SHD218414 SHD218414A SHD218414B SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 780, REV. - HERMETIC POWER MOSFET N-CHANNEL FEATURES: • 1000 Volt, 3.0 Ohm, 3A MOSFET • Electrically Isolated, Hermetically Sealed • Electrically Equivalent to MTC3N100E MAXIMUM RATINGS ALL RATINGS ARE AT TA = 25°C UNLESS OTHERWISE SPECIFIED. RATING GATE TO SOURCE VOLTAGE CONTINUOUS DRAIN CURRENT SYMBOL VGS ID MIN. - TYP. - IDM TOP/TSTG RθJC PD -55 - CHARACTERISTIC DRAIN TO SOURCE BREAKDOWN VOLTAGE VGS = 0V, ID = 250μA DRAIN TO SOURCE ON STATE RESISTANCE VGS = 10V, ID = 1.5A SYMBOL BVDSS MIN. 1000 GATE THRESHOLD VOLTAGE VDS = VGS, ID = 250μA FORWARD TRANSCONDUCTANCE VDS = 15V, ID = 1.5A ZERO GATE VOLTAGE DRAIN CURRENT VDS = Max. Rating, VGS = 0V VDS = Max. Rating VGS = 0V, TJ = 125°C GATE TO SOURCE LEAKAGE FORWARD VGS = -20V GATE TO SOURCE LEAKAGE REVERSE VGS = 20V TOTAL GATE CHARGE VGS = 10V GATE TO SOURCE CHARGE VDS = Max. Ratingx0.5 GATE TO DRAIN CHARGE ID = 3.0A TURN ON DELAY TIME VDD = 400V, RISE TIME ID = 3.0A, TURN OFF DELAY TIME RG = 9.1Ω FALL TIME VGS = 10V DIODE FORWARD VOLTAGE TJ = 25°C, IS = 3.0A, VGS = 0V TJ = 125°C DIODE REVERSE RECOVERY TIME TJ = 25°C, REVERSE RECOVERY CHARGE IS = 3.0A, diS/dt = -100A/μsec VGS(th) gfs VGS=10V, TC = 25°C VGS=10V, TC = 100°C PULSED DRAIN CURRENT @ TC = 25°C OPERATING AND STORAGE TEMPERATURE TERMAL RESISTANCE JUNCTION TO CASE TOTAL DEVICE DISSIPATION @ TC = 25°C UNITS Volts Amps - MAX. ±20 3.0 2.4 9.0 +150 0.89 140 TYP. - MAX. - UNITS Volts 3.0 4.0 2.0 2.0 3.56 4.0 - - - Amps °C °C/W Watts ELECTRICAL CHARACTERISTICS INPUT CAPACITANCE OUTPUT CAPACITANCE REVERSE TRANSFER CAPACITANCE VGS = 0 V, VDS = 25 V, f = 1.0MHz Ω RDS(ON) IDSS - - Qg Qgs Qgd td(on) tr td(off) tf VSD - - 32.5 6.0 14.6 13 19 42 33 - - 615 - 2.92 1316 117 26 Qrr Ciss Coss Crss μA 10 100 IGSS trr Volts S(1/Ω) - -100 100 - nA nC 25 40 90 55 1.1 Volts - nsec 1800 260 75 nsec μC pF • 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 • • World Wide Web Site - http://www.sensitron.com • E-mail Address - [email protected] • SHD218414 SHD218414A SHD218414B SENSITRON DATA SHEET 780 REVISION - MECHANICAL DIMENSIONS: in Inches / mm .520±.020 (13.2±.508) .510±.020 (12.9±.508) .370±.010 (9.40±.254) .090±.010 (2.29±.254) .370±.010 (9.40±.254) .125±.010 (3.17±.254) .030±.010 (.762±.254) 2 .370±.010 (9.40±.254) .030±.010 (.762±.254) .320±.010 (8.13 ±.254) .610±.010 (15.5±.254) .320±.010 (8.13±.254) .610±.010 (15.5±.254) 2 2 .030±.010 (.762±.254) 3 3 .610±.010 (15.5 ±.254) 3 Copper Terminals .110 (2.79) Max Moly Lid .020±.005 R (.508±.127 ) Alumina Ring .110 (2.80) Max Moly Base Terminal 1 .020±.002 (.508±.051) .060±.010 (1.52±.254) SHD-5 Moly Lid .020±.005 R (.508±.127 ) Alumina Ring Alumina Ring Terminal 1 .130 (3.30) Max Moly Base Terminal 1 .015±.002 (.381±.051) .060±.010 (1.52±.254) SHD-5A SHD-5B PINOUT TABLE DEVICE TYPE MOSFET SHD-5/A/B PACKAGE PIN 1 DRAIN PIN 2 SOURCE PIN 3 GATE DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. • 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 • • World Wide Web Site - http://www.sensitron.com • E-mail Address - [email protected] •