SSDI SDAD102UF_1

SDAD102 UF Series
Solid State Devices, Inc.
14701 Firestone Blvd * La Mirada, Ca 90638
Phone: (562) 404-4474 * Fax: (562) 404-1773
[email protected] * www.ssdi-power.com
2,500 to 15,000 VOLTS
ULTRA FAST RECOVERY
STACKABLE HIGH VOLTAGE RECTIFIER
Designer’s Data Sheet
Part Number/Ordering Information 1/
SDAD10 2 __ __ __ __
└ Screening 2/
│ │
│ │









__ = Not Screened
│ │ │ │
TX = TX Level
│
│
│ │
TXV = TXV Level
│
│ │
S = S Level
│ │
│
│
│ │
│ └ Reverse Recovery Time
│ │
UF = Ultra Fast Recovery Time
│
│ │
└ Voltage 2.5 = 2.5kV, 5 = 5kV,
│
7.5 = 7.5kV, 10 = 10kV, and 15 =
│
│
15kV
│ └
Power Rating (See Below)
│
└ Package Size = 2 Inches Diameter

FEATURES:
Stackable to 600 kV+
PIV 2.5kV to 15kV
High Current Ratings
Ultra Fast Reverse Recovery Time
Only Hermetically Sealed Rectifiers Used
Controlled Avalanche Rated
Modular Design for Easy Stacking
Storage and Operating Temps -65°C to +150°C
Available in Standard, Fast and Hyper Fast
Versions
TX, TXV, and S-Level Screening Available 2/
ELECTRICAL CHARACTERISTICS 3/
Part Number
SDAD102 H 2.5 UF
SDAD102 H 5.0 UF
SDAD102 H 7.5 UF
SDAD102 H 10 UF
SDAD102 H 15 UF
Peak
Inverse
Voltage
Reverse
Recovery
Time 5/
Average DC Output Current 4/
Tc = Case Temperature
Surge
Non-repetitive
PIV (KV)
Max (ns)
If(avg)
Ifsm
25 C
2.5
5.0
7.5
10
15
25 C
70
70
70
70
70
75 C 50 C 60 C
9.00 10.6 10.0
6.60 8.80 8.00
2.00 3.00 2.50
1.50 2.00 1.80
1.00 1.40 1.20
100 C
200
200
125
100
100
Maximum Forward
Voltage Drop
Vf (V)
If (A)
25 C
4.35
6.3
7.92
4.5
10.9
1.5
13.6
1.2
18.9
0.7
Maximum
Leakage Current
@PIV
Ir (uA)
25 C
30
30
15
15
15
SDAD102 Package:
NOTES:
1/ For Ordering Information, Price, Curves, and Availability- Contact
Factory.
2/ Screening based on MIL-PRF-19500. Screening flows available on
request.
3/ Unless Otherwise Specified, All Electrical Characteristics @25ºC.
4/ Tc = 50 ºC typical operation in oil.
Tc = 75 ºC is typical ambient Ta = 25 ºC unheatsunk.
Tc = 60 ºC typical operation with extender plates in air.
5/ Recovery Conditions: IF = 0.5 Amp, IR = 1.0 Amp rec. to .25 Amp.
NOTE: All specifications are subject to change without notification.
SCD's for these devices should be reviewed by SSDI prior to release.
DATA SHEET #: RA0087B
DOC