TIGER ELECTRONIC CO.,LTD Product specification TPDV1225 25A TRIACS GENERAL DESCRIPTION Available either in through-hole or surface-mount packages, the TPDV1225 triac series is suitable for general purpose AC switching. They can be used as an ON/OFF function in applications such as static relays, heating regulation, induction motor starting circuits... or for phase control operation in light dimmers, motor speed controllers, ... The snubberless versions (TPDV series) are specially recommended for use on inductive loads, thanks to their high commutation performances. By using an internal ceramic pad, the BTA series provides voltage insulated tab (rated at 2500V RMS) complying with UL standards. ABSOLUTE MAXIMUM RATINGS ( Ta = 25 C) O PARAMETER Symbol Value Unit Repetitive peak off-state voltages VDRM 1200 V peak off-state reverse voltages VRRM 1200 V IT 25.0 A ITSM 260 A Tj 110 o Tstg -45~150 o RMS on-state current Non-repetitive peak on-state current Max. Operating Junction Temperature Storage Temperature C C A1 A2 G TO-3P O ELECTRICAL CHARACTERISTICS ( Ta = 25 C) PARAMETER Symbol Test Conditions Min. Max Unit Repetitive peak off-state voltages VDRM ID=0.1mA 1200 — V Repetitive peak off-state current IDRM VDRM=1100V — 10 uA On-state voltage VTM IT=35A — 1.55 V Holding current IH IT=0.5A,IGT=25mA — 150 mA — 150 — 150 T2-G- — 150 T2+G+ — 1.5 — 1.5 T2+G+ Gate trigger Current Gate trigger Voltage T2+G- T2+GT2-G- IGT VGT VAK=12V，RL=30Ω VD=12V，RL=30Ω 1.5 mA V