SCS751S VOLTAGE 40V SOD-523 Types Elektronische Bauelemente 0.03 Amp Surface Mount Schottky Barrier Rectifiers RoHS Compliant Product A suffix of "-C" specifies halogen & lead-free SOD-523 5 . Small Surface Mounting Type . Low Reverse Current and Low Forward Voltage . High Reliability 1.6±0.1 ƔFEATURES 1.2±0.05 CATHODE MARK 0.3±0.05 0.12±0.05 0.8±0.05 0.6±0.1 Dimensions in millimeters ƔMECHANICAL DATA . Case: SOD-523, Molded Plastic . Terminals: Solderable per MIL-STD-202, Method 208 . Polarity: See Diagrams Below . Mounting Position: Any ƔMAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating 25ȃ ambient temperature unless otherwise specified. Single phase half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. TYPE NUMBER Maximum Recurrent Peak Reverse Voltage DC Reverse Voltage Maximum Average Forward Rectified Current Peak Forward Surge Current, 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Maximum Instantaneous Forward Voltage @ IF=1.0 mA Maximum DC Reverse Current, Ta=25к @ VR=30 V Capacitance Between Terminals, VR=1V, f=1MHz Operating Temperature Range Storage Temperature Range Note: ESD sensitive product handling required http://www.SeCoSGmbH.com/ 01-Jul-2009 Rev. B SYMBOL VRM VR IF SCS751S 40 30 30 UNITS V V mA IFSM 200 mA VF IR CT TJ TSTG 0.37 0.5 2.0 125 -40 ~ +125 V µA pF ȃ ȃ Any changing of specification will not be informed individual Page 1 of 2 SCS751S VOLTAGE 40V SOD-523 Types Elektronische Bauelemente 0.03 Amp Surface Mount Schottky Barrier Rectifiers ƔELECTRICAL CHARACTERISTICS ( Ta=25к ) 1000m 100µ Ta = 75°C =1 1m REVERSE CURRENT : IR (A) 25 °C 10m Ta = 25°C 100µ Ta = -25°C 10µ 1µ 0 CAPACITANCE BETWEEN TERMINALS : CT (pF) Ta = 125°C 100m Ta FORWARD CURRENT : IF (A) Typ. pulse measurement 0.2 0.4 0.6 0.8 1.0 1.2 1.4 10µ Ta = 75°C 1µ Ta = 25°C 100n Ta = -25°C 10n 1n 0 Typ. pulse measurement 5 10 15 20 25 30 FORWARD VOLTAGE : VF (V) REVERSE VOLTAGE : VR (V) Fig. 1 Forward characteristics Fig. 2 Reverse characteristics 100 35 Ta = 25°C f = 1MHz 50 20 10 5 2 1 0 2 4 6 8 10 12 14 REVERSE VOLTAGE : VR (V) Fig. 3 Capacitance between terminals characteristics http://www.SeCoSGmbH.com/ 01-Jul-2009 Rev. B Any changing of specification will not be informed individual Page 2 of 2