FR1A THRU FR1M 50V-1000V 1.0A SURFACE MOUNT FAST RECOVERY RECTIFIERS Features • For surface mounted applications • Low profile package • Built-in strain relief • Easy pick and place • Fast Recovery times for high efficiency • Plastic package has UL Flammability Classification 94V-0 Mechanical Data • Case: Molded plastic, SMA (DO-214AC) • Terminals: Solder plated, solderable per MIL-STD-750, method 2026 guaranteed • Polarity: color band denotes cathode end MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 C ambient temperature unless otherwise specified. Single phase half-wave 60Hz,resistive or inductive load,for capacitive load current derate by 20%. SYMBOLS Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current at TL=90 C Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum instantaneous forward voltage at 1.0A Maximum DC reverse current TA=25 C at rated DC blocking voltage TA=100 C Maximum reverse recovery time (NOTE 1) Typical junction capacitance (NOTE 2) Typical thermal resistance (NOTE 3) Operating junction and storage temperature range VRRM VRMS VDC FR1A FR1B FR1D 50 35 50 100 70 100 200 140 200 FR1G FR1J FR1K FR1M UNITS 400 280 400 800 560 800 VOLTS VOLTS VOLTS 600 420 600 1000 700 1000 I(AV) 1.0 Amp IFSM 30.0 Amps VF 1.3 Volts IR 5.0 50.0 uA trr 150 CJ 250 15.0 50.0 -65 to +150 RqJA TJ,TSTG 500 ns pF C/W C Note:1.Reverse recovery condition IF=0.5A,IR=1.0A,Irr=0.25A 2.Measured at 1MHz and applied reverse voltage of 4.0V D.C. 3.P.C.B. mounted with 0.2x0.2”(5.0x5.0mm) copper pad areas E-mail: [email protected] 1 of 2 Web Site: www.taychipst.com FR1A THRU FR1M 50V-1000V 1.0A SURFACE MOUNT FAST RECOVERY RECTIFIERS E-mail: [email protected] 2 of 2 Web Site: www.taychipst.com