SENSITRON SHD118513A

SHD118513
SHD118513A
SHD118513B
SENSITRON
SEMICONDUCTOR
TECHNICAL DATA
DATASHEET 4765, REV. B
HERMETIC SCHOTTKY RECTIFIER
Very Low Forward Voltage Drop
Features:
•
•
•
•
•
•
Soft Reverse Recovery at Low and High Temperature
Very Low Forward Voltage Drop
Low Power Loss, High Efficiency
High Surge Capacity
Guard Ring for Enhanced Durability and Long Term Reliability
Guaranteed Reverse Avalanche Characteristics
Maximum Ratings
Characteristics
Peak Inverse Voltage
Max. Average Forward Current
Symbol
VRWM
IF(AV)
Condition
50% duty cycle, rectangular
wave form (Single)
50% duty cycle, rectangular
wave form (Common Cathode)
8.3 ms, half Sine wave
(per leg)
TJ = 25 °C, IAS = 3.0 A,
L = 4.4 mH (per leg)
IAS decay linearly to 0 in 1 μs
ƒ limited by TJ max VA=1.5VR
Max.
60
60
Units
V
A
Max. Average Forward Current
IF(AV)
120
A
Max. Peak One Cycle NonRepetitive Surge Current
Non-Repetitive Avalanche Energy
IFSM
860
A
20
mJ
Repetitive Avalanche Current
IAR
3.0
A
Maximum Thermal Resistance
RθJC
DC operation
0.18
°C/W
Max. Junction Temperature
Max. Storage Temperature
TJ
Tstg
-
-65 to +150
-65 to +150
°C
°C
Max.
0.70
0.67
6
Units
V
V
mA
420
mA
2400
pF
EAS
Electrical Characteristics
Characteristics
Max. Forward Voltage Drop
(per leg)
Max. Reverse Current
Symbol
VF1
VF2
IR1
(per leg)
IR2
Max. Junction Capacitance
(per leg)
CT
Condition
@ 60A, Pulse, TJ = 25 °C
@ 60A, Pulse, TJ = 125 °C
@VR = 60V, Pulse,
TJ = 25 °C
@VR = 60V, Pulse,
TJ = 125 °C
@VR = 5V, TC = 25 °C
fSIG = 1MHz,
VSIG = 50mV (p-p)
• 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 •
• World Wide Web - http://www.sensitron.com • E-Mail - [email protected] •
SHD118513
SHD118513A
SHD118513B
SENSITRON
SEMICONDUCTOR
TECHNICAL DATA
DATASHEET 4765, REV. B
MECHANICAL DIMENSIONS: In Inches / mm
.520±.020
SHD-5B
(13.2±.508)
.510±.020
SHD-5A
(12.9±.508)
.370±.010
(9.40±.254)
.370±.010
(9.40±.254)
.370±.010
(9.40±.254)
2
.125±.010
(3.17±.254)
.030±.010
(.762±.254)
.090±.010
(2.29±.254)
2
.610±.010
(15.5±.254)
2
.030±.010
(.762±.254)
.030±.010
(.762±.254)
3
.320±.010
(8.13±.254)
.610±.010
(15.5±.254)
.320±.010
(8.13 ±.254)
.610±.010
(15.5±.254)
3
3
.110 (2.80) Max
Alumina Ring
.110 (2.79) Max
Moly Lid
Terminal 1
.020±.005 R
(.508±.127 )
Copper Terminals
.130 (3.30) Max
Moly Lid
Alumina Ring
.020±.005 R
(.508±.127 )
Alumina Ring
.020±.002
(.508±.051)
Moly Base
Terminal 1
.060±.010
(1.52±.254)
1
2
3
PINOUT TABLE
DEVICE TYPE
PIN 1
DUAL RECTIFIER, COMMON CATHODE (P)
COMMON CATHODE
Note: The Vf curves shown are for the SD200SA60 unpackaged die only.
Typical Forward Characteristics
PIN 3
ANODE
Typical Reverse Characteristics
10
Instantaneous Reverse Current - I R (mA)
1
10
125 °C
2
10
125 °C
1
10
100 °C
0
75 °C
10
50 °C
-1
10
25 °C
-2
10
0
25 °C
0
10
10
20
30
40
Reverse Voltage - VR (V)
50
60
Typical Junction Capacitance
Junction Capacitance - CT (pF)
Instantaneous Forward Current - I F (A)
PIN 2
ANODE
3
2
10
-1
10
0.0
0.2
0.4
0.6
Forward Voltage Drop - V F (V)
0.8
2500
2300
2100
1900
1700
1500
1300
1100
900
700
500
0
.015±.002
(.381±.051)
Moly Base
Terminal 1
.060±.010
(1.52±.254)
10
20
30
40
Reverse Voltage - VR (V)
50
60
• 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 •
• World Wide Web - http://www.sensitron.com • E-Mail - [email protected] •
SENSITRON
SEMICONDUCTOR
SHD118513
SHD118513A
SHD118513B
TECHNICAL DATA
DATASHEET 4765, REV. B
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the
datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical
equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’
fail-safe precautions or other arrangement .
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of
the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any
other problems that may result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at
a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron
Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder
maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When
exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations.
• 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798 •
• World Wide Web - http://www.sensitron.com • E-Mail - [email protected]