881.50 MHZ SAW FILTER • Designed to AMPS, CDMA, TDMA Selectivity in 881.50 MHz • Low-Loss, High Attenuation • Simple External Impedance Matching • Ultra Miniature Ceramic DCC6C SMD Package • Complies with Directive 2002/95/EC (RoHS Compliant) SF5906 ABSOLUTE MAXIMUM RATING (TA=25°C) Parameter Rating Unit Input Power Level Pin 10 dBm DC Voltage VDC Between Any Two Pins VDC 12 V Operating Temperature Range TA -30 ~ +80 °C Storage Temperature Range Tstg -40 ~ +85 °C ELECTRONIC CHARACTERISTICS Parameter Sym Minimum Typical Maximum Unit fC NS 881.50 NS MHz IL - 2.7 3.5 dB 3dB Passband BW3 - ±17.6 - MHz Usable Bandwidth BW - ±12.5 - MHz Δα - 0.8 1.5 dB 45 50 - dB 40 45 - dB 20 28 - dB 970.00 … 1049.0 MHz 40 55 - dB 1049.0 … 2000.0 MHz 45 50 - dB |fA| - - 10 ppm/yr DC Insulation Resistance Between any Two Pins - 1.0 - - MΩ Input / Output Impedance (nominal) - - 50 - Ω Nominal Frequency (at 25°C) (Center frequency between 3dB point) Insertion Loss Amplitude Ripple 869.00 … 894.00 MHz 869.00 … 894.00 MHz Absolute Attenuation 10.00 … 779.00 MHz 779.00 … 849.00 MHz αrel 914.00 … 970.00 MHz Frequency Aging Absolute Value during the First Year NS = Not Specified Notes: 1. The frequency fC is defined as the midpoint between the 3dB frequencies. 2. Unless noted otherwise, all measurements are made with the filter installed in the specified test fixture that is connected to a 50Ω test system with VSWR ≤ 1.2:1. The test fixture L and C are adjusted for minimum insertion loss at the filter center frequency, fC. Note that insertion loss, bandwidth, and passband shape are dependent on the impedance matching component values and quality. 3. Unless noted otherwise, specifications apply over the entire specified operating temperature range. Phone: +86 (10) 5820-3910 SF5906 © VANLONG TECHNOLOGY CO., LTD. Fax: +86 (10) 5820-3915 Revision #1 July 06, 2010 4. The specifications of this device are based on the test circuit shown above and subject to change or obsolescence without notice. 5. All equipment designs utilizing this product must be approved by the appropriate government agency prior to manufacture or sale. 6. Our liability is only assumed for the Surface Acoustic Wave (SAW) component(s) per se, not for applications, processes and circuits implemented within components or assemblies. 7. For questions on technology, prices and delivery please contact our sales offices or e-mail [email protected]. Email: [email protected] Web: http://www.vanlong.com Page 1 of 2 881.50 MHZ SAW FILTER PACKAGE DIMENSIONS (DCC6C) Electrical Connections Terminals 2 5 1,3,4,6 Connection Input Output Case Ground Package Dimensions Dimensions A B C D MARKING Nom (mm) 1.5 0.6 1.5 1.8 Dimensions E F G Nom (mm) 3.0 3.0 1.1 TEST CIRCUIT Laser or ink marking SF5906 YWW 1. SF5906 - Part Code From 50Ω source 2. Date Code: To 50Ω load Y : Last digit of year WW : Week No. TYPICAL FREQUENCY RESPONSE Phone: +86 (10) 5820-3910 SF5906 © VANLONG TECHNOLOGY CO., LTD. Fax: +86 (10) 5820-3915 Revision #1 July 06, 2010 Email: [email protected] Web: http://www.vanlong.com Page 2 of 2