SRL2020 Series Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, CA 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com 20 AMP HYPER FAST RECTIFIER Designer’s Data Sheet 200 Volts 35 nsec Part Number / Ordering Information 1/ SRL2020 __ __ | | | | | | | | | | | | | └ | | └ Screening2/ | | __ = Not Screened | | TX = TX Level | | TXV = TXV Level | | S = S Level | | | └ Package | __ = Axial Leaded | BT = Button Tab | └ Voltage 20 = 200 V Current 20 = 20 A Features: Replaces JEDEC packages: DO-4, TO-254, and TO-257 Hyper fast recovery Low reverse leakage current 3/ Hermetically sealed void-free construction Monolithic single chip construction High surge rating Low thermal resistance Higher voltages available - contact factory Surface mount replacement for 1N5816 and 1N6659 TX, TXV, and Space level screening available MAXIMUM RATINGS Peak Repetitive Reverse Voltage and DC Blocking Voltage Average Rectified Forward Current (Resistive load, 60Hz sine wave, Tc=100°C, TL=55°C ) Peak Surge Current (8.3 ms pulse, half sine wave superimposed on Io, allow junction to reach equilibrium between pulses, TA=25oC) Junction and Storage Temperature Maximum Thermal Resistance Junction to anode terminal Axial @ 1/8” Button Tab Notes: 1/ For ordering information, price, operating curves, and availability, contact factory. 2/ Screening based on MIL-PRF-19500. Screening flows available on request. 3/ PIND testing not required on void free devices per MIL-PRF-19500. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. Symbol Value Units VRRM VRWM VR 200 Volts IO 20 Amps IFSM 400 Amps TJ & TSTG -65 to +175 RJC 6.0 1.5 Axial Leaded (__) DATA SHEET #: RC0155A o o C C/W SRL Button (BT) DOC SRL2020 Series Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, CA 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com ELECTRICAL CHARACTERISTICS (Ta = 25 oC unless specified) Instantaneous Forward Voltage Drop (IF = 20A pulsed) Instantaneous Forward Voltage Drop (IF = 10A pulsed, TA = -65oC ) Reverse Leakage Current (Rated VR, pulsed) Reverse Leakage Current (Rated VR, pulsed, TA = 100oC) Breakdown Voltage (IR = 100 A) Junction Capacitance (VR =10 VDC, f = 1MHz, TA = 25oC) Reverse Recovery Time (IF = 0.5A, IR = 1.0 A, IRR = 0.25A, TA = 25oC) Symbol Max Unit VF1 0.95 V VF2 1.05 V IR1 10 A IR1 1 mA BVR 200 V (min) CJ 150 pF trr 35 nsec CASE OUTLINES: Axial Leaded (__) Dim A B C D P1 P2 Min Max 0.115” 0.135” 0.150” 0.190” 0.500” — 0.038” 0.042” 0.145” 0.155” 0.125” REF Dim A A1 B C C1 P1 P2 P3 P4 T R Min Max 0.125” 0.150” — 0.020” — 0.190” 0.190” 0.210” 0.280” REF 0.145” 0.155” 0.055” 0.075” 0.090” 0.110” 0.060” REF 0.008” 0.012” 0.015” REF CASE OUTLINES: Button (BT) Notes: * Diode body profile may differ from the one shown for illustration **Dimensions prior to solder dipping NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RC0155A DOC