868.30 MHz SAW Filter • • • • Designed to Band Pass in 868.30 MHz Low-Loss, Coupled-Resonator Quartz Design Simple External Impedance Matching Ultra Miniature Ceramic QCC8C SMD Package SF5902 Absolute Maximum Rating (Ta=25°C) Parameter Rating Unit Input Power Level Pin 10 dBm DC Voltage VDC Between Any Two Pins VDC 12 V Operating Temperature Range TA -10 ~ +60 °C Storage Temperature Range Tstg -40 ~ +85 °C Electronic Characteristics Parameter Nominal Frequency (at 25°C) Sym Minimum Typical Maximum Unit fC NS 868.30 NS MHz IL - 3.5 5.0 dB BW3 - 36.0 - MHz ∆α - 1.5 - dB 25 27 - dB (Center frequency between 3dB point) Insertion Loss Attenuation 855.30 … 881.30 MHz 3dB Bandwidth Passband Ripple 863.00 … 865.00 MHz Absolute Attenuation DC … 753.30 MHz 753.30 … 833.30 MHz αrel 30 35 - dB 903.30 … 1033.30 MHz 30 40 - dB 1033.30 … 1953.30 MHz 20 25 - dB |fA| - - 10 ppm/yr DC Insulation Resistance Between any Two Pins - 1.0 - - MΩ Input / Output Impendance (nominal) - - 50 - Ω Frequency Aging Absolute Value during the First Year NS = Not Specified Notes: 1. The frequency fC is defined as the midpoint between the 3dB frequencies. 2. Unless noted otherwise, all measurements are made with the filter installed in the specified test fixture that is connected to a 50Ω test system with VSWR ≤ 1.2:1. The test fixture L and C are adjusted for minimum insertion loss at the filter center frequency, fC. Note that insertion loss, bandwidth, and passband shape are dependent on the impedance matching component values and quality. 3. Unless noted otherwise, specifications apply over the entire specified operating temperature range. Phone: +86 10 6301 4184 Fax: +86 10 6301 9167 © August 2003 by Vanlong Technology Co., Ltd. 4. The specifications of this device are based on the test circuit shown above and subject to change or obsolescence without notice. 5. All equipment designs utilizing this product must be approved by the appropriate government agency prior to manufacture or sale. 6. Our liability is only assumed for the Surface Acoustic Wave (SAW) component(s) per se, not for applications, processes and circuits implemented within components or assemblies. 7. For questions on technology, prices and delivery please contact our sales offices or e-mail [email protected]. Email: [email protected] Web: http://www.vanlong.com SF5902 868.30 MHz SAW Filter Package Dimensions (QCC8C) Electrical Connections Terminals 1 2 5 6 3,7 4,8 Connection Input Ground Input Output Groud Output To be Grounded Case Ground Package Dimensions Dimensions A B C D Marking Nom (mm) 2.08 0.60 1.27 2.54 Dimensions E F G H Nom (mm) 1.20 1.35 5.00 5.00 Test Circuit 1. F5902 - Part Code F5902 868.3 2. Frequency (MHz) in 5 digits From 50Ω source 3. Date Code: YWW To 50Ω load Y : Last digit of year WW : Week No. Amplitude Response 10 dB/div Typical Frequency Response 30MHz/div Frequency Phone: +86 10 6301 4184 Fax: +86 10 6301 9167 © August 2003 by Vanlong Technology Co., Ltd. Email: [email protected] Web: http://www.vanlong.com SF5902