SCHURTER GRF2

GRF2
Power Entry Modules with Line Filter
www.schurter.com/pg06
IEC Appliance Inlet C14 with Shielding, "Lock and Shield" Mounting
GRF2: only with shield, without line filter
C14
70° C
Description
Characteristics
Approvals
Other versions on request
-Panel Mount:
Snap-in version from rear-side
-2 Functions:
Appliance Inlet Protection class I, with EMC-shield
-Alternative: version with line filter
-Time saving "Lock and Shield" snap-in design for rear-panel mounting
-All single elements are already wired
-Innovative EMC-shielding with flexible steel segments for an excellent
contact to the panel
-Qualified for use in equipment according IEC/EN 60950
-With solder terminals
-VDE License Number: 40025743
-UL License Number: E96454
-CSA License Number: 38456
References
General Product Information
Weblinks
Approvals, RoHS, CHINA-RoHS, Mating Connectors, e-Store,
Distributor-Stock-Check, Accessories
Technical Data
Ratings IEC
Ratings UL/CSA
Dielectric Strength
Allowable Operation Temp.
Climatic Category
Degree of Protection
Protection Class
Terminal
Panel Thickness s
Material: Housing
10 A @ Ta 40 °C / 250 VAC; 50 Hz
15 A @ Ta 40 °C / 125 VAC; 60 Hz
> 1.7 kVDC between L-N
> 2.7 kVDC between L/N-PE
Test voltage (2 sec)
-25 °C to 85 °C
25/085/21 acc. to IEC 60068-1
from front side IP 40 acc. to IEC 60529
Suitable for appliances with protection
class 1 acc. to IEC 61140
Quick connect terminals 4.8 x 0.8 mm
Plug Connector
Solder terminal on request
Snap-in: 1.2/1.5/2 mm
Thermoplastic, black, UL 94V-0
Appliance-Inlet/-Outlet
C14 acc. to IEC/EN 60320-1,
UL 498, CSA C22.2 no. 42 (for cold
conditions) pin-temperature 70 °C, 10 A,
Protection Class 1
> 3'300'000 h acc. to MIL-HB-217 F
MTBF
Dimensions
GRF2
M4
47.5
22.9
22.9
8.8
20.8 ±0.1
1)
1)
22.6
M4
4.8 +0.2 max.29
max. R1.5
30.5 ±0.1
S ±0.1
1) Terminal for earth screw M4
1) Terminal for earth screw M4
This area must be conductive for optimal
shielding. Do not apply paint or coatings.
EMC Products
GRF2
Power Entry Modules with Line Filter
www.schurter.com/pg06
Dimensions
Step 1
Step 2
Step 3
Push the socket upwards.
Push the socket forward into the panel
cut-out.
Place the socket in top edge of the panel
cut-out.
Step 4
Release the socket. The component is
self adjusting.
Variants
Panel Thickness
s [mm]
Additional ground terminal
Order Number
without
1.2
-
GRF2.0212.11
15
without
1.5
-
GRF2.0215.11
15
without
2
-
GRF2.0220.11
10
15
without
1.2
quick connect terminal 4.8 x 0.8
GRF2.0312.11
10
15
without
1.5
quick connect terminal 4.8 x 0.8
GRF2.0315.11
10
15
without
2
quick connect terminal 4.8 x 0.8
GRF2.0320.11
Rated Current
IEC [A]
Rated Current
UL [A]
10
15
10
10
Packaging unit Filter-Type
100 Pcs Mating Outlets/Connectors
Category / Description
Appliance Outlet Overview complete
IEC Appliance Outlet F, Screw-on Mounting, Front Side, Solder or Quick-connect Terminal
4787
IEC Appliance Outlet F, Snap-in Mounting, Front Side, Solder or Quick-connect Terminal
4788
IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder, PCB or Quick-connect Terminal
5091
IEC Appliance Outlet F or H, Screw-on Mounting, Front Side, Solder or Quick-connect Terminal
5092
Appliance Outlet further types to GRF2
Connector Overview complete
IEC Connector C15, Rewireable, Straight
0101
IEC Connector C15A, Rewireable, Straight
0102
IEC Connector C15A, Rewireable, Straight
0102-G
IEC Connector C15A, Rewireable, Angled
0112
IEC Connector C13, Rewireable, Angled
4012
Connector further types to GRF2
...
Power Cord Overview complete
Power Cord with IEC Connector C13, Angled
0311
Power Cord with IEC Connector C13, Angled
3011
Power Cord with IEC Connector C13, Angled
3012
Power Cord with IEC Connector C13, Angled
3013
Power Cord with IEC Connector C13
3020
Power Cord further types to GRF2
...
EMC Products
GRF2
Power Entry Modules with Line Filter
www.schurter.com/pg06
The specifications, descriptions and illustrations indicated in this document
are based on
EMC Products
current information. All content is subject to modifications and amendments.