UNISONIC TECHNOLOGIES CO., LTD LPG05AF-25 LIGHT EMITTING DIODE LED LAMP DESCRIPTION 25 Degree 5mm Round LED Lamp in High Green Color with Water Clear Lens and Stopper. Dice Material: InGaN APPLICATION * Advertising Signs * Indicators * Traffic * Automotive Lighting ORDERING INFORMATION Ordering Number LPG05AF-25 www.unisonic.com.tw Copyright © 2007 Unisonic Technologies Co., Ltd 1 of 4 QW-R125-007.A LPG05AF-25 LIGHT EMITTING DIODE ABSOLUTE MAXIMUM RATINGS (Ta=25℃) PARAMETER SYMBOL RATINGS UNIT Forward Current IF 20 mA Peak Forward Current Ifp 80 mA Power Dissipation PD 100 mW Reverse Voltage Vr 5 V MAX 260℃ for 3sec max (3mm from the base of the epoxy bulb) Lead Soldering Temperature Tsol Electrostatic Discharge Classification ESD CLASS1 ℃ Operating Temperature TOPR -40 ~ +85 ℃ Storage Temperature TSTG -40 ~ +100 Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. ELECTRICAL OPTICAL CHARACTERISTICS PARAMETER Dominant Wavelength Luminous Intensity Viewing Angle Forward Voltage Reverse Current SYMBOL λd IV 2θ1/2 VF IR TEST CONDITIONS IF=20mA IF=20mA IF=20mA IF=20mA VR=5V UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN 520 6000 TYP MAX 530 12000 25 3.0 0 3.6 10 UNIT nm mcd deg V µA 2 of 4 QW-R125-007.A LPG05AF-25 TYPICAL ELECTRO-OPTICAL CHARACTERISTICS CURVES 0° 30° 30° 60° 90° - 1.0 5.0 60° 0.8 0.6 0.4 0.2 0 0.2 0.4 Relative Luminous Intersity Relative Luminous Intensity, IF Ta=25℃ 3.0 60 PG 2.0 40 1.0 20 90° 1.0 + IF - VF UNISONIC TECHNOLOGIES CO., LTD PG 0 1.6 2.2 2.8 3.4 4.0 Forward Voltage, VF (V) 4.8 Relative Luminous Intensity (%) 20 60 40 80 100 Forward Current, IF (mA) www.unisonic.com.tw 0.8 Ta=25℃ 80 0 0 0.6 100 4.0 Allowable Forward Current, IF (mA) LIGHT EMITTING DIODE 3 of 4 QW-R125-007.A LPG05AF-25 TYPICAL ELECTRO-OPTICAL CHARACTERISTICS CURVES Wavelength Characteristics 100Ta=25℃ Relative Luminous Intensity LIGHT EMITTING DIODE 80 60 40 20 0 400 450 500 550 600 650 700 UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 4 of 4 QW-R125-007.A