UMH11N NPN Multi-Chip Built-in Resistors Transistor Elektronische Bauelemente RoHS Compliant Product SOT-363 Features .055(1.40) .047(1.20) * Mounting possible with UMT3 automatic mounting machines. o 8 o 0 .026TYP (0.65TYP) .021REF (0.525)REF * Transistor elements are independent, eliminating interference. .053(1.35) .045(1.15) .096(2.45) .085(2.15) * Mounting cost and area can be cut in half. * Two DTC114E chips in a UMT package .018(0.46) .010(0.26) .014(0.35) .006(0.15) MARKING： H11 .006(0.15) .003(0.08) .087(2.20) .079(2.00) .043(1.10) .035(0.90) .004(0.10) .000(0.00) .039(1.00) .035(0.90) Dimensions in inches and (millimeters) Absolute maximum ratings(Ta=25℃) Parameter Symbol Limits Unit Supply voltage VCC 50 V Input voltage VIN -10~ 40 V IO 50 IC(MAX) 100 Power dissipation Pd 150(TOTAL) mW Junction temperature Tj 150 ℃ Storage temperature Ts tg -55~ 150 ℃ Output current mA Electrical characteristics (Ta=25℃) Parameter Input voltage Symbol Min. Typ VI(off) VI(on) Max. 0.5 3 Unit Conditions VCC=5V ,IO=100µA V VO=0.3V ,IO=10 mA Output voltage VO(on) 0.3 V IO/II=10mA/0.5mA Input current II 0.88 mA VI=5V Output current IO(off) 0.5 µA VCC=50V, VI=0 DC current gain GI 30 Input resistance R1 7 10 13 Resistance ratio R2/R1 0.8 1 1.2 Transition frequency fT http://www.SeCoSGmbH.com 01-Jan-2006 Rev. B VO=5V ,IO=5mA 250 KΩ MHz VCE=10V ,IE=-5mA,f=100MHz Any changing of specification will not be informed individual Page 1 of 2 UMH11N NPN Multi-Chip Built-in Resistors Transistor Elektronische Bauelemente Typical Characteristics 10m VO=0.3V OUTPUT CURRENT : Io (A) INP UT V OLT AG E : V I (on) (V ) 20 10 Ta=−40°C 25°C 100°C 5 2 1 500m 1k VCC=5V 5m 50 VO=5V 500 Ta=100°C 25°C −40°C 2m Ta=100°C 25°C −40°C 1m 500µ DC CURRENT GAIN : GI 100 200µ 100µ 50µ 20µ 10µ 200 100 50 20 10 5 5µ 2 200m 2µ 100m 100µ 200µ 1µ 500µ 1m 2m 5m 10m 20m 50m 100m OUT P UT C UR R E NT : I O (A) Fig.1 Input voltage vs. output current (ON characteristics) 1 0 0.5 1 1.5 2 2.5 3 INPUT VOLTAGE : VI (off) (V) Fig.2 Output current vs. input voltage (OFF characteristics) 1 100µ 200µ 500µ 1m 2m 5m 10m 20m 50m 100m OUTPUT CURRENT : IO (A) Fig.3 DC current gain vs. output current lO/lI=20 OUTPUT VOLTAGE : VO (on) (V) 500m Ta=100°C 25°C −40°C 200m 100m 50m 20m 10m 5m 2m 1m 100µ 200µ 500µ 1m 2m 5m 10m 20m 50m 100m OUTPUT CURRENT : IO (A) Fig.4 Output voltage vs. output current http://www.SeCoSGmbH.com 01-Jan-2006 Rev. B Any changing of specification will not be informed individual Page 2 of 2