SDA175HF series Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, CA 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com 30 nsec 3.0 Amp Three Phase Bridge Rectifier Assembly Designer’s Data Sheet Part Number/Ordering Information 1/ SDA175 __ HF __ │ │ │ │ │ │ │ │ └ Electrical Characteristics Part Number │ │ │ │ └ Screening 2/ └ 600 – 900 Volts __ = Not Screened TX = TX Level TXV = TXV Level S = S Level FEATURES: Reverse Recovery HF = Hyper Fast Family/Voltage J = 600 V K = 700 V L = 800 V M = 900 V Peak Inverse Voltage (per leg) Average DC Output Current TC=Case Temp Reverse Recovery Time Reverse Recovery Time: 30 ns Max Average Output Current: 3.0 Amps PIV: 600 to 900 Volts Hermetically Sealed Internal Discretes Aluminum Case Thermal Conductive Epoxy Encapsulated Available in Higher Voltages Available in Ultra Fast, Fast, and Standard Recovery Peak Forward Surge Current (1 Cycle) Volts 50ºC Amps 100ºC Amps Max ns Amps Maximum Forward Voltage (per leg) @ 1.0 ADC Maximum Reverse Current (per leg) @ PIV Volts 25ºC μA 100ºC μA SDA175J HF 600 3.0 2.4 30 25 1.9 10 250 SDA175K HF 700 3.0 2.4 30 25 1.9 10 250 SDA175L HF 800 3.0 2.4 30 25 1.9 10 250 SDA175M HF 900 3.0 2.4 30 25 1.9 10 250 NOTES: 1/ For ordering information, price, and availability - contact factory. 2/ Screening based on MIL-PRF-19500. Screening flows available on request. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RA0106A DOC SDA175HF series Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, CA 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com SDA175J through SDA175M: *For information on curves, contact the Factory Representative for Engineering Assistance. Design Notes: Insulation Resistance RDC 10M Ω Minimum Operating Temperature TOP -55 OC to +150 OC Thermal Resistance Junction to Lead (Each Leg, L = 3/8”) RθJL 50OC/W Reverse Recovery Time IF = 500mA, IR = 1.0 Amp, Irr = 250mA NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RA0106A DOC