SENSITRON 2N7236

SENSITRON
SEMICONDUCTOR
2N7236
TECHNICAL DATA
DATA SHEET 586, REV -
HERMETIC POWER MOSFET
P-CHANNEL
FEATURES:
œ -100 Volt, 0.20 Ohm MOSFET
œ Isolated and Hermetically Sealed
œ Simple Drive Requirements
œ Repetitive Avalanche Rating
MAXIMUM RATINGS
RATING
GATE TO SOURCE VOLTAGE
CONTINUOUS DRAIN CURRENT
ALL RATINGS ARE AT TA = 25•C UNLESS OTHERWISE SPECIFIED.
VGS=10V, TC = 25•C
VGS=10V, TC = 100•C
PULSED DRAIN CURRENT
@ TC = 25•C
OPERATING AND STORAGE TEMPERATURE
TERMAL RESISTANCE JUNCTION TO CASE
TOTAL DEVICE DISSIPATION @ TC = 25•C
ELECTRICAL CHARACTERISTICS
DRAIN TO SOURCE BREAKDOWN VOLTAGE
VGS = 0V, ID = 1.0mA
DRAIN TO SOURCE ON STATE RESISTANCE
VGS = -10V, ID = -11A
VGS = -10V, ID = -18A
GATE THRESHOLD VOLTAGE VDS = VGS, ID = -250mA
FORWARD TRANSCONDUCTANCE
VDS ˜ -15V, IDS = -11A
ZERO GATE VOLTAGE DRAIN CURRENT
VDS = 0.8xMax. Rating, VGS = 0V
VDS = 0.8xMax. Rating
VGS = 0V, TJ = 125•C
GATE TO SOURCE LEAKAGE FORWARD
@ RATED
GATE TO SOURCE LEAKAGE REVERSE
VGS
TOTAL GATE CHARGE
VGS = 10 VOLTS,
GATE TO SOURCE CHARGE
50% RATED VDS,
GATE TO DRAIN CHARGE
RATED ID
TURN ON DELAY TIME
VDD = -50V,
RISE TIME
RATED ID,
TURN OFF DELAY TIME
RG = 9.1W
FALL TIME
DIODE FORWARD VOLTAGE
TJ = 25•C, IS = 34A,
VGS = 0V
DIODE REVERSE RECOVERY TIME
TJ = 25•C,
REVERSE RECOVERY CHARGE
If = RATED ID,
di/dt = -100A/sec
INPUT CAPACITANCE
VGS = 0 Volts,
OUTPUT CAPACITANCE
VDS = 25 Volts,
REVERSE TRANSFER CAPACITANCE
f = 1 MHz
SYMBOL
VGS
ID
MIN.
-
TYP.
-
UNITS
Volts
Amps
-
MAX.
–20
-18
-11
-72
150
0.83
125
IDM
TOP/TSTG
R JC
PD
-55
-
BVDSS
-100
-
-
Volts
-
-
-2.0
6.2
-
-
-
IGSS
-
-
Qg
Qgs
Qgd
td(ON)
tr
td(ON)
tf
VSD
31
3.7
7.0
-
-
-
-
trr
Qrr
-
Ciss
Coss
Crss
-
RDS(ON)
VGS(th)
gfs
IDSS
0.20
0.22
-4.0
-25
-250
Amps
•C
•C/W
Watts
W
Volts
S(1/W)
mA
100
-100
60
13
35.2
35
85
85
65
-4.2
Volts
-
280
3.6
nsec
mC
1400
600
200
-
pF
œ 221 West Industry Court 3 Deer Park, NY 11729-4681 3 (631) 586-7600 FAX (631) 242-9798 œ
œ World Wide Web Site - http://www.sensitron.com œ E-Mail Address - [email protected] œ
nA
nC
nsec
2N7236
SENSITRON
DATA SHEET 586, REV. -
MECHANICAL DIMENSIONS: in Inches / mm
.149 (3.78
Dia.
.139 3.53)
.545 (13.84
.535 13.60)
.045 (1.14
.035 0.89)
3 Places
(6.60
6.32)
(1.27
1.02)
.800 (20.32
.790 20.07) .545 (13.84
.535 13.58)
.685 (17.40
.665 16.89)
1.235 (31.37
1.195 30.35)
.260
.249
.050
.040
1 2 3
.150(3.81) BSC
2 Places
.150(3.81) BSC
TO-254
PINOUT TABLE
DEVICE TYPE
MOSFET
TO-254 PACKAGE
PIN 1
DRAIN
PIN 2
SOURCE
PIN 3
GATE
œ 221 West Industry Court 3 Deer Park, NY 11729-4681 3 (631) 586-7600 FAX (631) 242-9798 œ
œ World Wide Web Site - http://www.sensitron.com œ E-Mail Address - [email protected] œ
SENSITRON
SEMICONDUCTOR
TECHNICAL DATA
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version
of the datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment,
medical equipment, and safety equipment), safety should be ensured by using semiconductor devices that feature assured safety or by
means of users’ fail-safe precautions or other arrangement.
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during
operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual
property claims or any other problems that may result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from
use at a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of
Sensitron Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will
hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third
party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and
regulations.
• 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 •
• World Wide Web - http://www.sensitron.com • E-Mail Address - [email protected]