFF available) Unit *35V for SI-8033S ■Applications • Power supplies for telecommunication equipment • Onboard local power supplies ■Recommended Operating Conditions Ratings Parameter Symbol SI-8033S SI-8050S SI-8090S SI-8120S SI-8150S 5.5 to 28 7 to 40 12 to 40 15 to 40 18 to 40 Unit DC Input Voltage Range VIN Output Current Range IO 0 to 3.0 A Tjop –30 to +125 °C Operating Junction Temperature Range V ■Electrical Characteristics (Ta=25°C) Ratings Parameter SI-8000S*1 Output Voltage SI-8033S Symbol SI-8000SS VO min. typ. 3.17 3.234 Conditions Conditions Oscillation Frequency Line Regulation Load Regulation Temperature Coefficient of Output Voltage Overcurrent Protection Starting Current f Conditions ∆VOLINE Conditions IS1 ICs Unit min. typ. max. min. typ. max. min. typ. max. 3.30 3.43 4.80 5.00 5.20 8.55 9.00 9.45 11.50 12.00 12.50 14.25 15.00 15.75 3.30 3.366 4.90 5.00 5.10 V VIN=20V, IO=1.0A VIN=21V, IO=1.0A VIN=24V, IO=1.0A VIN=25V, IO=1.0A 79 84 88 90 91 VIN=15V, IO=1.0A VIN=20V, IO=1.0A VIN=21V, IO=1.0A VIN=24V, IO=1.0A VIN=25V, IO=1.0A 60 60 60 60 60 VIN=15V, IO=1.0A VIN=20V, IO=1.0A VIN=21V, IO=1.0A VIN=24V, IO=1.0A VIN=25V, IO=1.0A 80 40 100 50 120 60 130 60 % kHZ 130 VIN=10 to 30V, IO=1.0A VIN=15 to 30V, IO=1.0A VIN=18 to 30V, IO=1.0A VIN=21 to 30V, IO=1.0A 10 10 10 10 10 30 40 40 40 VIN=20V, IO=0.5 to 1.5A VIN=21V, IO=0.5 to 1.5A VIN=24V, IO=0.5 to 1.5A VIN=25V, IO=0.5 to 1.5A ±0.5 ±0.5 ±1.0 ±1.0 ±1.0 3.1 3.1 VIN=15V 3.1 VIN=20V 3.1 VIN=21V mV 40 VIN=15V, IO=0.5 to 1.5A *1: “S” may be printed to the right of the marking (except SI-8090S, SI-8120S, SI-8150S). 62 SI-8150S max. 25 ∆VO/∆Ta Conditions SI-8120S typ. VIN=8 to 28V, IO=1.0A ∆VOLOAD Conditions SI-8090S min. VIN=15V, IO=1.0A η Efficiency SI-8050S max. mV mV/°C 3.1 VIN=24V VIN=25V A SI-8000S Series ■External Dimensions (TO220F-5) (Unit : mm) ±0.2 4.2 2.8±0.2 ±0.2 Pin Assignment q VIN w SWOUT e GND r VOS t S.S (2.0) 2.6±0.1 (17.9) 16.9±0.3 4.0±0.2 7.9±0.2 φ 3.2±0.2 0.5 10.0 0.95±0.15 (8.0) (4.6) +0.2 0.85 –0.1 +0.2 0.45 –0.1 P1.7±0.7×4=6.8±0.7 3.9±0.7 (4.3) 8.2±0.7 Plastic Mold Package Type Flammability: UL94V-0 Product Mass: Approx. 2.3g Forming No. 1101 1 2 3 4 5 ■Block Diagram VIN 1 2 SWOUT OCP Reg. OSC Reset Drive Comp. TSD 4 VOS Amp. VREF 5 S.S. 3 GND ■Typical Connection Diagram VIN 1 L1 2 VIN SI-8000S + VO SWOUT D1 + C1 C2 VOS S.S GND 5 3 C1,2 : 1000µF L1 : 150µH D1 : RK46(Sanken) 4 GND GND ■Ta-PD Characteristics PD=VO•IO 20 Power Dissipation PD (W) Infinite heatsink 15 With Silicone Grease Heatsink: Aluminum 200×200×2mm (2.3°C/W) 100×100×2mm 10 (5.2°C/W) 5 Without heatsink 0 –25 0 25 50 75 100 –VF•IO 1– VO VIN The efficiency depends on the input voltage and the output current. Therefore, obtain the value from the efficiency graph and substitute the percentage in the formula above. VO VIN IO ηx VF 75×75×2mm (7.6°C/W) 100 –1 ηχ : : : : : Output voltage Input voltage Output current Efficiency (%) Diode D1 forward voltage 0.5V(RK46) 125 Operating Ambient Temperature Ta (°C) Thermal design for D1 must be considered separately. ICs 63